Used Panther 150 for sale (9,507)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 17,893 h, load capacity: 15,000 kg, lifting height: 1,980 mm, free lift: 1,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,380 mm, power: 122 kW (165.87 HP), fork carriage width: 1,800 mm, fork length: 1,590 mm, empty load weight: 23,000 kg, total length: 3,860 mm, drive type: Diesel, construction width: 1,800 mm, Compact forklift - diesel Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: standard Technical condition: very good Hfjdew Hh D Dspfx Agfof Front tires type: solid rubber Front tires size: 40x16x30 Rear tires type: solid rubber Rear tires size: 28x12x22 Heater, full cabin, full free lift, CE certificate,

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Equipment • program • air table • side table right Hjdpfx Agod Iapyefjff • side table left • light barrier • 2 knives

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders Hodpfjdubvqsx Agfsff • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • belt delivery

Condition: good (used), Size: 320 x 420 mm; min 75 x 150 mm Speed: max 9000 Ex./h Number of stitches Standard: 11 Stitching length: 19 mm Power requirements: 50 Hz, 3 Phasen kW (220/380V, 50Hz) Hfsdjr Duu Aepfx Agfof Compressed air: 4 bar Weight: 2300 kg (approx.) Engine speed: 2,5 kw

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Hedpfx Aevx Nfbsgfeff Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Hfodpfxeklv H Ie Agfsf Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: electric, color: other, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 100 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Hfsdsywf Hqspfx Agfsf FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 1996, Transnorm curved belt conveyor right 150°-780-600-IR600 RA2002 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) Motor: will be changed conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Hfodpfx Aok Abr Ssgfjf

Condition: used, Year of construction: 1996, Transnorm curved belt conveyor left 150°-780-600-IR600 RA2017 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: will be changed Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. Hfedpfok Abubsx Agfsf We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Hsdpfxok Aa Ryj Agfoff Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, gebraucht 6019 390 € 1 Hfjdpfx Aeytx Hujgfef 270 € 40 kg 1500 mm 600 mm 1000 kg 700 - 1.000 mm MINT CONDITION 3 table elements with 6 balls each

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Hjdsytx Uxjpfx Agfjff Motor output 1,5 kW

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Hfedpfsytx T Ijx Agfof Motor output 1,8 kW Götzinger HR 150 - Hoffmann system The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment (technical data according to manufacturer - no guarantee!)

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp Hodpoytrxksfx Agfeff - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Hjdpfxjytd Spj Agfjff Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 5,550 mm, total width: 2,070 mm, total height: 2,480 mm, loading space length: 2,850 mm, loading space width: 1,600 mm, loading space height: 1,750 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electric window regulation, navigation system, power mirror, General information Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 2.299 cc Max. front axle load: 1850 kg Max. rear axle load: 2100 kg Weights Empty weight: 1.956 kg Carrying capacity: 1.544 kg GVW: 3.500 kg Functional Hsdpfjyk Al Nex Agfoff Maximum cooling temperature: -20 °C Cooling engine: engine driven Maintenance APK (MOT): tested until 12/2027 Financial information VAT/margin: VAT qualifying Other information Cool unit make: Carrier = Additional options and accessories = - Airbag - Beifahrerbank - Immobiliser - Outside temperature display - Parking sensors - Radio - Reversing camera - Suspension seat - Tined glass = Remarks = Cool unit brand: Carrier

Condition: used, Year of construction: 2008, sheet width - max. 5-150 mm coil weight 2,0 t Belt thickness 0,2-1,5 mm band speed 0-20 m/min driving torque 290 Nm table-size 1500 mm Control Siemens-Leicht range L-W-H 2.000 x 1.500 x 1.900 mm total power requirement 0,75 kW Hjdpfx Aeyr Slhjgfjff weight of the machine ca. 0,6 t

Year of construction: 1985, condition: excellent (used), functionality: fully functional, Manufactured by Voronezh plant (Russia) Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Hfjdpfx Aoxwd Iwogfof Press weight, kg 141500

Condition: used, mileage: 61,900 km, power: 382 kW (519.37 HP), first registration: 03/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Rear crane Palfinger-Epsilon Q150Z96, year of manufacture 2023, elevated seat control with folding protective roof, rotator with Palfinger-Epsilon log grapple type FG53. Lifting diagram: 5 m – 2,780 kg, 7 m – 1,950 kg, 9 m – 1,470 kg. ---- Pavic short timber transporter with 4 Optipa steel stanchion bodies and 8 one-piece aluminum stakes. ----* MAN ComfortSteering (electronically controlled steering system) * Connectivity board module (Rio Box) * 12-speed automatic transmission * MAN EasyStart (anti-roll back) * MAN EVBec (electronically controlled exhaust valve brake) * MAN Media System Professional Navigation 12.3 inch * Rear axle differential lock * Anti-slip regulation (ASR) * Air-suspended rear axle * Digital axle load indicator (ALM) in the cab, air-suspended axles * Duomatic brake connection * Anti-lock braking system (ABS) * Emergency Brake Assist (EBA) * Retarder * Electronic Stability Program (ESP) Hsdpfeyvwriox Agfeff * Disc brakes * Full brake assist * MAN AttentionGuard driver alert system * Electric sliding/tilting glass sunroof * Battery master switch * Lane departure warning (LDW) * Transparent external sun visor * Electrically adjustable and heated exterior mirrors * Air horns on cab roof * GM cab – the spacious version (wide, long, medium-high) * Air-suspended cab mounting * Central locking with remote control * Immobilizer (transponder) * Transmission function MAN Idle Speed Driving * MAN TipMatic 12 28 OD transmission * Additional cab thermal insulation * Automatic climate control * Auxiliary hot water heater * Heated driver’s seat * 590-liter fuel tank * Euro 6 engine * Cruise control * Transmission function EfficientRoll * Transmission rocking mode * Engine version with AdBlue * Maul-type trailer coupling * Air-suspended driver’s seat * High beam assistant * Lower bunk * Driver Comfort Package Plus * Refrigerator in drawer under the bed * Storage box * EBS * No spare wheel ---- Sale to trade customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: good (used), I have three Simon Heseen V3/150 110kW pelletizers for sale - after general renovation - very good condition Hedpfx Aowcddlogfoff - ring matrix 450 mm/109 mm for 8 mm or 6 mm pellets - 110 kW engine

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). Hedpfxeyvvbce Agfoff 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Hook – 40 tons (1 piece, new). Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: new, Year of construction: 2026, neu 2026 070168 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 150 to horizontal verschiebbar 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2480 mm 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable Hjdpfx Agjwirt Isfoff table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, mileage: 39 km, power: 150 kW (203.94 HP), fuel type: electric, first registration: 03/2026, color: blue, number of seats: 5, Equipment: ABS, air conditioning, navigation system, * 30-color ambient lighting * Armrests for front seats on both sides * Heated windshield in heat-insulating glass * Lumbar support, pneumatically adjustable on both sides * Seat heating for both seats in the cab, separately adjustable left and right * App-Connect incl. App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 speakers at the front and 4 speakers at the rear) * Digital radio reception (DAB+) * "Comfort" cell phone interface with inductive charging function * "Discover Pro" navigation system * Anti-lock braking system (ABS) * Airbags for driver and front passenger, with front passenger airbag deactivation * Automatic distance control ACC "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, back-up horn and towing protection * Travel Assist driver assistance system including Lane Assist lane departure warning system and Emergency Assist * Front Assist emergency brake assistant with pedestrian and cyclist detection * Automatically dimming interior safety mirror * Proactive occupant protection system in conjunction with Front Assist * Electromechanical power steering, speed-dependent control * Rear view camera * Intermittent windshield wipers with rain sensor * "Side Assist" lane change assistant * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 "Solna" alloy wheels 8 J x 20 at the front, with 10 J x 20 at the rear, in black, high-sheen finish * Folding towbar, with electric unlocking system * Changing the surround of the infotainment display, central controls and steering wheel from electric white to black * "Plus" assistance package including "Area View" with "Rear View" reversing camera * Evasion support and cornering assistant * Convex exterior mirrors on driver's side, convex on passenger's side * Electrically adjustable, folding and heated exterior mirrors, with lowering front passenger mirror * Three-point automatic front seat belts with belt tensioners and height adjustment * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Black surround for the infotainment display and central controls * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150KW Basic motor is: N06/N07 * Transmission for electric drive (1-speed) * HT - LED matrix headlights with automatic headlight switching, bad weather light, welcome function * Air Care Climatronic air conditioning system with active combi-filter, stationary air conditioning and 2-zone temperature control * Comfort seat left and right, in the 1st row of seats * Short wheelbase, hatchback * LED luggage compartment lighting * Light alloy wheels "Solna" 8 J x 20 front, 10 J x 20 rear, in black, high-sheen finish * Headlight range adjustment, dynamic, with dynamic cornering lights * Memory function for "Park Assist Plus" parking assistant * Multifunction steering wheel in imitation leather, with touch controls, heated * LED tail lights with dynamic blinker lights * Park Assist Plus parking assistant incl. parking aid * "Ready 2 Discover" radio with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * Rear View reversing camera as an alternative to the Area View in the "Plus" assistance package * Rear windows in darkened heat-insulating glass Hodpfxewz T Epj Agfsff * Electric sliding door left & right * Tire monitoring display

Condition: used, mileage: 307,295 km, power: 107 kW (145.48 HP), first registration: 09/2011, fuel type: diesel, overall weight: 4,500 kg, next inspection (TÜV): 10/2024, color: white, gearing type: mechanical, number of seats: 3, total length: 6,848 mm, total width: 2,070 mm, Equipment: ABS, central locking, According to our "General and Extended Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle today subject to prior sale, mistakes, and errors reserved, and non-binding until conclusion of contract: Renault Master 4,500 kg Panel Van (Vehicle 332) First registration: 01.09.2011 307,295 km Engine 2,299 cc 107 kW / 146 HP Gross vehicle weight: 4,500 kg Total length: 6,848 mm Total width: 2,070 mm Long and high panel van Leaf suspension Tyres front 195/75R16C approx. 30%, rear approx. 50% Tow bar 270-degree double rear doors Wooden interior lining Lashing eyes Tow bar Side sliding door (passenger side) 3 seats Hfjdpfoyvmztex Agfof 6-speed manual transmission Radio/CD 2 x electric windows, electric mirrors Tachograph Central locking with remote control Price: €5,000.00 (net) All information provided without any guarantee or warranty. Our "General and Extended Terms and Conditions" apply. Court of jurisdiction for both parties up to a dispute value of €5,000.00 is Amtsgericht Ludwigslust; for higher dispute values, Landgericht Schwerin. Subject to prior sale, mistakes, and errors.

Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2023, Equipment: air conditioning, = Further options and accessories = - Leaf spring suspension = Comments = Fuel tank: 180 ltr. Air conditioning Hsdpfx Aowlikcsgfeff Front winch: Electric winch 24v Pulling capacity: 8,165 kg / 18,000 lb. Steel cable length: 31 mtr. Equipped with cargo body: Open cargo body with dropsides. Suitable for transporting cargo and people. 2 steel dropsides per side. Toolbox Steel mudguards Chequered steel floor 8 lashing rings Dimensions of tarpaulin box: 5,200 mm x 2,500 mm = Further information = Transmission: ZF6S1005TO, manual gearbox Year of manufacture: 2023 Tire size: 14.00R20 Suspension: leaf spring Front axle: steered GVW: 15,000 kg