Used Powder Aspiration for sale (1,207)

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Fgedpfozqur Hjx Ah Eei Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Year of construction: 2023, operating hours: 500 h, condition: like new (used), functionality: fully functional, We offer a complete industrial production line designed for the extraction, purification, concentration and spray drying of collagen derived from fish processing by-products. The production line is designed to process fish skin and fish bones into collagen powder using controlled enzymatic hydrolysis, mechanical separation, filtration, ion exchange purification, evaporation and spray drying. The system integrates multiple processing stages into one industrial production solution. Main Equipment Included 1. Collagen Extraction and Enzymatic Hydrolysis System 3 × stainless steel enzymatic reaction tanks, each with 3,000 L effective capacity SUS316L product-contact surfaces Heating jackets, insulation and agitators Enzyme preparation and acid dosing tanks Pumps, vibrating screen and intermediate storage tanks Temperature, level and pH monitoring Siemens PLC control system 2. Separation System Industrial decanter centrifuge, model LW350, capacity 2–3 t/h Disc separator, model BDY311, capacity 2–3 t/h Stainless steel receiving and storage tanks Transfer pumps and process control system 3. Purification and Decolorization System Anion and cation exchange columns Activated carbon filtration system Stainless steel plate filtration unit Regeneration tanks Heat exchanger and transfer pumps Automated process control 4. Concentration and Drying System Double-effect falling film evaporator Water evaporation capacity: 1,600 kg/h Concentrate holding tanks Industrial spray dryer Spray dryer water evaporation capacity: 150 kg/h Hot air generation and powder collection system 5. Cleaning and Water Treatment Automatic CIP cleaning system with 4 × 3,000 L tanks CIP circulation pumps Reverse osmosis (RO) water treatment system Water treatment capacity: 5,000 L/h Fsdpfx Ahe Ahynvs Esgi Stainless steel process piping and associated equipment Technical Specifications Finished product: Fish collagen powder Nominal production capacity: Approx. 1,000 kg/day Raw material requirement: Approx. 5–6 tonnes/day Steam requirement: Approx. 2 tonnes/hour Electrical power requirement: Approx. 300 kW Compressed air requirement: Approx. 1 m³/hour Cooling system: Circulating cooling water Main process materials: Stainless steel SUS304 / SUS316L Automation: Siemens PLC and touchscreen control systems Production Process Raw material washing → Enzymatic hydrolysis → Filtration → Decanter separation → Disc separation → Ion exchange purification → Activated carbon filtration → Sterilization → Concentration → Spray drying → Powder collection and packaging. Applications The production line is intended for industrial processing of fish-derived raw materials into collagen powder. Potential applications include: Marine collagen production Fish processing by-product valorization Collagen ingredient manufacturing Food ingredient production Nutraceutical raw material processing Final product specifications and suitability for particular applications depend on the selected process parameters, raw material quality and validation. Additional Information The system is designed as an integrated industrial processing line, including extraction, separation, purification, concentration, drying, cleaning and water treatment equipment. Detailed equipment specifications and technical documentation are available upon request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. Fgjdpfx Ahsz Rnu Ts Esi _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. Fedpoz Iww Rjfx Ah Eegi • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3315N130, Year of construction: 2015, total length: 995 mm, total height: 1,600 mm, total width: 1,050 mm, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, electrical fuse: 16 A, space requirement length: 3,000 mm, space requirement height: 2,400 mm, space requirement width: 1,200 mm, Misan is Czech authorized reseller for machining centers and metal AM machines. Concept Laser QM Powder - inertized industrial powder sieve: - For Concept Laser / GE Additive / Colibrium Additive M2 powder containers. Also compatible with M1 and Mlab bottles. May be used with another machines with compatible bottles. - Suitable for steel, aluminum, inconel, titanium alloys. - Size: 1050 x 995 x 1600 mm - Weight: 350 kg - Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz - Requires inert gas supply: argon or nitrogen, 5 bars Equipment used by customer. First installed in 2015. Fully refurbished by Misan now (new seals, filters, hoses, overflow bottle,...), clean and functional. New container console. Original price: 25.000 Eur We are awaiting your contact. Video conference can be set up if needed. Sieving station can be seen at our showroom. Visit is possible upon contact. Fsdpoz Tf Hfefx Ah Eogi

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 31,000 mm, total height: 4,000 mm, total width: 8,000 mm, workpiece weight (max.): 100 kg, input voltage: 230 V, workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, fuel: electricity, sheet thickness steel (max.): 900 mm, We offer this ready-to-use GEMA powder equipment with single stage pre-treat systems and 2 x ovens, manufactured in 2012. Manufacturer: GEMA Construction year: 2012 Fgedps Agc D Sofx Ah Esi Equipment type: Powder coating equipment Full working Compact Powder Coating Plant consists of below 1 x SINGLE STAGE PRE-TREAT PLANT 1 X DRY OFF OVEN 1 X GEMA QUICK COLOUR CHANGE POWDER BOOTH WITH RECIPROCATORS, CYCLONE AND AFTER FILTER 1 X OVERHEAD CONVEYOR SYSTEM 1 X TUNNEL OVEN If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Fodpfxjq Nf U Ej Ah Eogi Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: ready for operation (used), functionality: fully functional, A well built Pedestal Auger Filler from Webb Automation - controls have been simplified and replaced - original hardware and drive units - stainless steel contact parts throughout - three phase supply - automatic level probe to control a separate infeed device - complete unit working well Mounted on frame with castors and jacking feet Height Adjustable platform under outlet Ideal Powder Filler for filling bags or containers Request videos and pictures via Whats App Fgedpfx Ahj Adq U Io Eji Ready to ship worldwide

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: Fedpfx Ahjq Nf Uwj Esgi 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Fgodpfjwhbnlox Ah Esi

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Fjdpfx Aheyc S Hto Ejgi Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: used, Main control room (1 rack, 1 control panel) Dimensions: LxWxH: 5000 x 900 x 2500 mm. Note!: continues on multiple floors Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Fjdpfxj Ahyibe Ah Eogi Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: FD-SPA (291, Bj.2014), FD-SPA-A (334, Bj.2015), total height: 2,300 mm, total width: 900 mm, total length: 1,500 mm, overall weight: 250 kg, type of input current: AC, input voltage: 230 V, compressed air connection: 1 bar, pressure: 6 bar, input current: 10 A, Equipment: documentation/manual, MCPI Fine Dosing FD-SPA / FD-MPA-A Precision Powder Dosing Systems (2 units) For sale are two high-quality precision dosing systems from a food processing plant. (Spices) The systems were used for dosing spices, flours, and other powdered raw materials and were in productive use until recently. Both machines are fully functional and can be inspected or demonstrated. The MCPI systems are particularly suitable for the precise gravimetric dosing of: Spices Flours Baking ingredients Dietary supplements Food additives Powdered chemical products Granulates and bulk solids Technical data, Machine 1 Type: FD-SPA Manufacturer: MCPI Year of construction: 2014 Machine No.: 291 Equipment Gravimetric powder dosing Stainless steel dosing hopper Schneider Electric Magelis Touchpanel PLC control Vacuum conveying Control cabinet Work table Food-grade design Dimensions (approx.) Length: 1,500 mm Width: 900 mm Height: 2,300 mm Weight: approx. 250 to 350 kg Technical data, Machine 2 Type: FD-MPA-A Manufacturer: MCPI Year of construction: 2015 Machine No.: 334 Technical design Opti-Filler FD-MPA-A Weighing cell, Class A Dosing width 60 mm Storage hopper 15 liters Powder weighing Color touchscreen 5.7" Low level alarm Fgedpfoz Hxbbex Ah Eoi Vacuum conveying Dimensions (approx.) Length: 1,500 mm Width: 900 mm Height: 2,300 mm Weight: approx. 250 to 350 kg Condition ✅ Fully functional ✅ Used in production until recently ✅ Very well-maintained condition ✅ Immediately available ✅ Original documents and invoices available ✅ Functional demonstration possible by arrangement New price Verifiable investment value: System 2014: approx. €35,000 net System 2015: approx. €28,000 net Total investment: over €63,000 net Scope of supply 2 complete MCPI dosing systems Dosing stations Vacuum conveying systems Control cabinets Touch operating devices Work tables Available documentation Location 56355 Nastätten Price €22,500 negotiable for both systems Individual sale possible by arrangement. Keywords: MCPI Fine Dosing, Powder Doser, Spice Doser, Flour Doser, Dosing System, Bulk Solids Technology, Food Technology, Dosing System, Powder Conveying, Vacuum Conveying, Opti-Filler, PLC Control, Weighing Technology, Packaging Technology.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm Fgodpsx H Tadofx Ah Eoi - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 50,000 mm, We offer this Nordson automatic powder coating line, in very good condition, manufactured in 2016. It is fully operational, so you can visit it any day to see exactly how it works. Fodpfxsz Dhk He Ah Eegi It includes a degreasing area with an acid bath, followed by drying/preheating, painting, and polymerization. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Fgjdo Af I Hdjpfx Ah Eoi Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Fsdpfxoy Al T Ij Ah Esgi Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fodpfx Asvlwkxeh Eegi Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Condition: used, functionality: fully functional, 2x Sulzer Unicoat Powder Coating Systems Please view all the sale related information on AllSurplus. Fedoz Hc Thepfx Ah Eogi

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 300 kg, workpiece height (max.): 1,800 mm, workpiece length (max.): 7,200 mm, fuel: domestic gas L, Eisenmann Powder Coating System – Complete System for Sale A high-quality, industrial powder coating system from the renowned manufacturer Eisenmann is for sale. The system was installed in 1995 and has been continuously modernized and kept up-to-date technologically. It is currently in operation and can therefore be inspected under real operating conditions. The system is characterized by its high reliability, robust industrial design, and long-term operational safety. Thanks to ongoing modernizations, it offers an economical solution for companies looking to expand their coating capacity or replace an existing system. Technical Data • Manufacturer: Eisenmann • Year of Construction: 1995, but continuously modernized • Condition: In operation / ongoing production • Maximum workpiece dimensions: 600 × 1,800 × 7,200 mm (W × H × L) • Water dryer: max. 290 kW (natural gas), modulating, manufacturer Elko • Powder dryer: max. 460 kW (natural gas), modulating, manufacturer Elko • Heating boiler: max. 460 kW (natural gas), modulating, manufacturer Elko • Workpiece weight / carriage: 35 carriages with a workpiece weight of 300 kg • Coating technology: Automatic powder coating with Gema Magic-Cylinder system • Manual coating: Gema manual coating system for rework and special parts • Modernizations: Continuously updated to the latest technology • Pretreatment: renewed in 2024/25 by Euroimpianti, a 5-chamber system independent of chemical suppliers was installed. The system is currently operated with Alufinish chemicals in a chrome-free process. The pretreatment has a fully automatic Medotec chemical dosing and monitoring system. The pressure pumps are also monitored to ensure that the pretreatment is 100% effective. The chamber width is designed for 700 mm. The cycle time is currently 5 minutes/chamber, but can be adjusted individually. Fjdpfjz E R Abjx Ah Ejgi System Equipment • Conveying technology with automatic workpiece transport • Pretreatment area • Drying and curing technology • Automatic powder coating • Powder recovery system • Gema Magic-Cylinder application technology • Gema manual coating system with corona and tribotechnology • Control and regulation technology • Wastewater treatment • Demineralized water treatment, 2-fold redundant Special Advantages • System is currently in productive use • Continuously maintained and modernized • Proven Eisenmann quality for continuous industrial operation • Suitable for large and long workpieces • High coating quality and process reliability • Immediate availability upon agreement • Large package of spare parts for pretreatment/pumps/application/conveying technology available The system is particularly suitable for companies in the fields of metal processing, steel construction, mechanical engineering, vehicle construction, and industrial contract coating. Since 2015, the system has consistently achieved GSB Master Seaproof certification. An inspection of the system is possible at any time by appointment. We will gladly provide further technical documents, layout drawings, photos, as well as information on throughput, oven dimensions, and conveying speed to interested buyers. Price: Negotiable Location: 7344 Stoob

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Fgedpfx Ajx R N Ureh Esi Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, IKA MHD 2000/10 powder wetting and dispersing machine, capacity 2500 liters/hour, solids capacity max. 1300 liters/hour, rotor speed 4200 rpm at 50 Hz, 18.5 kW motor suitable for frequency converter 20-60 Hz, product temperature max. 135°C, operating pressure -1 to +16 bar, operating pressure double jacket max. 2.5 bar, liquid inlet DN 25, solid inlet DN 65, outlet DN 50, product contact parts stainless steel AISI 316L or AISI 316Ti9, frame and lantern piece stainless steel AISI 304, weight approx. 400 kg, used in the production of plant-based proteins (pilot plant) Fedpfjzu I Tfjx Ah Eogi

Condition: used, Powder coating booth with multi-cyclone and after-filter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with after-filter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and after-filter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth substructure with inlet, manual coating opening, and spray gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / After-filter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power after-filter: 15 kW with 12 filter plates (air volume flow: 8000 m³/h) 22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Fsdpfx Ahez Nyqwj Ejgi Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: 7,500,- € net (plus VAT). "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robust and, thanks to the generous manual coating opening, is ideal for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For powder coating: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: Fjdpfjz N Aivex Ah Eogi • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is extracted downwards. The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be reprocessed and reused in the cycle (enormous material savings!). • Cleaning unit: Unit mounted on top including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire extinguishing system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, NRW) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). "We offer you a suitable bank financing option for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 5x Ventilator 7,5kW Total power apprx. 45.000 m3 / hr. Recuperation system for returning the hot air back Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Year 2010 Possible to sell immediately only as a complete set. Fgjdpfx Aherft Ais Eoi