Used Plastic Baler for sale (6,481)

Condition: used, functionality: unexamined, Used mobile plastic storage box. Three layers and a lid. With brake. Adjustable handle/bar for storage and transport. Dimensions: 123/93cm x 85cm x 114cm (LxWxH). Price per unit. Dodpfjxmhacsx Ab Tecr

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Djdpfx Aoxl Rqbsb Tecr Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Year of construction: 2021, operating hours: 200 h, condition: like new (used), Amos Belt Press OPUS 1200 including fruit washer Amos ELE 280 N. The entire system is made of stainless steel, including the electrical control cabinet. Few operating hours. The unit is being sold due to the acquisition of a larger press system. Dsdpfxewimqzs Ab Tjcr

Year of construction: 2012, condition: good (used), Colortronic Dry-Flex M400 Granule Dryer For sale is a used Dry-Flex M400 granule dryer from Colortronic. Dsdpfx Aexlqztsb Tjcr Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (Germany) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating power: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granule dryer / plastic dryer Area of ​​application: Plastics processing, injection molding, extrusion Condition: Used, functional Buy Colortronic Dry-Flex M400 granule dryers and other items at a great price – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems Dcodpfswm Nq Eox Ab Ter • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: used, Year of construction: 2006, operating hours: 54,050 h, pressing force: 80 t, filling opening width: 1,020 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,100 l, power: 94 kW (127.80 HP), empty load weight: 21,000 kg, Technical data baler: Manufacturer Paal Typ Konti 275 E Year of construction 2006 Hours of operation in total 54,050 hours Press power main press 80 tons at 300 bar Specific press capacity 9,7 kg/cm² Feed channel 1,600 x 1.020 mm (l x w) Throughput capacity under operating conditions 350 m³/hour Bale size 750 x 1,100 mm, length variable Driving motor 75 kW Connected load 94 kW Rated current 180 A Tying system 4-fold vertical, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 2,100 l SPS controller (manuf., type) Siemens Simatic S7-300 Operating panel (manuf., type) Siemens Multi Panel Dsdoxcxm Espfx Ab Tecr Transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h) Machine weight baler approx. 21 tons Condition of the baler: The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are not currently available. The plant is currently still in operation and is to be replaced by a larger press plant in the coming months. Scope of delivery: Bale press, bale chute, conveyor belt and machine documentation. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock at our Leingarten facility! Whether copper recycling or plastic recycling, you can source all machines from us. Don't hesitate to ask. ‼️Immediately available for pickup ‼️ In stock ‼️ ‼️Watch videos on our website ‼️ Two-shaft shredder 80 cm shaft width 2 motors with 18.5 kW each Very powerful shredder for tires, steel, wood, cables, plastics, etc. – universal shredder. Robust, durable – Quality checked by Josan. Available from our stock. Net price: €33,000 Djdpfxjp E Egps Ab Tjcr Errors excepted. Images/price may vary.

Condition: good (used), Manufacturer: Comp Tip: SB5 Engine: 2,2 KW Cylinder stroke length: 500 mm Dedoh Eic Ajpfx Ab Tocr Chamber size: 500 x 350 x 400 mm

Condition: reconditioned (used), Year of construction: 2008, operating hours: 23,000 h, machine/vehicle number: 00834, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,315 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 30 kW (40.79 HP), year of last overhaul: 2025, Equipment: documentation/manual, Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler, hereby offers the following machine(s) A repaired HBC60 (30kw) Repaired – in very good technical condition Year of construction: 2008 Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Dedpfoxck U Usx Ab Tecr Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW Following repairs have been done in our official Bollegraaf OEM Refurbishment Workshop: * Safety doors needle installation replaced with new * Ram wheels behind replaced with new * Bronze strip above ram replaced with new * Movable beam position switch ram replaced with new * Scraper above ram replaced with new * Sealing pre press cylinders replaced with new * New steel beams channel cylinder * nieuwe buisjes oplassen en wielen gangbaar maken * New pusher cylinder underneath vertical tying unit * Safety hatch behind needle installation replaced with new * Several cables and asi modules replaced with new * New air filter * New oil filters

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. Dcjdpfx Aevq Rtkjb Tjr The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Dcjdpfx Abon D Hczs Tjr Cup height: 120-130 mm

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Dsdpfx Absxcngne Tjcr Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2023, condition: new, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Djdpfx Aboqvmn Ns Tecr Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary.

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Dodpohzr U Iefx Ab Tocr Housing size: 3500 x 1000 x 2200 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, color: green, overall weight: 36 kg, maximum load weight: 450 kg, machine/vehicle number: 1, We sell used plastic BIG BOXES for fruit and vegetables in very good condition real photo dimensions 1200x1000x785 mm own weight 36 kg 4 x legs current number for sale 1,000 pieces EXW Nové Mesto nad Váhom/Slovakia Dcodsvza N Nspfx Ab Ter

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Djdpoukxwmofx Ab Tjcr Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Condition: ready for operation (used), Shredder for plastic 45kw power , can chop foil and other plastic into small chunks. Dsdpfx Abjxf Txze Tecr The shredder has also soft start box.

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Djdpfexbgnhox Ab Tjcr Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Dcsdpfjqvmpfjx Ab Tor Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Dcodeu Ti Tvjpfx Ab Tjr Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 270 kg, warranty duration: 24 months, empty load weight: 265 kg, Robust and compact construction High-quality components with a longer lifespan Above-standard productivity Adjustable bale height (three sizes) Automatic start for efficient compaction Bale trolley for easy transport Material selector for cardboard and plastic Full bale indicator and service indicator Compliance with EN 16500:2014 safety standards Dsdpfxeu Tqmdo Ab Tjcr

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Dcjdpfx Aoxd D Nzjb Ter

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Dcjdpfsvaw T Aox Ab Tjr

Condition: used, Used bucket elevator with plastic buckets from Apollo High capacity (15 t/h) Lifting height = 6.66 m Gentle product handling Some buckets only 3 years old! Dsdpfx Abexd U Ego Tecr Bucket width = 750 mm Hydraulic chain tensioning

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Djdpfxsxd D I Re Ab Tscr