Used Pharmaceutical for sale (1,749)

Condition: used, KMA Heat Exchanger and Pumping Station Gbodpfsym Dx Asx Af Usi

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank Gbodshg Nk Djpfx Af Uoi

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Gbjdpfxehg Niqj Af Usi Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Tank diameter: 2100mm heatable/coolable double jacket Gbodpfx Afohg Nlpe Uji

Condition: used, Używany mieszalnik dwuwałowy łopatowy produkcji Alco Food Machines (DE) model AMP 300-S o całkowitej pojemności komory 330 l. Pojemność robocza ok. 230 l. Komora mieszania ma wymiary wewnętrzne D 900 mm x S 805 mm x G 535 mm. Góra otwarta. Mieszalnik posiada dwa wały mieszające, każdy napędzany przez przekładnię silnikiem elektrycznym o mocy 0,9/1,5 kW, 705/1415 obr/min, 380/400V, 50 Hz. Każdy wał jest wyposażony w dwie pół-wstęgi i siedem łopat. Rozładunek przez dwa otwory rozładunkowe w ścianie frontowej, każdy wyposażony w klapę ze stali ko, sterowaną pneumatycznie. Maszyna jest zamontowana na czterech nogach ze stali ko i posiada lokalny panel sterowania. Ostatnio pracowała w przemyśle spożywczym. Gedpfxsykpaas Af Usbi

Condition: used, Used dissolver by Drais (DE) model RN 3-45 AS VAC. Contact parts designed in carbon steel. Machine is designed for work on vacuum. Mixer has single shaft with working length 105 cm and toothed disc with diameter 690 mm. Shaft is driven by el motor 45 kW, 1460 rpm, 400/690 V, 50 Hz. Working rotation of shaft up to 600 rpm. Mixer has also side wall scrapper, driven by el motor 1.5 kW, 1410 rpm, 440 V, 50 Hz and gearbox. Working rotation of scrapper up to 26 rpm. Machine has top cover and mixing pan with total volume 2000 l. Mixing pan has internal diameter 1465 mm x length of straight side of wall 1160 mm. Mixing pan has two side wall discharge outlets with valves, and bottom supports for work with forklift. Dissolver is rised/lowered hydraulically. Rise up to 145 cm. Hydraulic pack is driven by el. motor 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Mixer is equipped with vacuum pump by Tepro (PL) and local control panel. Last time used in chemical industry. Gbodpfxjykn U Ne Af Uei

Condition: used, Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped with stainless steel electric control panel. Technical documentation included. Specifications: Bowl Volume: 448.6 gal Motor Power: 73.8 hp Material Of Construction: Carbon Steel HP Of Unit: 73.76 Revolutions Per Minute: 20.39 Vacuum Internal (Y/N): No Jacket (Y/N): Yes Gsdpoykn U Aofx Af Ujbi Jacket Pressure: 0.5 Jacket Temperature: 5-40

Condition: used, Used Fryma Koruma model VME-120/C stainless steel vacuum process vessel. - Manufacturer: Fryma Koruma - Model: VME-120/C Vessel: - Capacity of vessel: 25 - 120 litre - Vessel rated: -1 bar at 150°C - Capacity of jacket: 25 litre - Jacket rated: 3 bar at 150°C Mixers: - scraping-mixing system: speed 17/34 rpm driven by 2.0/2.4 kW motor - homogenizer system with diameter 230 mm: speed 300 - 1450 rpm, driven by 15 kW motor Includes: - vacuum pump - control panel - hydraulic agregate for lifting mixing units Specifications: Gbjdpfx Ajykpdfsf Uoi Power: 19 kW Vacuum (Y/N): Y Capacity: 120 Jacket (Y/N): Y

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Gjdpjykn T Ssfx Af Ujbi Specifications: Capacity: 550 ft³ Dimensions: 44.8819 x 32.0866 x 39.9606

Condition: used, This listing is for a Thermo Scientific TSX40086V Ultra Low Temp Freezer. The unit is in full working condition and is ready for immediate release. This unit is supplied with temperature sensors The Thermo Scientific TSX40086V is an ultra-low temperature freezer designed to provide reliable, sustainable, and energy-efficient storage for laboratory samples. With advanced technology and robust security features, it ensures the safety and preservation of valuable materials. Key Features: Capacity and Dimensions: Storage Capacity: Holds up to 400 2-inch boxes, offering ample storage for a variety of sample types. Compact Design: Exterior dimensions of 37.6 × 28.3 × 78 inches, making it suitable for diverse laboratory spaces. Temperature Range and Performance: Temperature Range: Maintains ultra-low temperatures from -50°C to -86°C, ensuring optimal sample preservation. Temperature Stability: Less than 5°C variation throughout the cabinet space for consistent storage conditions. Warm-Up Time: Long warm-up time from -50°C to -80°C (approximately 5.05 hours), ensuring extended protection during power interruptions. Energy Efficiency and Sustainability: Energy Star Certified: Reduces energy consumption without compromising performance, saving on operational costs. V-Drive Technology: Adjusts to user patterns to optimize energy use and reduce HVAC demands. Eco-Friendly Construction: Manufactured in a zero-waste facility with natural refrigerants and water-blown foam insulation. Compliant with U.S. EPA SNAP and EU F-Gas regulations. Connectivity and Monitoring: DeviceLink Technology: Enables real-time monitoring of system status and sample temperature via mobile and web applications for convenience and peace of mind. Safety and Security: Advanced Security Features: Includes alarm settings, padlock-compatible doors, and optional access card entry for enhanced protection. Benefits: Sustainability: Manufactured with environmentally responsible practices and materials, making it a sustainable choice for labs aiming to reduce their carbon footprint. Energy Savings: V-Drive Technology and ENERGY STAR certification significantly reduce operational costs by optimizing energy consumption. Sample Protection: Long warm-up time and consistent temperature stability protect valuable samples even during power outages or fluctuations. Gjdjxxycmepfx Af Uebi Convenient Monitoring: Remote monitoring through Device Link ensures that system status and temperature can be checked anytime, anywhere. Flexible Storage: Accommodates a wide range of sample types with its large capacity and uniform temperature distribution. Applications: The Thermo Scientific TSX40086V is ideal for laboratories requiring dependable ultra-low temperature storage for critical materials, such as: Biomedical Research: Long-term storage of biological samples, DNA, RNA, and proteins. Clinical Laboratories: Preservation of vaccines, plasma, and other temperature-sensitive specimens. Pharmaceuticals: Storage of compounds, drugs, and reagents. Industrial Research: Safe storage of raw materials and chemicals.

Condition: used, Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 50 Litre Capacity Mixing Trough: Approximately 540mm x 320mm x 400mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 2.3 kW Also includes: Local controls, stainless steel hinged lid with clamps and perspex cover and stainless steel mobile frame. Click on the link below to see a video of the machine running. Specifications: Capacity: 1.8 ft³ Gsdpfx Asykn Uief Ujbi Material of construction: 316 Stainless Steel Horsepower: 3.1 hp Dimensions: 21.26 x 12.60 x 15.75

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Godpfjykn T Eox Af Uobi Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Comprehensively tested and refurbished, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Gbjdpfsykn Tlox Af Uji Material: Stainless steel Capacity: 750 litre Mixing trough: 1000mm wide x 1500mm long Discharge Type: pneumatically operated twin bomb door discharge Type Of Blades: Twin shaft paddles Motor: 15 kw 415 volt 3/50 motor Also includes: Mild steel frame A video of this mixer is available below.

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Gbedpfxoykn S Ue Af Uoi Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has domed hood/lid with clamps. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Gsdpfjykn Tfsx Af Usbi

Condition: used, Comprehensively tested and refurbished used Morton-Lödige model FKM800 304 stainless steel ploughshare mixer. Manufacturer: Morton Material: Stainless steel (304) Capacity: 240-560 litre working capacity. 800 litre total capacity (product dependent) Mixing Chamber: 1,800mm straight side x 760mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Gsdpfx Afjykn Sue Uobi Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 15kW Motor with Gearbox Also Includes: 2 Stainless Steel Side Entry Choppers Direct Driven by 4kW Motors. Click on the link below to see a video of the machine running. Dimensions: 1,800mm straight side x 760mm diameter

Condition: used, Comprehensively tested, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Manufacturer: Lodige Material: Stainless steel Capacity: 300 litre working capacity. 600 litre total capacity (product dependent) Mixing trough: 630 mm diameter X 2000 mm long Discharge Type: electrically driven Weir plate discharge direct driven by motor and gearbox Type Of Blades: Stainless steel ploughshare blades Motor: 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox. Also includes: carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C - (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 volt 3/50 3000 rpm motors - (2) side inspection doors. - mounted on mild steel support frame with (4) wheels. - Throughput performance approximately 18 cubic meter/hour with 1 minute residence time. A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 15 hp Material Of Construction: Stainless Steel Choppers (Y/N): Yes Gbjdpfx Afoykn Sne Uei Number Of Choppers (1-10): 3 Horsepower Of Choppers: 5.5 RPM Of Choppers: 3000 HP Of Unit: 15 Revolutions Per Minute: 1500 Jacket (Y/N): Yes Jacket Pressure: 5 Jacket Temperature: 158

Condition: used, Kompleksowo przetestowany, używany mieszalnik lemieszowy produkcji Winkworth (Anglia) model RT400 wykonany ze stali kwasoodpornej AISI 316. Materiał: stal kwasoodpornej AISI 316 Pojemność robocza: 400 litrów (w zależności od produktu) Wymiary komory mieszającej: długość 1300 mm x średnica 800 mm Typ rozładunku: zawór klapowy pneumatyczny, umieszczony centralnie na spodzie Gbodpfx Afeykn Sho Uoi Mieszadło: szybkoobrotowy wał z przyspawanymi łopatami w kształcie "T" Silnik: napęd produkcji SEW z silnikiem elektrycznym o mocy 22 kW Dodatkowe wyposażenie: - 1 boczne mieszadło intensywne (chopper - Refiner) napędzane bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, możliwość podłączenia drugiego mieszadła Poniżej dostępny jest link do filmu ukazujący mieszalnik podczas testowego uruchomienia: Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Godpfx Afjykn Sbs Usbi Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted).

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Specifications: Capacity: 105 gal Type of stainless: 316 Internal Pressure: 3.5 PSI Internal Temperature: 212°F Jacket Pressure: 95.8 PSI Diameter: 29.528" Straight Side: 37.402" Gsdpjykn Rwefx Af Usbi Type Of Heads: bolted dished top, welded dished bottom Legs/Lugs: side support

Condition: used, Used BCD approximately 1,000 litre capacity super duplex 2507 stainless steel vertical reactor. Unit measures approximately 1,450mm tan to tan x 920mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at -10 to 180 deg.c. External 316L stainless steel jacket rated 10 bar / full vacuum design pressure at -10 to 180 deg.c. Unit has bottom entry stirrer with mag drive. Unit mounted on (3) stainless steel legs. Specifications: Capacity: 264.2 gal Gbedpfx Afoykn Rqs Uei Type of stainless: super duplex 2507 Internal Pressure: 3 PSI Internal Temperature: 180°F Jacket Pressure: 145 PSI Diameter: 36.22" Straight Side: 57.087" Type Of Heads: welded dished top and bottom Legs/Lugs: 3 Dimensions: 57.0866 in x 36.2205 in

Condition: used, Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 3kW 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Specifications: Gjdpfx Ajykn Rkjf Usbi Capacity: 241 gal Type of stainless: 316L Internal Pressure: 6 PSI Internal Temperature: 180°F Jacket Pressure: 87 PSI Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: Side Supports

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Godpjykn Rdsfx Af Ujbi Specifications: Capacity: 1,320.9 gal Internal pressure: 96 PSI Jacket Pressure: 95.9753 Material of Construction: Glass lined steel

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Gbjdpjykn Ipsfx Af Uji

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a fully procured, modular GMP process system for the production of C1-Esterase Inhibitor (C1-INH) from human plasma. The plant was professionally engineered, procured, and has successfully completed FAT, but has never been installed or put into operation. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: brand new, in original packaging Operating hours: 0 Storage: temperature-controlled warehouse SCOPE OF SUPPLY (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): - 2 adsorption lines (DEAE / QAE) - 2 buffer tanks - 2 pigging systems - 2 cooled transfer lines (pipe-in-pipe) - 4 filter press racks - 4 cooling cascades - 4 CIP loops Precipitation PRE: - 3 pre-precipitation tanks (incl. 1,000 L) - 3 main precipitation tanks - 3 CIP stations - 3 multi-layer filters - 1 vacuum station Buffer Preparation (Bay 2 & 3): - 6 buffer vessels (NaCl, DEAE, QAE buffer) - 6 temperature control skids - 4 media/WFI/CIP distribution units LEP 2.3 – Washing & Elution Solutions: - 2 washing solution tanks (up to 9,000 L) - 2 elution solution tanks - 4 temperature control units LEP 13 – Ammonium Sulfate System: - 1 preparation tank (3,500 L) - 2 storage/distribution tanks - Solid material crusher - Dosing & neutralization system - Heat-traced pipes Media Distribution: - 1 pharmaceutical NaOH 1M system - 1 technical NaOH 32% system - 1 acetic acid 60% system - Pump and dosing stations Additional Process Tanks: - >15 stainless steel tanks 316L (1,000–9,000 L) - Various skids, distribution and instrumentation units GMP & DOCUMENTATION - URS / requirement specifications per LEP - P&ID diagrams - Layout and sectional drawings - EMSR & instrumentation documentation - FAT documentation - Complete weld certification (digital) - Extensive photo documentation Gedpfjym Ayfsx Af Uobi The project documentation is fully available both digitally and additionally physically archived, structured in 316 folders. Process control system connection with pre-configured MES interface is foreseen. Cleanroom integration according to specification. SALE Preferably as a complete system. Modular sale possible if the entire package is not sold. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or new site establishment projects. Availability: short notice Inspection: by appointment Price: on request