Used Paper Cutter Guillotine for sale (5,791)

Condition: good (used), Knorr RLE-3-K Paper Jogger The machine is 100% functional, ready to work. Technical data: Max format: 750 x 850 mm Stack height: 150 mm Weight: 300 kg Power supply: 400 V Air table Possibility of jogging to the right/left Rsdpfx Aozgc T Roahjw Adjustable tilt angle Adjustable jogging force

Condition: good (used), Logitrans LL1000TE Mobile Paper Stack Lift This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery and charger. Battery-powered. Rodpfxjzgc Tde Aahew Automatic and manual stack lifting and lowering cycles, fast operation. Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. Rjdpfx Aaozhpiuohjw The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Rjdpfx Aaozhnucehew

Year of construction: 1995, condition: like new (used), * Automatic flatbed die cutter * Very good condition. Cldsvexqcy Rsdpfxekyt U To Aahew * Possible to see in production. * Max size 1100x1600

Condition: good (used), Year of construction: 1993, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Rsdpfx Aszhmx Tjahow Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller model: E21S, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, table height: 800 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: documentation/manual, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 8 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Rodpoyt E U Ejfx Aahow Maximum sheet thickness: 8 mm Maximum cutting length: 3200 mm Blade rake angle: 1° 30′ Number of strokes per minute: 12 Back gauge travel: 600 mm (standard) Distance between side frames: 3450 mm Blade length: 3300 mm Table height: 800 mm Motor power: 11 kW Weight: 7300 kg Machine dimensions (L × W × H): 3850 × 2345 × 1620 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual in English Delivery to the customer is possible. Transport costs are calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Paper roll gripper, Bolzoni Auramo model AR-25RJ-16F (1-2 roll clamp, split long arm) Capacity: 2000 kg Redpfjy Uru Ajx Aahew Load Center: 800 mm Roll Range: 700-1600 mm Height: 830 mm Weight: 760 kg Horizontal Center of Gravity: 292 mm Vertical Center of Gravity: 360 mm Effective Thickness: 190 mm Warning: Sold without a solenoid valve. All information is on the data plate. Condition: Ready for operation and fully functional. Technical condition: Very good. Available from July 15th, following the installation of the new gripper.

Condition: new, functionality: fully functional, Year of construction: 2025, actuation type: electric, working width: 2,000 mm, cutting angle (min.): 1 °, stroke rate (min.): 40 1/min, sheet thickness (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, power: 2.2 kW (2.99 HP), overall weight: 500 kg, total length: 2,280 mm, total width: 550 mm, total height: 1,850 mm, warranty duration: 24 months, Equipment: emergency stop, steel thickness for cutting Rjdeymc Nyspfx Aahjw

Condition: like new (used), quantity 18 set Assorted Frömag grooving cutters, sold as a set Rjdezf Np Aspfx Aahsw -> 6x 6P9 - 15° Ø18-20 - A61 -> 2x 6P9 - 15° Ø17-18 - A60H / A60 -> 1x P59 - 15° - A-SO-60 -> 2x P59 - 15° - A51 -> 3x 4P9 - 15° Ø13-15 - A40 -> 1x 4P9 - 15° Ø12 - A40 -> 1x 3P9 - 15° Ø13-15 - A30 -> 2x 6 - Ø18-20 Individual purchases also available—just ask

Condition: used, quantity 23 Set Various grooving cutters for sale as a set Hünnema: -> 1x GH7 - 15° Ø18-20 -> 4x 6P9 - 15° Ø18-19 - A54W -> 1x 5P9 - 15° Ø15-17 - A34 Redpezf Npiefx Aahew WGW: -> 4x 5P9 - Ø13-15 - W50 TGW: -> 4x 4P9 - Ø13-15 - W50 -> 1x 5P9 - Ø16-17 - W53 -> 8x 6P9 - Ø18-19 - S54

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4633, total width: 1,800 mm, total length: 10,000 mm, total height: 2,140 mm, Working machine in exellent condition from German production Rodpfx Aajzhk Avohew System consists of 1 x Honsel type: F13, serial number: 4633 1 x Fischer & Kreck, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Rated cutting capacity: 6 mm steel sheet / ST 40 Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: Rjdpfx Aaezhklkshew - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 108461, EHT Trumpf hydraulic sheet metal shear, type TrumaCut 460 Rjdpfozf Ifiex Aahjw working width 6050 mm max. sheet thickness 4 mm steel Cybelec CNC control, type DNC 60-GS pneumatic sheet support device motorized back gauge automatic shear gap adjustment automatic angle adjustment side gauge 6000 mm

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Sheet thickness in carbon steel 2.5 mm Sheet thickness in stainless steel (700 N) 1.5 mm Rear stop up to 550 mm Rsdpfx Aozhka Uoahew .....FASTI: 1020 x 2 mm

Condition: used, Empty weight: 8.200 kg Dimensions (LxBxH): 310 x 218 x 210 cm Fuel tank: 170 litres Serial number: 6076105412 CE compliant: yes Cutting length: 3100 mm Max. plate thickness (St 45): 6 mm Stroke: 105 mm Reach: 350 mm Adjustable cutting speed: 15 cuts/min Rear stop: CNC Rodpjzhixvjfx Aahow Adjustable cutting angle: 1°30' Length: 4320 mm Width: 2180 mm Height: 2100 mm Oil tank capacity: 170 liters Weight: 8,200 kg Year of manufacture: 2012 Hold-up system: yes, pneumatic Original list price: 54,000 euros Touchscreen control panel Clear, easy-to-read LCD display 6 digits for Actual Value and Set Value 2 digits for cutting length 3 digits for part counting Program memory: 50 programs, each with up to 20 steps Sheet holding system Rear laser safety sensor Machine in excellent condition Loading fee: 500 euro Online auction of machinery and equipment from a steel fabrication company due to relocation, including a VOORTMAN CNC flat and angle steel processing line, MICROSTEP plasma cutting machines, a GEMA powder coating machine with drying oven and exhaust system, WHEELABRATOR blasting machine, MEUSER & CO radial drilling machine, DURMA CNC hydraulic guillotine shear and press brake, LVD press brake, HACO guillotine shear, BEHRINGER semi-automatic miter band saw, PEDDINGHAUS punching and universal punching-shearing machines, RÖSLER shot blasting machine, various DEMAG overhead cranes, VERNET DIJON forging hammer, AMADA CNC punching and nibbling machines, METORA band saw with roller conveyor, etc. The online auction opens Thursday 25 June and closes Tuesday 7 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Pickup day is on: - Thursday 9 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Laska KCU200 from meat free factory. Programmable model with loader for 200 litre tote bins. Rjdpjx Ilh Ajfx Aahsw

Condition: good (used), Laska KU 45 VKAB bowl cutter with cooking and vacuum options. Has come from a pilot plant in a major food company so has not been used very much. Complete contents of pilot plant also available. Rjdpfjx Ilqdox Aahsw

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Redpex N Nlzofx Aahjw

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Rodpfx Aex Dcpgsahow

Condition: excellent (used), Almost in new condition, this Treif slicer can be used on boneless or bone in products. Pork loins, bacon, sirloin steaks etc. Can cut from as low as a few mm thick. Rodpfx Aaex Awy Dshew

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Rjdevthdfepfx Aahew

Condition: excellent (used), Year of construction: 2014, operating hours: 1,350 h, machine/vehicle number: 14 083-1, Seydelmann K126 HU all stainless steel bowl cutter with rare option of fitted tote bin loader. Bought new in 2015 and only used for cutting herbs. Only used for 1,350 hours since new. Rsdpfx Ajvcqh Ejahsw

Condition: excellent (used), Treif block dicer in lovely condition. Perfect for producing cubes of meat from frozen tempered blocks. Rjdpoxrgiyofx Aahew

Condition: good (used), Year of construction: 2008, Seydelmann K754 vacuum and cooking bowl cutter direct from closed pate factory. Bought new in 2008. We can demonstrate the machine running. Redpfx Aaoqgfamshew