Used Polyester Granules for sale (857)

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a Hodpfxou Thh Eo Ab Ijk bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Wexiödisk WD-100GR pellet washer The WD-100GR is a granule pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with an efficient spinning wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing unit No pre-washing or scrubbing by hand thanks to powerful washing with water and granules Great hygiene and fast drying with spin cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be performed from the front or the side Effective dishwashing and high capacity with double rinse system Financing through our bank is also possible. Hedpfx Aef Hp Tpjb Iek komplett-konzept.leasingo.de You can find more dishwashers in our store International shipping on request!

Condition: ready for operation (used), There are two granulators available, output WPC: 2t/h, hole diameter: 5.3mm, hole layout: 2x16/ 2x19/ 2x22/ 2x25/ 2x28, length: 1100mm, width: 700mm, height: 800mm, with control cabinet, machines were barely used. Hodpfx Absd A Nnao Isk

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Hodpfx Abon Tpmue Iok

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Hodpfx Abjn Tpmxe Isk

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Hedpfx Abjucw S Ss Iek

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Hodjwk Nk Topfx Ab Ijk

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Hjdpfeydp Abjx Ab Ijk

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Hsdpoufi Rxefx Ab Isk Stator blades: 2 plus blade set: 2 Blade setting table

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition Hjdpfxsra N A Nj Ab Iek make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Hodpfjghmptjx Ab Iek Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet line and pellet mill We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 1t/h TSF press pellet mills - engine power from 7.5 kW to 45 kW Granulator TSF200 with two rollers Performance ~60-200 kg/hour Engine power 7.5kW The thickness of the matrix is ​​3.2 cm The pellet diameter (specified when ordering) is standard 6mm Number of pressing rollers 2 pcs Machine weight ~350kg Granulator TSF230 with three rollers Performance ~100-250 kg/hour Engine power 11kW The thickness of the matrix is ​​3.5 cm The pellet diameter (specified when ordering) is standard 6mm Number of pressing rollers 2 pcs Machine weight ~350kg Granulator TSF260 with two rollers, rotating matrix Hodeghmnrepfx Ab Ijk Productivity ~150-300kg/hour Engine power 15kW The thickness of the matrix is ​​3.5 cm The pellet diameter (specified when ordering) is standard 6mm Number of pressing rollers 2 pcs Machine weight ~450kg Granulator TSF360 with three rollers, rotating rollers Productivity ~ 250-500 kg/hour Engine power 22kW The thickness of the matrix is ​​4 cm The pellet diameter (specified when ordering) is standard 6mm Machine weight ~750kg Granulator TSF400 with three rollers, rotating rollers Productivity ~ 350-700 kg/hour Engine power 30kW The thickness of the matrix is ​​4 cm The pellet diameter (specified when ordering) is standard 6mm Machine weight ~850kg Granulator TSF450 with three rollers, rotating rollers Productivity ~ 450-800 kg/hour Engine power 45kW The thickness of the matrix is ​​4 cm The pellet diameter (specified when ordering) is standard 6mm Machine weight ~1000kg The machine has a warranty period of 12 months. CE Certificates

Condition: good (used), Year of construction: 1994, Manufacturer: ZANCHETTA Machine type: GV 50 Rotomix Year of manufacture: 1994 Capacity:50 liter Minimal operating capacity: 12 liter Maximal operating capacity: 33 liter Inside depth: 450mm Inside height: 320mm Hjdpfx Aenp Hrqsb Iok Weight: 850 kg Parts of machinery: 1.Roto mixer Granulator 2.Oil dynamic unit 3.Vacuum / condensation unit 4.Heating unit

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: 2400877, Plastic Granulator – DIPRE HERCULES 340 (11 kW) - Fully Functional – Fan/Piping/Cyclone Included Hjdpfxsyhnndj Ab Ijk DIPRE s.r.l. (Italy) HERCULES 340 industrial central granulator. Key specification: - Year of construction: 2004 - Drive power: 11 kW - Electrical: 3×380 V / 50 Hz - Weight: approx. 820 kg - CE marked - without user manual The machine is fully functional just removed from production. The granulator and the suction/blower can be switched independently on the control panel (for pneumatic conveying). Capacity: depends on the processed material and the screen size. The screen is replaceable; included accessory: 1× 4 mm screen. Free of charge (included with the machine): - suction fan - piping - separating cyclone These items are functionally working, but their condition is poor / refurbishment recommended, therefore they are included free of charge.

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Hodpfx Abem Sg Hce Isk

Year of construction: 2022, condition: new, functionality: fully functional, overall weight: 9,500 kg, total length: 2,750 mm, total width: 2,670 mm, total height: 4,630 mm, rotational speed (min.): 520 rpm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Grinding space : 1200 x 1100 mm Drive motor power : 110 kW Knives on rotor : 7 x 2 Fixed knives : 2 x 2 Weight : 9500 kg The GXC series of mills, using motors from 55kW to 315kW, is specially designed for high efficiency of the grinding process. Thanks to a variety of rotor configurations, these mills have a wide range of applications for small and hollow materials such as plastic drums, crates and chairs, very flexible materials such as foils, big bags, and rubbers. They are also suitable for grinding thick and hard materials such as plastic board profiles. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. (dozens of machines in stock) Hedporbk Hcsfx Ab Iek If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 201023, DICER MOD. F-36 HEAVY SERIES SOUNDPROOF DICER for granulating continuously extruded plastic sheets, for thermoplastic products. Maximum width of the sheet to be ground 350 mm and thickness 6 – 8 mm. HP 20 V. 400 Hz 50 motor Rotor in wear-resistant steel with high chromium content, multiple blades with 14 cuts and speed from 10 to 30 m/min. Transmission by belts Steel towing rollers with progressively variable trino speed and in accordance with the number of cuts. Size of the granule obtained 3 x 3 mm Pneumatic presser Base in solid steel structure The machine is soundproofed Electrical panel in compliance with CE standards with remote control switch and safety micro. Hedpfxov Tadwj Ab Iok SPEED VARIATOR WITH INVERTER

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Hedpfsyf E N Tjx Ab Ijk Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Year of construction: 1994, condition: good (used), -Cutting mill / granulator -working width: 600 mm Hodpfxoh Havts Ab Iek -rotor diameter: 400 mm -with sound insulation

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel Hodpjh Rwc Ejfx Ab Iek -Year of construction 1998 - made of stainless steel - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Condition: used, functionality: fully functional, Plastic Granulation Line + for Spare Parts The line includes: -Extruder: CINCINNATI MILACRON CM65HP, year of manufacture 1996 -Granulating head -Granulate cooling system -Cyclone: GAMART -Raw material pneumatic conveying system ADDITIONAL EQUIPMENT -Single-screw co-extruders – total of 9 units -Raw material transport: -Pneumatic (powders, granules) -Mechanical (screw conveyors, 2x chain-type redler conveyors) -2 x trough mills – for grinding PVC profiles Technical condition: equipment is fully operational, currently in use in production Hjdjyda Egepfx Ab Iek Applications: -Plastic granulation (PVC, other types) -Co-extrusion Documentation and photos available upon request.

Condition: used, Year of construction: 1997, Manufacturer : Aeromatic TK Fielder (GEA) Model: Pharma Matrix 150 Year : 1997   Type : Granulator / high speed mixer Application : Granulation Sector : Pharmaceutical / Chemical / Cosmetics   Material : stainless steel Tank volume : 150 L Jacket : 2 bars / 80°C max Main agitation : 130 - 260 rpm Power : 11 KW Variable speed drive: electric Chopper / granulation: 1500 / 3000 rpm CIP self-cleaning: seals and tank GMP: Good manufacturing practice : safety / contamination CASTELL safety key Discharge valve: pneumatic Bag filter Primary sealing: inflatable seal Secondary seal: compressed air purge Compressed air: 6 bars Electrical cabinet Hjdpex R Dbmefx Ab Iek Video available in operation Digital documentation

Condition: used, Year of construction: 1998, Manufacturer: Zanchetta (Romaco Group) Model: Rotolab Year : 1998 Type : High shear granulator mixer Capacity : 2 Litres Opening : lid Double heating jacket Hsdpfx Aex R A Ifjb Iek Crumbler = 1500 rpm Variable mixing speed : 20 – 955 rpm Heating integrated into the double jacket. Max. Max. bowl temperature 85°C, Heating jacket Connection for vacuum and nitrogen (.), Materials: Stainless steel Operating pressure: 0.6 MPa Becker vacuum pump: 1.25 KW    

Condition: used, Year of construction: 1975, Manufacturer : Frewitt Hsdpfx Aex R Av Neb Iok Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Rotor dimensions: length 44 cm / diameter 13 cm Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available.

Condition: used, Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant -Manufacturer: Walther Trowal, drying granulate type GM Hjdsrxw E Eopfx Ab Iok -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg