Used Powder Plant for sale (4,123)

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Dedpfeq Ngafjx Albjcl Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition Dodsq Nf U Eepfx Albscl A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Dodpfx Aoy Al T Iolbecl Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system for workpieces with dimensions: length 6500 mm, width 1500 mm, height 2200 mm. Dodjvdlfzjpfx Albocl

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Dodpfx Aoiivq Uolbecl Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Contents of the system: ►1 unit - Gas-heated large powder coating oven ►1 unit - Automatic powder coating booth ►1 unit - Electrically heated small powder coating oven ►2 units - Room-type monocyclone manual powder coating booth ►6 units - Automatic powder coating gun ►3 units - Manual powder coating gun ►1 unit - Automatic powder recovery unit ►6 units - Monocyclone ►1 unit - Automatic control panel ►1 unit - Automatic rod movement system, speed-controlled ►2 units - Movable platform, speed-controlled ►8 units - Parking station ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Rods for hanging Our system is located at Anhaltstr. 30, 14943 Luckenwalde. You can schedule an appointment to view the machines. The system has been in operation for 10 years. Since we are the direct manufacturer of the system, we can make any desired modifications to the machines by mutual agreement. Does it not fit into your existing assembly area? Then we can make changes to the layout. Please check the PDF file of the system using the link below.

Year of construction: 2008, condition: ready for operation (used), A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible. Dcjdpfx Aowr Dv Hjlbol

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system Dcedpszv S Tlsfx Albsl BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: new, Year of construction: 2026, functionality: fully functional, Specifically designed for small businesses and wheel coating operations. Complete system consisting of: Dodpfx Aog Ngt Nolbecl Powder curing oven, dimensions: width x height x depth 1200 x 1600 x 1200 mm, 15 kW Powder coating booth, dimensions: width x height x depth 2000 x 2240 x 920 mm Latest powder spray gun from the ROMER ProfiSpray series All together for 17,990.00 net, plus shipping and installation.

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 7,000 mm, total height: 3,000 mm, total width: 2,600 mm, warranty duration: 12 months, 🟦 Semi-automatic Powder Coating Plant – Compact Container System Modern semi-automatic powder coating line built in a container-type enclosure, consisting of a powder coating booth, curing oven, and automatic transport system. This unit is a compact and mobile solution designed for coating small metal parts — ready for operation anywhere after connecting to power supply. Ideal for production companies, workshops, or service providers looking for an efficient and flexible coating system. 🔹 Technical Specifications CURING OVEN - Working chamber dimensions: 4000 x 700 x 1300 mm (L x W x H) - Heating power: 24 kW - Motor: 2.5 kW, 1500 rpm - Radial fan capacity: 4500 m³/h - Thermal insulation: 150 mm - Maximum temperature: 250°C POWDER COATING BOOTH - Working chamber dimensions: 2000 x 600 x 1400 mm (L x W x H) - Filtration unit: * Motor: 2.2 kW, radial fan 12,500 m³/h * Two conical polyester filters L600 * Twist-type filter mounts * Pneumatic powder cleaning system with adjustable cyclic discharge AUTOMATIC TRANSPORT SYSTEM - Travel length: 11,500 mm - Hanger spacing: 250 mm - Number of hangers: 45 pcs - Maximum speed: 4 m/min - Motor power: 0.75 kW 🔸 Features and Advantages * Compact container design – easy to transport and quick to install * Low energy consumption and small footprint Dcodpfx Asxlr Emjlbel * Continuous process ensured by automatic conveyor system * High-efficiency filtration system * Fully equipped “plug & play” unit – ready to start immediately

Condition: used, Lacquer roller machine, roller application machine, powder coating plant -Powder coating system: used for slats/blinds production -Pneumatic components: Manufacturer Festo -Geared motor: WEG 0.25 kW -Dimensions: 3400/850/H1935 mm Dsdpfjgal Anox Albjcl -Weight: 746 kg

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Plus shipping costs – shipping on request. ✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Efficiency Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. ➖➖➖➖➖ Dcedpfx Aljggyk Eebjl ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ✅Twinline-MA Automatic Powder Coating Booth – Perfect Coating, Fast Color Change✅ The Twinline-MA powder coating booth from Proton Maschinenbau has been developed for automatic and manual application in the electrostatic field and impresses with its efficiency, user-friendliness, and outstanding coating results. ✅Innovative design for quick cleaning: Thanks to the insulating PVC floor and the automatic floor cleaning system, dust accumulation is effectively prevented. The booth can be cleaned quickly and easily without entering – for maximum productivity with minimal effort. ✅Intelligent airflow for maximum efficiency: The Fulair technology ensures targeted air extraction at the entry and exit points. This prevents powder loss into the environment and guarantees ideal conditions in both manual and automatic coating areas. ✅Effective powder recovery: The mono-cyclone with downstream filter system enables a high powder recovery rate. The filters are automatically cleaned by means of compressed air, which significantly reduces the maintenance effort. ✅Robust and flexible design: The booth structure is available in powder-coated steel, stainless steel or entirely made of PVC. The solid construction without moving parts ensures a long service life while maintaining low maintenance costs. ✅Quick integration, short installation time: The Twinline-MA can be easily integrated into existing systems and minimizes downtime. All system components are optimally arranged and offer the operator easy access at all times – whether in operation, during color changes or during maintenance. With the Twinline-MA booth, you are investing in speed, quality and reliability. Be convinced by a modern powder coating system that sets new standards! Request now – Make your company fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk silos external: Milk silo 1 - 136000 ltr - Installed 2006 Milk silo 2 - 136000 ltr - Installed 2006 Milk silo 3 - 136000 ltr - Installed 2006 Milk silo 4 - 160000 ltr - Installed 2007 Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 Robots: RWBT 1 - 30000 RWBT 2 - 30000 x2 Final whey silos: Whey silo 1 272000 ltr Whey silo 2 272000 ltr Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine silo x1: Brine silo - 55000 - 2007 Brine mixing silo: Dcjdpezzd Dmsfx Albjl x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 250 kg, Manual powder coating system, suitable for gas cylinder coating Djdpfowhbvpox Albecl

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Dcodpfx Aloffv Tpsbsl Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm 5. Dryer 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) Dedpowfhu Hjfx Albjcl ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 700 kg, temperature: 220 °C, heating capacity: 150 kW (203.94 HP), workpiece height (max.): 2,500 mm, workpiece length (max.): 6,000 mm, Equipment: lighting, Complete powder coating system including pre-treatment, curing oven, conveying system, and assembly For sale is a powerful, well-designed, and fully coordinated complete powder coating system for highly professional coating processes. The system covers the entire manufacturing process – from thorough surface preparation (3 zones) to precise powder application and reliable thermal curing. (Note: A customized design of the system according to customer requirements is possible upon request!) Key data & technical specifications: - Machine type: Powder coating system / complete system - Condition: New machine - System components: - Combined booth for manual/automatic pre-treatment - Walk-in powder coating booth - Powder curing oven - Manual conveying system - Powder gun - Electrical control system including installation - Usable dimensions (oven / booths): Component dimensions up to L x W x H: approx. 6,000 x 1,500 x 2,000 mm - Oven power / connection value: Design depending on the type of heating (gas / electric) and dimensioning (e.g. approx. 80–150 kW electric or a correspondingly designed gas burner) - Scope of supply: Complete system including on-site assembly Detailed overview of the included system components: 1. Combined pre-treatment booth: - Designed for both manual and automatic pre-treatment steps. Ensures optimal cleaning, degreasing, and application of a primer to the workpieces as a basis for durable coating results. 2. Walk-in powder coating booth: - Ergonomically designed, walk-in booth structure for maximum freedom of movement during coating. Enables efficient powder recovery, quick color changes, and a clean working environment. Dsdebhh Awopfx Albocl 3. High-performance powder curing oven: - Uniform heat distribution for homogeneous curing of the powder coatings. Designed for high energy efficiency and stable process temperatures. 4. Manual conveying system: - Robust and flexibly usable transport system for the safe flow of materials between pre-treatment, coating, and curing oven. 5. Ergonomic powder gun: - Modern application technology for uniform powder application, high transfer rates, and first-class surface quality. 6. Central control & electrical system: - Complete electrical control system including wiring, control cabinet, and complete on-site installation, ready for operation. Flexibility & Customization Every manufacturing operation has specific requirements for space, component sizes, and throughput. All components and dimensions of this system can be flexibly adapted to your individual operational conditions and customer requirements. Please do not hesitate to contact us to discuss special dimensions, modified conveying systems, or extended levels of automation.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, warranty duration: 12 months, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Complete powder coating system (curing oven 3.2m + spray booth + Wagner/Gema application + conveying system) Like-new, complete powder coating system including a 3.2m electric/gas curing oven, mobile spray booth, Wagner or Gema application + hanging conveying system (200 kg). Ready for immediate use and flexibly expandable! Customer-specific adjustments possible upon request. Maximum flexibility and efficiency for your surface coating Are you looking for a reliable, high-performance, and immediately usable complete solution for powder coating? This complete powder coating system combines top-class industrial components into a perfectly coordinated overall system. Whether for single-part production, small series, or contract coating – the system offers you the ideal combination of high coating quality, low energy consumption, and well-thought-out material flow. The heart of the system is the generously sized electric or gas curing oven with a usable space of 3.20 x 1.40 x 2.00 [m]. The indirect heating via the integrated stainless steel thermal block and the powerful air circulation ensures excellent, homogeneous temperature distribution, which reliably prevents coating defects. The system is complemented by a mobile spray booth, which guarantees maximum flexibility in the hall area due to its design. Together with the proven Wagner/Gema handheld unit, you can apply a wide variety of powder coatings (from standard organic to metallic) precisely and economically. The included C-rail system, with its approximately 27 meters in length and a load capacity of 200 kg per carrier, ensures smooth, ergonomic transport of your workpieces between coating and curing. Important: Dcedpfx Asb Dxnwjlbjl Does the system not fit 1:1 into your hall? Individual adjustments are possible! Each production facility has its own requirements regarding space, component sizes, and processes. This system can be flexibly adapted to your specific conditions on site. - Tailored dimensions: Oven dimensions or booth sizes can be modified on request. - Expansion of the conveying system: Adjustment of the rail system (layout, switches, usable lengths) to your hall geometry. - Special equipment: Integration of additional components such as pre-treatment, extended control technology, alternative heating methods, or a higher degree of automation. Just contact us! We will examine your layouts and put together a customized configuration for you. Technical data (quick overview) - Condition: New / Unused - Oven interior dimensions (L x W x H): 3,225 x 1,400 x 2,000 [mm] - Max. oven temperature: 220°C - Oven heating capacity: 39 kW (electric or gas, indirect via stainless steel thermal block) - Oven air circulation capacity: 4,500 m³/h - Spray booth dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Booth extraction capacity: 6,000 m³/h; 3 kW - Conveying system: Manual rail system (C-rail, max. 200 kg / carrier) - Powder gun: WAGNER or GEMA Your contact person & contact Do you have questions about the system, would you like a technical data sheet/offer, or would you like to check how the system can be optimally integrated into your production chain? Contact us now without obligation! We will be happy to advise you on technical details, customization options, and delivery conditions.

Condition: new, functionality: fully functional, Year of construction: 2026, Cement Mill & Ultrafine Grinding Mill 🏗️ Introduction to Cement Mill & Ultrafine Grinding Mill In the world of construction and materials processing, achieving the right particle size is essential. Introducing the Cement Mill and Ultrafine Grinding Mill—two pivotal machines designed to deliver superior grinding performance for cement production and ultrafine materials. Let’s dive into their features and applications! 💼 🔥 What is a Cement Mill? A Cement Mill is a crucial piece of equipment in cement production. It grinds clinker, gypsum, and other additives to produce fine cement powder. This machine ensures the optimal particle size for high-quality cement, essential for building robust structures. 🚀 🔧 What is an Ultrafine Grinding Mill? An Ultrafine Grinding Mill is designed to produce extremely fine powders from various raw materials, such as minerals, chemicals, and industrial waste. It operates at high efficiency, delivering ultra-fine materials for advanced applications like coatings, plastics, and ceramics. 🌟 💼 Key Benefits of Using Cement Mill & Ultrafine Grinding Mill Dcedoq Nyydepfx Albol 1. High Efficiency: Both mills are engineered for maximum efficiency, ensuring rapid processing times and reduced energy consumption. 🌿💡 2. Superior Grinding Performance: Achieve consistent, high-quality output with precise control over particle size. 🏭 3. Versatility: Suitable for a wide range of materials, making them essential for various industrial applications. 🌳 4. Durability and Reliability: Built with robust materials, these mills offer long-lasting performance in demanding industrial environments. 💪 📈 Applications in Industry Cement Mill Applications: 1. Cement Production: Essential for producing high-quality cement for construction projects. 2. Infrastructure Development: Used in creating concrete for roads, bridges, and buildings. Ultrafine Grinding Mill Applications: 1. Mineral Processing: Producing ultra-fine powders for advanced material applications. 2. Chemical Manufacturing: Used in creating fine chemicals for various industrial processes. 3. Environmental Applications: Grinding industrial waste for recycling and reuse. ♻️ 🌟 Conclusion Whether you’re in construction, materials processing, or advanced manufacturing, the Cement Mill and Ultrafine Grinding Mill are indispensable tools. Their efficiency, versatility, and superior performance make them a valuable addition to any production line. Contact us today to learn more about these innovative machines and how they can revolutionize your operations! 📞

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time Dedpfx Alswfgbrebscl • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Year of construction: 2019, condition: new, Preparation of a written offer / cost estimate for a powder coating system from the company Romer. Dedpfec Sd D Sox Albocl

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm MACHINE DETAILS Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Tilting table with vertical and horizontal transport Vertical inspection station Unloading station Electrical distribution Deionized water system for the washing machine supply Dedpjyk S Uysfx Albjcl The ovens that may be visible in the pictures are not included in the scope of sale and delivery.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting Dedpfowdtfuox Albecl ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production Dcedpfszqur Hox Albel GEMA OptiStar CG07 Powder Coating Gun

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors Dodpfxezfp Dao Albecl - *Weight : 31.000 kg - *The screen angle varies between 18-27°.

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm Dcodpfx Aszwf Ewjlbol • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm