Single-side Edge bander - RIGHT SIDE

BRANDT (HOMAG Group) EdgeTeq S-300 (KDF 440 C)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Pjdpfx Apeytp Hrodorc

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Predpfx Aezx Ennepdec Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: 0.3 – 15 mm -CM – CombiMelt gluing system Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Sale of the machine with warranty possible. Podpfx Apezkk Dredjrc Inspection and demonstration possible at any time by appointment.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim Predpfezb N T Uox Apdsc

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding Predpettakhofx Apdsc max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Psdpfx Ajzku Rpopdjrc In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min Prjdpfxox Ebzdj Apdsc

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) Pjdpfji Hn Srsx Apdjrc No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, Year of construction: 2021, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it. Prodpoz D U A Aefx Apdec

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW Podpszuy N Eefx Apdsrc - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.