Used Polyester Granules for sale (920)

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Chjdpfx Asza Ahcoatjd Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Cjdpezxq U Hofx Aatehd Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling - Fully hinged, dust-tight lid - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2012, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 01645, type of input current: three-phase, filling weight (max.): 50,000 g, filling weight (min.): 5,000 g, input voltage: 380 V, input frequency: 50 Hz, PAYPER PB-12/CG semi-automatic bagging machine for open-mouth bags, equipped with a digital electronic weighing controller EWC PLUS (EWC+). Year of manufacture: 2012. Serial number: 01645. Operating hours: 100 h. Condition: like new and fully functional. Inspection while running is possible. Gross weight weighing system: the product is weighed directly in the bag during filling. CG dispensing by gravity using a pneumatic gate, with rapid feed and fine dispensing. The operator places the bag, and the system performs the dispensing and weight control. Suitable for free-flowing products such as cereals, seeds, plastic granules, and granular fertilizers. Chsdpo Agv Rmofx Aatjd Equipment included: EWC PLUS controller, frame, conveyor belts, and bag sewing machine. Electrical power supply: 380 V three-phase, 50 Hz. Compressed air consumption: 8 liters per cycle.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Chjdpfxs Afnqce Aatsd Below are the specifications of the proposed model: Screw diameter: 42 Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Effective penetration ratio: 1.5

Year of construction: 2023, condition: excellent (used), meant working condition, 6m pipe shredder with granulator and double bag stand shredder motor 37kw x2, granulator motor 90kw Chjdpfx Ajz Ektyjatsd output capacity 700-800kg p/h

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. 1. Equipment for production and material preparation 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. Chedpfx Aao Agwbaetod 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, FREWITT MG-800 OSCILLATING SCREENING AND GRANULATING MACHINE Pharmaceutical version – Stainless steel – Comprehensive documentation DESCRIPTION For sale is a Frewitt MG-800 oscillating screening and granulating machine in high-quality stainless steel/pharmaceutical version. The machine is in very good and well-maintained condition and is fully functional. The MG-800 is suitable for the controlled crushing, granulation and screening of products, especially in the pharmaceutical, chemical and food industries. The oscillating operating principle, in combination with interchangeable screen inserts, allows for adaptation to different products and desired particle sizes. PHARMACEUTICAL/STAINLESS STEEL VERSION The original Frewitt specification documents a high-quality stainless steel design: - Machine body stainless steel 1.4401 - Product-contacting parts stainless steel 1.4301 - Product-contacting interior surfaces polished - High-quality, hygienic design - Enclosed machine design The system was designed for professional use in demanding production environments. TECHNICAL DATA Manufacturer: Frewitt, Switzerland Model: MG-800 Machine No.: 1289892 Machine type: Oscillating screening/granulating machine Voltage: 380 V Frequency: 50 Hz Current consumption: 4.4 A Version: Stainless steel / Pharmaceutical version EQUIPMENT - Frewitt MG-800 granulating machine - Stainless steel feeding system - Stainless steel discharge system - Rotor - Screen basket Chjdpfx Asvt Sywsatjd - Extensive selection of various screen inserts - Infinitely adjustable speed control - Protection and safety devices - Separate operating/control unit - Sturdy stainless steel base - Extensive stainless steel piping and connections The various screen inserts available allow for flexible adaptation to different products and desired granule or particle sizes. DOCUMENTATION Extensive original Frewitt documentation is available for the machine, including: - Technical documents - Original drawings - Design drawings - Specification and material specifications - Spare parts/component information The available original documentation is particularly advantageous for use in pharmaceutical and industrial environments. CONDITION / FUNCTION The machine is in very good used condition and is fully functional. Inspection and test run are possible by arrangement at our premises. Price on request. Subject to prior sale and errors.

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. It features a robust construction, a proven VEM 7.5 kW motor, and a three-phase 400 V power supply. The machine has a large feed hopper, convenient service access, and a control cabinet with an emergency stop button. The installed low-speed three-phase motor provides high shredding power while maintaining stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Performance suitable for medium and large injection molding machines Cedpfx Aajz Sk Dustshd • German quality • Robust frame and blade construction In very good condition, mechanically inspected, and ready for operation.

Condition: excellent (used), GRANULATE DUST REMOVAL We have 5 units available from a company liquidation. Granulate dust removal machines reliably eliminate quality risks such as streaks and cloud formation on visible surfaces. The granulate dust remover efficiently removes fine dust and ensures clean, high-quality plastic granulate. This reduces rejects, prevents production disruptions, and ensures consistently high product quality. Chjdpfx Aey N R Nbsatod Ideally, I would prefer if you already had such a device in use, as I only deal with the elimination of injection molding defects and am not familiar with the machines themselves.

Condition: used, Colortronic Dry-Flex Granulate Dryer, Plastic Dryer, M400 For sale is a used granulate dryer, type Dry-Flex M400, from the manufacturer Colortronic. Technical details (according to the nameplate): - Manufacturer: Colortronic, Friedrichsdorf (Germany) - Model: Dry-Flex M400 - Year of manufacture: 11/2012 - Control panel: 6AV6642-0BA01-1AX1 - Operating voltage: 400 V / 50 Hz - Heating power: 33 kW - Drive power: 5.5 kW - Operating pressure: max. 6 bar - Design: Granulate dryer / Plastic dryer - Application area: Plastic processing, injection molding, extrusion Codpfxjxlqztj Aatohd - Condition: Used, functional Buy Colortronic Dry-Flex M400 granulate dryer and other items at a favorable price – Here you buy products from a professional for professionals – You will find more attractive offers in our SHOP. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz Cjdpfx Aas Ah Ei Nstjhd AC control voltage: 230 V, 50 Hz DC control voltage: 24 V Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dosing speed: 102 rpm EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Note: The machine is sold without a melt filter, water bath, and strand granulator.

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Cedpfozb Dp Rox Aatohd Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Chodpfx Aaezu Tu Ietsd Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: good (used), Year of construction: 1993, SHEER Granulator Regretfully, 5.5 kW motor Chodpfxeip N Uno Aatjd 1 new milling cutter available as an option: €4,000

Condition: used, Year of construction: 1984, functionality: fully functional, Used granulate classifier Fully functional Year of manufacture: 1984 Chedpfx Aow Nfizeatjd

Condition: used, Year of construction: 2022, The lot consists of: PET bottle granulator ZERMA GSH-800; AMIS; S/N GSH 800/1200-S7-3 #11783 (2022); 132 kW; rotor 800 x 1,200 mm; 10,400 kg; approx. 1 t/h with 12 mm screen (technical details available for download as a PDF in "Essential information") Friction cleaner FR 800-2000; R&K; S/N 100009/2014; friction cleaning unit Turbo Washer HW 83E - unit 1; STF; Approx. 2,026 x 1,480 x 2,472 mm; 22 kW; 1,760 rpm; 400 V Turbo Washer HW 83E - unit 2; STF; S/N hw8e14/01; 2014; Approx. 2,026 x 1,480 x 2,472 mm; 22 kW; 1,760 rpm; 400 V Friction cleaner FR 800-2000 - multiple units; STF / R&K; Approx. 2,700 x 2,000 x 2,200 mm; 2,400 kg; rotor 800 x 1,800 mm; 87 mixing elements Csdpfxj Ahhm Uo Aatehd Flotation tank - multiple units; R&K; Approx. 13 m3 capacity; conveyors, motors and mixing drums Inverting screw conveyors - multiple units; R&K; 2.2 kW; 400 V Blowers TRL 40/75 - multiple units; Kongskilde; 5.5 kW; 400 V; 50 Hz Cyclones - multiple units; Kongskilde; auxiliary air separation equipment Magnetic trap MSV 200/7; Magsy; S/N 1259; 2022; 200 mm inlet/outlet; neodymium magnets; approx. 5.2 kg Zig-zag separator with two TR

Condition: used, Year of construction: 2006, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V configuration. Technical specifications: Chsdpfxjz Hmtxe Aatjd Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Rotating knives: 5 rows arranged in a V configuration Power supply: 400 V, three-phase, 50 Hz CE marking + includes Blower

Year of construction: 2006, condition: used, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V-shaped configuration. Technical specifications: Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Rotating knives: 5 rows arranged in a V-shaped configuration Power supply: 400 V, three-phase, 50 Hz Chjdpfx Asz Hmpteatsd CE marking + includes Blower

Condition: used, No. 04554 Granulator / cutting mill Alpine RO 40/63 Used Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Chsdpfx Aasz Iav Asted Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1975, Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Chedpsx R Av Nofx Aated Motor power : 1,5 KW Rotor dimensions: length 44 cm / diameter 13 cm Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total width: 900 mm, total length: 900 mm, total height: 1,800 mm, energy consumption: 11 kWh, Equipment: CE marking, documentation/manual, We offer this new RPE RPE-110 plastic/Cable/wood etc processing machine, year of construction 2025. The machine is designed for efficient shredding of both soft and hard plastics. It can also process materials such as cardboard, paper and wood, making it a versatile solution for recycling and waste-processing applications. The cutting rotor is fitted with 15 movable knives arranged in three rows, working together with 2 fixed knives mounted on the cutting chamber cover. The cutting chamber can be opened easily, providing convenient access for inspection, cleaning and maintenance. This design also allows the cutting knives and screen to be replaced quickly. The knives can be sharpened and reused several times, helping to reduce operating costs. Technical Specifications Motor: 11 kW, 400 V Capacity: up to 650 kg/h, depending on the type of material Screen perforation: 10 mm Rotor diameter: 260 mm Rotor speed: 560 rpm Cutting system: 15 movable knives + 2 fixed knives Cutting chamber: 500 × 370 mm Noise level: 80–95 dB Machine dimensions: 1420 × 1030 × 1410 mm Net weight: 780 kg The cutting chamber measures 500 mm in width and 370 mm in length. A 10 mm screen is supplied as standard, while a 6 mm screen is also available as an optional accessory. The crusher is suitable for processing a wide range of materials, including: Plastic bottles Wooden boards Various plastic products such as soles, strips, profiles, mouldings and film Materials containing small amounts of metal, such as cables and electronic boards Paper, cardboard and paper waste Rubber products With a rotor speed of 560 rpm, the machine is designed to minimize heat generation and prevent excessive melting of the processed material. The powerful 11 kW motor, combined with the heavy-duty flywheel, provides sufficient power for processing demanding and hard plastic materials. The machine can achieve a throughput of up to 650 kg/h, depending on the characteristics and type of material being processed. A practical pull-out waste drawer allows the processed material to be removed quickly and conveniently. The drawer is fitted with four wheels for easier handling. Easy access to the cutting chamber simplifies routine maintenance, inspection and knife replacement. The machine is equipped with a main power switch, emergency stop and clearly arranged control panel. Safety systems are designed in accordance with the applicable EU safety requirements. For optimum performance, the material introduced into the machine should be pre-cut or supplied in a suitable size. The appropriate input fraction depends on the type and characteristics of the material. Safety and CE Certification The crusher is CE certified. Each opening/cover is fitted with a limit switch, preventing the machine from operating while the cutting chamber is open during maintenance or inspection. Drop Chamber Dimensions Width: 500 mm Height: 260 mm The machine is fitted with adjustable support feet, allowing accurate horizontal leveling during installation. Optional Equipment Chsdpfjz Ikwdox Aatjd For an additional charge, the machine can be supplied with a waste drawer equipped with an exhaust connection, suitable for connection to an external extraction system. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table Chedpfxeufi Rxs Aated

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Chjdpfxex U Dvle Aatjd Type: Tyre shredder Input material: Car tyres, sports flooring Required particle size: Pre-shredded to max. hand size / < 100 mm see PDF

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm -Weight: 56 kg Codpfx Aoy R S Tweatohd

Condition: used, Labotek Type: FMD-M-M-15-15-V, Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of systems for material drying, dosing, and conveying in the plastics industry. The FMD-M series includes modular dryers designed for processing plastic granules. Technical specifications of the FMD-M series: Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volts: 3x400 Vac+PE Amps: 10.4 Amps Overcurrent protection: 16 Amps kW: 2.6 kW HZ: 50/60HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Chsdszii Dbjpfx Aatjd Conveying capacity: Up to 15 kg/h Conveyed medium: Free-flowing, granular raw material (minimum grain size of 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.