Used Paper Cutter Guillotine for sale (5,799)

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld Nkjdpfjyuw S Ejx Ahvjw

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device Nodpfxst Ac D Uj Ahvokw - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: excellent (used), Year of construction: 2007, Technical specifications: Nkjdpeywd Ndjfx Ahvjw Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 1997, Geka ETS 300 Year of manufacture: 1997 Capacity: 3000x1.5mm for St37 Left-hand sheet stop Manual rear gauge up to 700mm 380 Volt Foot switch Nsdpfoywdzmsx Ahvskw Dimensions approx. (in mm): 3650x2000x1400 Weight approx. 2200kg

Condition: good (used), Nagel Citoborma 111 Paper Drill This machine is 100% functional and in very good condition. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. Nkodpfx Ahsyur E Hsvsw 230V power supply Drill bit diameter: 2-9 mm Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany.

Condition: good (used), Muro 1002 Paper Jogger Description: The jogger is designed for aligning collected sets of forms, brochures, and printing sheets. Nsdpjyur Dpefx Ahvskw The motor speed is adjustable. The jogging cassette tilt angle is 45°. Technical specifications: Format: 43 x 43 cm Stack height: 10 cm External dimensions: 60 x 60 cm Power supply: 230 V Weight: 40 kg

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Nksdpfx Asyur Diehvew Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Kolbus KS Cloth cutter Made in Germany. The shears are operational and ready for production. The robust construction ensures rigidity and consistent cutting. Cutting width: 1400mm Ideal for canvas, faux leather, synthetic veneer, PVC, etc. 11 sets of longitudinal knives. Roller stand with brake. Outfeed table Tools and documentation included. Nkodpfxoyur Dco Ahvsw

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, cutting width (max.): 155 mm, Equipment: documentation/manual, Complete cutting line consisting of: Polar 155 ED with an additional knife, Polar stack unloader TR ER-100-6, Polar lift LW 1000-6, Polar jogger RAB 7. Nksdexxn Azspfx Ahvew

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, back gauge: 500 mm, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Nkodpfx Ahewy Nhqevjw Front safety laser.

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Nksdoxgdlnopfx Ahvow Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, input frequency: 50 Hz, type of input current: three-phase, Universal mixer Fortschritt Universal machine Mixer type 15 Bowl capacity approx. 15 liters with 180° tilting function Only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine Nodpfxoyunk Ee Ahvekw We have more machines in stock!

Condition: new, Year of construction: 2026, Kilia Kutter Vacuum 30 6000 Vario Knife speeds Mixing/Cutting (RPM): 500 to 5100, variable Knife speed (m/s): 80 Stepless knife drive Stepless bowl drive Vacuum lid hydraulic Nsdpfxoyv Uwco Ahvskw Time/rounds cut-off Temperature cut-off Central lubrication Remote control Bowl volume L/kg: 30 L / 21 kg Bowl rotations RPM: 7 to 20, variable Touch and manual control Electric knife cover drive: optional Cooking/cooling device: optional Recipe manager KPV: optional Customer-side pre-fuse: 25 A gG/C Rated connected load: 15 kW

Condition: refurbished (used), Krämer + Grebe 200L cutter The machine is completely overhauled by us. All wear parts have been replaced on the machine. The electrics on the machine is new! Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information contained and prices are not guaranteed. A warranty and / or liability is excluded. Nsdpfjp Aub Ijx Ahvskw Until full payment, the machine remains our property.

Condition: good (used), functionality: fully functional, Year of construction: 2008, working width: 3,080 mm, sheet thickness (max.): 13 mm, Equipment: emergency stop, finger protection, foot remote control, For sale: Durma VS 3013 hydraulic guillotine shear, lightly used, single owner, manufactured/purchased in 2008 (supplied by Vendo Kft.). The machine is in very good technical condition and has been regularly maintained. Key Specifications: Cutting length: 3080 mm Maximum sheet thickness: 13 mm (steel), approx. 10 mm (stainless steel) Drive system: Hydraulic Back gauge: Motorized Hold-down system: Hydraulic clamps Nksdpfxsx Taras Ahvow Frame: Heavy-duty welded steel construction Machine weight: 12,900 kg Condition: Very good Location: Tatabánya, Hungary Price: EUR 21,500 net The machine can be inspected and tested at our facility in Tatabánya, Hungary.

Condition: good (used), functionality: fully functional, Hydraulic Guillotine Shear SAGITA Working width: 2500 mm Shearing capacity: 5 mm Electric back gauge Foot pedal, machine feet Condition: Good, blades OK, cuts cleanly. Nedpfx Asyv Ikcohvekw Can be inspected under power. Loaded free of charge from D -88433 Schemmerhofen.

Condition: excellent (used), functionality: fully functional, sheet thickness steel (max.): 8 mm, back gauge adjustment: motor-driven, IMAL SHEAR 3000 X 6/8 HYDRAULIC MODEL CC0.30/6 MAX THICKNESS R 42: 8 mm MOTORISED BACKGAUGE USED FUNCTIONAL MACHINE INTERNAL CODE: SVR 396 Nkedpoyv Hdnefx Ahvew

Year of construction: 2026, condition: new, IMIZUNI OB-2R/4800 cutter is compatible with onion solid husk blowing machines from various manufacturers. Precision of workmanship, massive structure made of acid-resistant steel make that besides production advantages, the machine is aesthetic and easy in keeping clean, and thus facilitates production keeping all hygienic rules. Njdeh Hbfuopfx Ahvekw Cutting machine capacity: with two people positioning the onion 100-120 bulbs per minute, with four people 120-180 bulbs per minute For cutter we suggest buying the visible in the picture inspection worm table.

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Working length 2.12m Distance between supports 30cm Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz Nksdpfx Aerx S Ucjhvjw - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Estimated weight: 300 kgs Functional machine offered without overhaul.

Condition: not inspected (used), Hydraulic guillotine shear Nkjdpfxsyv Dmye Ahvsw Cutting length: 3150 mm for steel ST 37 up to 8 mm thickness

Condition: excellent (used), Year of construction: 2004, Horizon HT-70 Year: 2004 Cutting thickness: 2 – 50 mm – Number of knives: 3 – Dimensions without trimming: Max: 330 x 330 mm; Min: 148 x 105 mm Nkjdpfsyv Dlpex Ahvew – Dimensions after trimming: Max: 300 x 300 mm; Min: 142 x 100 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,621 h, cutting width (max.): 76 mm, Equipment: compressor, documentation/manual, safety light barrier, Perfecta 76 UC 2005 Nksdpfx Ahsyv A Suovew program number of cuts:108.000 German language program, German language book.

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 7,500 kg, construction height: 1,200 mm, empty load weight: 1,620 kg, Paper roll clamp Load centre of gravity: 650 ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Nkedpsu Dy Hkofx Ahvsw Technical condition: very good Description: Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 004-2024, total length: 2,250 mm, total width: 950 mm, total height: 1,900 mm, overall weight: 740 kg, power: 6.5 kW (8.84 HP), TECHNICAL DETAILS Distance between saw bands: 45 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 / 60 Hz Power: 6.5 kW Operating current: 14.5 A Dimensions & Weight Dimensions (L x W x H): 2,250 x 950 x 1,900 mm Machine weight: 740 kg EQUIPMENT Fully made from corrosion-resistant AISI 304 stainless steel Two parallel saw bands Nsdpfx Aoyvzubshvskw Fully mechanized wheels Adjustable side band speed The machine comes from a business closure.

Condition: good (used), functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C3080 colour production system. Item for sale: 1 x Konica Minolta AccurioPress C3080 with the following equipment: Includes Intelligent Quality Care Unit IQ-501 Includes Paper Deck PF-707m Includes Booklet Finisher FS-513 Includes feeding unit Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 1,783,104 pages Colour: approx. 1,342,253 pages Black: approx. 440,808 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). Nksdpfexzn H Sjx Ahvew The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.