Used Paper Cutter Guillotine for sale (5,850)

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: Lotze Guillotine Shear Type K 20 TS 2000 x 3 Year of manufacture: 1980 Cutting length: 2000 mm Nsdpfx Ahoyxlbqjvjwd Material thickness: 3 mm Drive: 5 kW Back gauge: 750 mm Weight: 3,200 kg Price: EUR 1,500 plus VAT, ex works

Condition: new, Year of construction: 2022, VS 3006 guided guillotine shears with DURMA IV sheet holding device Special price* - Demonstration machine Operating hours: 0h Sheet thickness: 6 mm Cutting length: 3,080 mm Cutting angle: 0.5 - 2° Backgauge: 1000 mm via CNC Motor power: 11 kW Length: 4,100 mm Width: 2,050 / 3,650 mm Height: 1,950 mm Oil filling: 125 l Weight: 7,500 kg The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Nwodpfef U Th Esx Ahvod Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request. *including transportation and installation

Condition: new, Year of construction: 2025, Equipment: CE marking, Guillotine shear with pneumatic sheet holding device Cutting length: 3100 mm Sheet thickness MS (450 N/mm²): 6 mm Sheet thickness SS (700 N/mm²): 4 mm Strokes per minute: 15 1/min Cutting angle: 1º 30’ Number of hold-downs: 16 pcs. Maximum hold-down force: 14 t Backgauge: 1000 mm Backgauge speed: 200 mm/sec Motor power: 15 kW Oil tank capacity: 200 l Throat depth: 50 mm Njdpfx Ahjd Ewubjvswd Support arms: 2 pcs. Support arm with side gauge Table height: 865 mm Table width: 500 mm Table length: 3515 mm Machine length: 4110 mm Machine width: 2200 mm Total width: 3700 mm Machine height: 2100 mm Weight: 7650 kg Heavy-duty steel construction St 44 & stress-relieved, annealed machine frame D-Touch 7 touchscreen CNC controller, user-friendly centralized cutting angle adjustment Ball screw, 1000 mm & automatic swing-up Support balls in the table for improved material handling Side stop with scale & T-slot and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU Machines can be inspected and demonstrated at our demo center in Staufenberg by appointment at any time. Further machines are available ready for demonstration at our facility in Staufenberg. We are happy to provide further information upon request.

Year of construction: 2024, condition: new, Make: DURMA Type: MS 3004 Year of construction: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Number of strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Nwjdped R Emfjfx Ahvod Standard equipment EZM9910 control unit Backgauge range 750 mm programmable via control unit Plastic inserts for hold-down device 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop switch Spring flap stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180 The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Year of construction: 2024, condition: new, *image similar* Nedpfjhk Ngcex Ahvswd Technical data sheet length: 2.050 mm sheet thickness : 3 mm Total power requirement : 3 kW Dimension (LxWxH) 2,4 x 1,35 x 1,2 mm

Year of construction: 2024, condition: new, Motorized guillotine shears Technical data Cutting capacity: 2,5mm Nwsdpfx Aohk Nf Rshvsd Cutting length: 2550mm Cutting angle: 1°40' Stroke rate/min: 35 1/sec. Motor power: 3kW backgauge range: 550mm table width: 400mm table height: 850mm height: 1260mm width: 1350mm length: 3100mm Weight approx.: 1540kg

Year of construction: 2022, condition: new, Motorized guillotine shear MS 1303 Technical data: Sheet width: 1350 mm sheet thickness: 3,0 mm stand width - table width: 400 mm Nodpfxohk Nfue Ahvjwd working height: 850 mm Control: conventional

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm Nwodpod R Er Dsfx Ahved table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: excellent (used), functionality: fully functional, SHEAR SCM 2050 X 4 USED MACHINE INTERNAL CODE: SVR 365 Nwedpjxzgykefx Ahved

Condition: good (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, Hezinger Cutline guillotine shear, year of manufacture 2024, NC control unit ELGO P 40 T touch screen, servo-controlled backgauge 5 - 1000 mm, positioning accuracy 0.1 mm, cutting gap adjustment, cutting length 4050 mm, sheet thickness 400 N/mm² - 6 mm, sheet thickness 700 N/mm² - 4 mm, motor power 11 kW, strokes per minute 13, Nsdpfxsyxgbxj Ahvswd traverse speed 80 mm/s, oil capacity 250 liters, machine weight 12,000 kg, machine dimensions (L/W/H) 5600/3400/2200 mm,

Condition: used, Year of construction: 2006, functionality: fully functional, We are offering this used Edwards XDS6A creasing machine from 2006. Manufacturer: Rollem Model: XDS6A Price: 100 Euro Condition: used Category ID: 16 Type ID: 2467 Nwjdpfx Ahsyxfi Usvod Machine type: creasing machine If you have any questions or need more information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Nwedpjyxd Szsfx Ahvod Piesok Guillotine Shear Type NTH 3150/16 Year of manufacture: 1977 Cutting length: 3150 mm Material thickness: 16 mm Electric rear stop: 1000 mm Drive power: 26 kW Weight: 28 t Offered at a price of EUR 6,500—plus VAT, ex works location.

Condition: good (used), functionality: fully functional, tool type: SK 40, Cutter Holder SK40 Lorenz 4 pcs tool holders / cutter holders / shaping wheel holders for cutting wheels / shaping wheels / shaping knives in size SK 40 for Lorenz gear shaping machine, including the tool change device / tool holding device. In good used condition. 1 x Ø 31.75 x 120 for disc cutting wheel 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell-type cutter 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell-type cutter, special holder with centered mounting bore Ø9.9 for auxiliary tool Nwodsikvwqjpfx Ahvod 1 x Morse taper 2 for shank cutter wheel. Price / details on request. All technical data subject to typing errors / mistakes. We sell exclusively to countries of the European Community.

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Press force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening size: 119.5 cm × 65 cm Condition: Very good! Inspected and fully functional. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are warmly welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us ample time to inform you properly and show you the most suitable machines. Nwedjyxcdvopfx Ahvsd We are happy to assist you! Waste baler | Paper baler | Cardboard baler | Plastic baler | Waste compactor | Recycling | Textile baler | Waste processing

Condition: used, Bäuerle universal tool grinding machine for woodworking and metalworking tools. Nwsdsxytmuopfx Ahvsd

Year of construction: 2007, condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. SIMEX TF 800 Rock Cutter / Milling Head / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of manufacture: 2007 / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross Drum width: 800 mm Milling speed: 75 - 115 rpm Hydraulic motor power: 61 (83) kW (HP) Required oil flow: 105 - 190 l/min Required oil pressure: 350 - 200 BAR Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Recommended excavator weight: 14 - 22 tons Equipment: - incl. Liebherr SW48 adapter plate We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) available for immediate delivery. We carry a wide range of different attachments in our warehouse, all available for immediate delivery! Mr. Herden (phone) is happy to assist you. On request, we are happy to provide you with a financing quote as well. We are official sales and service partners of: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery Nwodoyxagnepfx Ahvod - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale reserved! Internal no.: 310390 = Further information = Curb weight: 1,035 kg For further details, please contact Marius Herden.

Condition: used, Year of construction: 2020, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). KEMROC EXR 60 HD surface planer / asphalt planer / milling attachment, incl. MS10 adapter plate / Year of manufacture: 2020 / in stock & immediately available Price: €24,890.00 net / €29,619.10 gross Nwodpfx Asyxaf Rehvjd Milling width: 600 mm Adjustable milling depth: 0 – 190 mm Recommended speed: 70 – 95 rpm Recommended oil flow at 100 bar: 150 – 200 l/min Min. oil flow: 150 l/min Max. oil flow: 210 l/min Max. hydraulic operating pressure: 380 bar Torque at 350 bar: 9,300 Nm Cutting force at 350 bar: 28 kN Operating weight: 1,400 kg Number of picks: 69 Recommended excavator weight: 15 – 23 t Rated power: 80 kW Equipment: - incl. MS10 adapter plate - incl. spare picks - incl. hydraulic hoses as shown in photos - incl. transport frame We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a large selection of various attachments, all ready for immediate delivery! Mr. Herden (phone ...) will be pleased to assist you. On request, we are also happy to provide attractive financing options. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction equipment - Mercedes-Benz - Iveco With over 800 used commercial vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers. Subject to errors and prior sale! Internal no.: 100439 = More information = Please contact Marius Herden for further information.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change Nwodpfx Ahsif Ek Roved • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization Nwsdpfsfnlkwjx Ahvjd (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 - Drive system: CNC - Control system brand: Beckhoff - Power [kW]: 16.8 - Resonator brand: Hypertherm - Resonator type: Powermax 105 - X-axis travel [mm]: 3000 - Y-axis travel [mm]: 1500 - Max. material thickness [mm]: 32 - Control type: Beckhoff - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Njdpfx Aoxrz Hmohvewd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 Nwsdpfxsfhgvws Ahvjd incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. Nwodpfx Ahjwgc I Rovsd • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Scale with platform for ( Jogger ) vibrating table Nwjdpfx Ahjizi Icovsd ( Without Jogger )

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm max. cutting width: 3080 mm machine weight: 5600 kg Very good, ready-to-use condition. Njdpfxoyiutis Ahvswd

Condition: good (used), You are bidding here on a branded guillotine shear and folding bench from a very reputable and well-known manufacturer – Schechtl. Device specifications: Guillotine Shear HT 200 - Capacity: 1.25mm steel, aluminum, etc. and more - Cutting length: just over 2m - Depth stop - Front support, extendable Folding Bench - KS model – Capacity: 1mm steel, aluminum and more (up to 1.5mm) - Bending length: just over 2m - Foot-operated closer - Optional depth stop or beading attachment - Round rollers and additional guide rails included - Sale according to §25a UStG Optionally, I offer the possibility to purchase a segment bending bench from the top manufacturer Cidan – likely the market leader. Cidan Machinery also includes Thalmann (top manufacturer of long folding machines) and Forstner (leading slitting line manufacturer). Nwsdjyw Si Ejpfx Ahvjd This is the heavy-duty version – 1m / 2mm steel - Aluminum and more significantly higher capacity - Triple-segmented - Angle display - Foot-operated closer - Storage box Note: The segment bending bench can be purchased in addition to any of my machine sets, but will not be sold separately. Additional price available upon request. The machines are in good and clean condition and ready for immediate use. They come from private ownership. Important: Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing – such as folding benches, guillotine shears, drill presses, roll bending machines, slitting and profiling machines, accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from leading top manufacturers in our shop. If you have any questions, I am always available to help. You will receive an invoice according to §25a UStG. The invoiced amount includes VAT (differential taxation applies). Free loading available – weight approx. 750 kg and 650 kg. Inspection and testing by appointment via phone is possible and encouraged. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should occur within 10 days after the auction ends. Location: 97249 Eisingen, approximately 3 minutes from motorway A3 and A81. Item number: Folding Bench KS and HT