Used Filtration Plant for sale (4,164)

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter Chedpforai N Aox Agrjd - Control cabinet

Condition: used, Kieselguhr plate filter, 60 x 60 cm with 35 frames and 34 plates, manual pressing. Complete filtration plant consisting of: - kieselguhr plate filter - kieselguhr dosing vessel with agitator - kieselguhr dosing pump - feed pump - flow meter Additional title: Frame filter with agitator tank, dosing pump, feed pump and flow meter Cjdpexbpiusfx Agrehd Number of frames: 35 Number of plates: 34 Length: 4,7 m Width: 0,8 m Height: 1 m Weight: 2500 kg

Condition: used, Year of construction: 1993, Additional title: Microfiltration Material: stainless steel Base construction: on stainless steel frame with feet Chjdpjztwz Njfx Agrsd Features: 32 filtration modules, pumps, pipes, valves, control cabinet

Year of construction: 1986, condition: used, PVPP filter for beer filtration. The system is sterilised by filling the dosing tank with hot water and flushing it with the PVPP tank in a circuit. Finally, the system is rinsed with cold water. After filtration, the PVPP is regenerated with lye. The system consists of the following components: - Stainless steel filter housing, 18.8 hl, upright, closed with clamping screws - Upright agitator tank for mixing PVPP with manhole on the top of the tank - Plate heat exchanger - Various pipes, pumps, valves, measurement technology - Control cabinet with user interface Additional title: beer filtration Filtration capacity appr.: 20000 l/h Gross volume filter housing: 1880 l Max. overpressure filter housing: 6 bar Operation / Control: VIPA 300S+ Cedpfoxzqursx Agrehd Material: Filter housing made of stainless steel 1.4541 (AISI 321) Features: Filter housing; mixing tank; plate heat exchanger; various pipes, pumps, valves and measuring technology; control cabinet

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Chsdpfezizq Tex Agred Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm Chodpfxehqhw Ij Agrsd H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: like new (used), functionality: fully functional, fuel type: electric, Year of construction: 2020, Used crushing and screening plant for sale, backed by the Fabo guarantee; fully maintained and ready for operation. Suitable for processing soft to medium-hard stone, with a high production capacity for sand-rich output. Csdps Ah E Evofx Agrohd Our plant consists of the following components: 30 m³ rock feed hopper PDK-140 primary impact crusher Cubitzer Impact crusher (secondary) 120-series tertiary crusher 2000x6000 mm vibrating screen 800x4000 mm conveyor belt 800x20000 mm conveyor belt 800x12000 mm conveyor belt 600x15000 mm conveyor belt 600x10000 mm conveyor belt 600x10000 mm conveyor belt

Condition: good (used), Year of construction: 2009, Section of Double-Stage Reverse Osmosis able to treat about 60 mc/g of product Cjdpfxetv Drle Agrohd

Year of construction: 2009, condition: good (used), Section of tubular ultrafiltration able to treat about 36 mc/g of product Chedpstv Dx Eefx Agrjd

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen Chsdpj Ahyatefx Agrod • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - Codpfjzfp Daox Agrehd - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors - *Weight : 31.000 kg - *The screen angle varies between 18-27°.

Year of construction: 2007, condition: used, functionality: fully functional, DANTHERM NFZ 3000 Dust Extraction / Filter Unit – 9,000 m³/h Reliable and high-capacity dust extraction (air filtration) unit for sale, suitable for woodworking, furniture manufacturing, and other industrial applications. Technical Specifications: Chodpfxezlgm Es Agred Filter area: approx. 150 m² Model: NFZ 3000 Year of manufacture: 2007 Collection bags: 6 pcs. Fans: 3 pcs. (3 sections) Airflow capacity: approx. 9,000 m³/h Inlet connection: Ø 630 mm Dimensions: Length: 3,600 mm Width: 2,400 mm (+ approx. 1,000 mm fan overhang) Height: 5,400 mm The unit is designed for efficient collection of dust and wood shavings and is suitable for a wide range of industrial production facilities. It features a robust construction and is easy to maintain. Condition: Used (fully operational) Price: Negotiable

Condition: used, color: other, Year of construction: 2017 Dimensions (LxBxH): 700 x 350 x 1850 cm Dimensions LxWxH: 7000x3500x18500mm AIR JET Industrial Dust Extraction & Bag Filtration System – 60,000 m³/h – Circa 2017 Key features: • Year: circa 2017, based on the technical documentation; exact manufacturing year to be confirmed from the nameplate. • Main filter: 806.4 m² filtration area with 448 bags; specified operating temperature of 100°C. • Secondary filter: 181 m² filtration area with 121 bags; specified operating temperature of 20°C. • Automatic compressed-air pulse-jet cleaning on both filters. • Teflon-treated filter media, as specified in the technical documentation. • Main filter features an AISI 304 stainless-steel clean-air chamber and tube sheet. • Steep 70° collection hoppers to assist dust discharge. • Technical and maintenance documentation available. A substantial industrial filtration installation offering two separate filtration capacities for process exhaust and dust extraction applications. Codpfx Ao Ahyh Nsgrjhd *The factory is still in production, with operations due to cease shortly. The site will be cleaned before collections begin. Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Codpfxezz Ax As Agrohd

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Chsdpfxey Hk Dao Agrjd

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1F12DOV1.4, COMAT X99 The Comat Superfiltration system is a professional plant for microfiltration of coolant and machining fluids, designed to operate in a closed-loop with CNC machines. Technical data Model: 1F12DQV1.4 Weight: 820 kg Power: 7.5 kW Year of manufacture: 2006 Fluid circuit capacity: minimum 800 liters, maximum 1,200 liters Overhauled by a Comat technician in 2020 What is this machine exactly used for? 1. Deep, real-time microfiltration: removes fine chips, sludge, and metallic particles from the oil and emulsions, with filtration that can reach 3 µm or even lower values. 2. Maintenance of coolant cleanliness and properties: helps to preserve the quality of the emulsion and reduce the risk of bacterial proliferation and deterioration of the machining oil. 3. Cooling and thermal stabilization: it is equipped with an integrated cooling system that helps prevent overheating of the oil or coolant. 4. Continuous operation in bypass and closed-loop: the system can be connected directly to grinding machines, filtering the fluid during the production process without having to stop the machines. 5. Simultaneous connection to up to 4 machines. Codpfxs Adl Tle Agrehd 6. Fluid circuit capacity: minimum 800 liters, maximum 1,200 liters. Benefits for your plant - Economic savings: significantly extends the life of the oil or emulsion, reducing the frequency of replacements and disposal costs. - Protection of tools and machines: clean coolant helps reduce wear on grinding wheels and grinding machine pumps. - Higher machining quality: reducing the micro-contaminant particles in the coolant helps improve the surface quality of the machined parts.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, Chsdpfozw Apgox Agrsd 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: Csdpfx Aeq Nyuvjgrehd - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: Chedpfsq Ngb Dex Agrjd - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, year of last overhaul: 2021, space requirement height: 8,000 mm, space requirement length: 37,000 mm, space requirement width: 35,000 mm, Equipment: documentation/manual, AUTOMATIC MOLDING AND GREEN SAND PREPARATION PLANT Plant manufactured in the 1990s by Italian Foundry Automation. Over the years, it has undergone continuous upgrades, including equipment overhauls, technological improvements and digitalization. The latest electrical system overhaul was completed in 2023. Machinery and safety systems have been continuously maintained and updated, with a focus on production quality, process control and compliance with applicable regulations. Technical Specifications: - Production capacity: 20 complete moulds/hour - Moulds in circulation: 90 - Pallets in circulation: 95 - Core-setting capacity: 6 lower mould halves + 5 upper mould halves - Minimum cooling time: 1.5 hours - Sand consumption: 70 t/h Main Components: - Speed Muller 100B mixer, with a production capacity of up to 120 t/h. - GRF 12-750 fluidized bed cooler, equipped with temperature and humidity sensors. - JOST TWFE 1600 × 8000 continuous vibrating shake-out unit. - Adiabatic shock-wave moulding machine. - DISA in-line control system for continuous process adjustments. - Sand handling system, including belt conveyors (Approx. 280 m), storage silos Cjdpfx Agez Rna Norshd The plant can be inspected on site by interested parties, subject to prior appointment and mutual agreement.

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. Cedpfxjy Au Are Agrehd *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 999 kW (1,358.26 HP), input voltage: 400 V, type of cooling: water, warranty duration: 6 months, input frequency: 50 Hz, Equipment: documentation/manual, We are pleased to offer for sale a brand-new Jenbacher J320 D05 Combined Heat and Power (CHP) unit, featuring an electrical output of 999 kWe. The equipment is brand new, has never been commissioned or operated, and has zero operating hours. 1. Technical Specifications Manufacturer: Jenbacher Engine Model: J320 D05 Equipment Type: Combined Heat and Power (CHP) Unit Electrical Output: 999 kWe Fuel Type: Natural Gas Condition: Brand New – Never Operated Operating Hours: 0 Hours Availability: Immediately Available Location: Greece 2. Available Configurations Cheds Ahwibopfx Agrsd Option 1 – Standard CHP Unit | Immediate Availability The brand-new Jenbacher J320 D05 CHP unit is available in its standard configuration and ready for immediate delivery. Option 2 – Containerized CHP Solution | Optional Upon request, the CHP equipment can also be supplied and installed in a specially designed containerized solution. This configuration offers a comprehensive, project-specific solution tailored to the customer's technical, operational, and installation requirements.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Carlson Filtration Type FZ164 Filter Housing Chsdpfxsyq Ryhe Agred P/N: 5052164040 Diameter: 16"x4 Volume: 191L Year: 2015 Pressure PS: 0-8 Test Pressure: 11.5Bar Fluid Group: 1 and 2 316L 4 pieces available Carlson housings modified for Pall SUPRAPak modules. Parts are still there to return to original set up

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, At FABO, we design and install stationary type stone crushing and screening plants tailored to meet our customers’ specific requirements. The production capacity of our stationary plants varies between 100 and 1000 tons per hour. Crushing & Screening Plant with 250–350 TPH Capacity: • TBX-35 / Vibrating Feeder Bunker – 1 unit • TE-1430 / Intermediate Screen (1400x3000 mm – 2 decks) – 1 unit • PDK-130 / Primary Impact Crusher – 1 unit • TE-2060 / Washing Screen (2000x6000 mm – 3 decks) – 1 unit • TK-100 / Tertiary Crusher – 1 unit • TE-2060 / Vibrating Screen (2000x6000 mm – 3 decks) – 1 unit Chsdpfeyzxctox Agrjd • Hydraulic Unit for TK-100 • Hydraulic Unit for PDK-130 • Conveyor Belt System (widths: 1000 mm, 800 mm, 650 mm) • Control Cabin, Electrical Panel, Control Panel, and Automation System All our products are manufactured with great care and come with a 1-year warranty. Installation and Operator Training are FREE of charge! FOR MORE INFORMATION, PLEASE CONTACT US!

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Chodoz E Rv Uspfx Agred Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel