Used Plastic Baler for sale (6,297)

Condition: used, Year of construction: 1994, pressing force: 40 t, power: 22 kW (29.91 HP), We sell/rent the BAUER 300 baler. Iiodpjw S Hpbjfx Afioh Technical specifications: Secondary raw material baler installation Manufacturer: BAUER Model: 300 Year of manufacture: 1994 Power: 22 kW Pressing force: 40–50 t Dimensions (L x W x H): 10,300 x 2,000 x 3,000 mm Tipping weight: approx. 400 kg PRICE ON REQUEST!

Condition: used, Year of construction: 1998, Colmar car baler Iedpow Svw Ujfx Afisih

Condition: like new (used), functionality: fully functional, AMIA calendar press, 50 cm working width, with entry photocell for automatic operation, pneumatic drive. Isdpfx Aow Ski Eofisih

Condition: used, Used plastic tank Article number: 10856 Last application: Chemical Volume: approx. 2300 L Type: Vertical Material (media-contact): Plastic Design: Single-wall Operating pressure according to nameplate: ATM Tank dimensions: External diameter: 1550 mm Internal diameter: 1500 mm Cylindrical height: 1260 mm Total height: 1700 mm Total width: 1870 mm Iijdpfx Afow Skileieh Features: Nameplate: no Heating coil defective

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Ijdpfxew Hz T Ee Afijih

Condition: used, Year of construction: 1996, functionality: fully functional, Baler Presona LP 80 DH2, Year of Manufacture: 1996 Technical Data: Manufacturer: Presona, Sweden Model: LP 80 DH 2 Year of Manufacture: 1996 Drive Power: 2 x 45 kW Filling Opening: 1500 x 1100 mm Pre-press Force: 28 t Isdpow Hqynofx Afioih Main Press Force: 80 t Throughput Capacity: 9-25 t/h Bale Size: 1100 x 750 mm, variable length Bale Weight: approx. 450–600 kg Tying: 5-fold vertical, automatic Dimensions: 10200 x 2400 x 2700 mm (LxWxH) Machine Weight: approx. 28 t The baler is still in operation and is expected to be dismantled in mid-September 2025. Viewing by appointment only. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the details given or potential errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by prior arrangement. Sale is ex works and subject to advance payment, without warranty or guarantee.

Condition: defective spare-parts repository (used), Year of construction: 1992, pressing force: 30 t, power: 15 kW (20.39 HP), CHEAP SALE BALER WITH DEFECT! Technical data: Manufacturer: Homa Type: BP3000P Year of manufacture: 1992 Filling opening: 1050 x 820 mm (LxW) Drive power: 15 kW Pressing force: 30 t Settings: horizontal, fully automatic Bale size: 800 x 900 mm Bale weight: approx. 300 kg Machine weight: approx. 5,650 kg Iijdpfxew S E T Sj Afioh Defect – Oil has leaked from the system, water may have entered the system! PRICE 5,500 EUR (EXW Lithuania, Vilnius)

Condition: excellent (used), Year of construction: 2017, Robopac Rotoplat 708 PDS This is your opportunity to acquire a used Robopac Rotoplat 708 PDS, an advanced semi-automatic stretch wrapping machine from 2017 – ideal for businesses seeking efficient and reliable palletizing equipment. Iiodpew R Ad Sofx Afijh The machine offers: PVS film carriage with dual motors and adjustable film stretch between 150–400%, directly set from the control panel. Cube Technology™ for optimized film usage and load stability – save up to 55% film. Automatic height detection via photocell and patented S-threading for easy film loading. 7” color touchscreen with intuitive interface and Multilevel Control – allowing you to save and switch between 6 different load programs. R-Connect (may require new data connection) for remote monitoring, settings adjustment, and performance analysis. Manufacturer: Robopac Length: 2,750 mm Width: 1,650 mm Turntable diameter: 1,650 mm Height: 2,800 mm Max pallet height: 2,600 mm Max load: 2,000 kg Capacity: Up to 40 pallets/hour Available for immediate delivery. Shipping not included.

Year of construction: 2018, condition: ready for operation (used), Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible. Isdpewqqwhefx Afioih

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Baler Orwak Compactor 3150 Very good condition Ijdpfxsw Rn U No Afisih

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Iiedet H Rcaepfx Afish Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Manufacturer: COSMO Model: ST-99 Bag size: - length: 350 - 650 mm - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Power supply: 230 V, 3 phases, 50/60 Hz Iiodpfx Aerww E Isfioh Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, pressing force: 50 t, overall weight: 17,000 kg, empty load weight: 17,000 kg, Technical Data: Avermann Maschinenfabrik GmbH & Co. KG Model: AVOS 1410 BS-22/50 Year of Manufacture: 2000 Pump operating hours: 25,000 hours Feeding channel dimensions: 1,400 x 1,000 mm Bale dimensions: 1,100 x 750 mm (width x height), length adjustable. Drive power: 22 kW Own weight: 17 t Capacity: 5.5 t/h Bale weights: up to 500 kg depending on material. Vertical, 4-fold tying, fully automatic PLC control: Siemens S7-1500 Assembled baler dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Special Equipment: Wear-resistant floor made from HARDOX steel The conveyor belt is not included with the machine. Documentation: Operating manual is available in full. Inspection possible by prior arrangement. No liability is assumed for technical data or potential errors. Condition of the press: Iijdow N Hlqspfx Afijh Operational and ready for use, thanks to regular servicing. It has only been used for baling paper. Avermann baler, model AVOS 1410 BS-22/50, including wire tying stations and bale slide.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 17137, CNC machine with 0 operating hours. Iisdpfxew H N Nzj Afieh

Condition: ready for operation (used), A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading. Iijdpfxow I E Dij Afijh

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation. Ijdpfovyumyox Afioih

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, bale width: 100 mm, bale height: 800 mm, bale weight: 400 kg, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Iijdpfx Afot H Rgfjieh Operating hours 18,819 hours Number of bales pressed 7,019 pieces Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Iisdpfx Afewav Hmjieh Type: R100/75/V Engine Power: 75 kW Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used

Condition: used, Year of construction: 1995, functionality: fully functional, input voltage: 400 V, power: 40 kW (54.38 HP), Baler from 1995. Viewing by appointment only. Iodpfx Ajw H Ar Aefieih

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, For sale: Vertical baler Dixi 60S Year of manufacture 2018 tested, serviced and fully functional Several machines are available. Year of construction 2010-2019 Hydraulic door closer/opener Tying with wire Automatic opening of the filler flap Automatic pressing when closing the filler flap Hydraulic bale ejector Overall height 217cm = no assembly required when setting up Technical data Motor: 7.5 kW Supply voltage: 400/50 V/Hz Pressing force: max. 600 kN Iodpfxeq Tb Azs Afijih Cycle time: 36 s Pressing time: 16 s Filling opening W x H: 116 x 55 cm Height from floor: 118 cm Bale ejected W x H x D: approx. 120 x 80 x 110 cm Bale weight*: max. 340 - 500 kg Dimensions W x D x H: 189 x 140 x 217 cm Weight: 2430 kg Commercial offer - sale only to traders Offer prices are net prices Invoice + VAT We will gladly prepare an offer incl. delivery

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Iodjvwlqqspfx Afieih Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2015, operating hours: 97 h, functionality: fully functional, pressing force: 10 t, Fully serviced, fully equipped and ready to use. New oil. 5 units in stock. Ijdpfx Afew Ey Dtoieih

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, pressing force: 60 t, filling opening width: 1,150 mm, filling opening length: 735 mm, bale width: 1,200 mm, bale height: 1,200 mm, bale weight: 550 kg, total width: 2,000 mm, total height: 2,880 mm, total length: 1,900 mm, overall weight: 3,575 kg, transport height: 1,970 mm, power: 7.5 kW (10.20 HP), year of last overhaul: 2023, volume flow: 116 m³/h, transport width: 2,000 mm, transport length: 1,900 mm, How do you do? We hereby offer you, without obligation, a used, vertical baling press, from the manufacturer HSM, type VL 600, with 60t pressing force, year of manufacture 03/2004. The machine was used in a small logistics center for baling paper, cardboard and film and was only in operation for a few hours per week. The machine has been partially overhauled and tested. The machine documentation is available in German. A viewing of the press is possible by appointment. We would be pleased if this machine is of interest to you. Iijdpjuaxv Tjfx Afijh Your service team Mertens & Frowein GmbH

Condition: used, 🧰 Product Features • Material: High-quality polypropylene (PP) Isdsw Euv Ropfx Afisih • Color: yellow • Condition: used, see photos • External dimensions: 400 × 300 × 148 mm • Internal dimensions: 346 × 265 × 144 mm • Volume: 10.1 liters • Load capacity: 20 kg • Weight: 1.29 kg • Stackable: Yes 💰 Price: €3 net, excluding VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Always over 5,000 linear meters of pallet racking from various manufacturers in stock (Technical data, details and prices subject to change and error; intermediate sale reserved! See our terms and conditions, all prices ex-warehouse exclude VAT.)

Condition: like new (used), 🧰 Product Features • Material: High-quality polypropylene (PP) • Color: grey • Condition: used, very good • External dimensions: 600 × 400 × 120 mm • Internal dimensions: 555 × 355 × 115 mm • Load capacity: 20 kg • Volume: 23.3 liters • Temperature resistance: -20°C to +80°C • Weight: 0.94 kg • Container perfectly suited to Euro dimensions • Stackable: Yes 💰 Price €4.9 net excl. VAT Ijdpfx Asw Elqrjfisih • Bulk discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement Over 5,000 linear meters of pallet racking from various manufacturers constantly in stock (Specifications, details and prices subject to change and prior sale. See our Terms & Conditions; all prices excl. VAT ex works.)