Steady rests 500 / 350 / 150 mm

Poreba TPK 90-

Condition: ready for operation (used), Year of construction: 1984, spindle speed (max.): 800 rpm, spindle motor power: 16,000 W, total height: 1,800 mm, overall weight: 7,300 kg, number of axes: 2, This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine. Additional equipment • Standard equipment includes Coolant pump, Chuck guard, Tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, incl. display, installation, and calibration • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers • MULTIFIX quick-change tool post Machine Benefits Bsdpjyaqinefx Aafecu Technical Machine Benefits • Distance between centers / turning length: 5000 mm • Swing in gap: 1200 mm • Maximum workpiece weight between centers: 6000 kg • Maximum workpiece weight between centers + 1 steady rest: 7500 kg • Maximum workpiece weight between centers + 2 steady rests: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): - longitudinal: 0. 1 – 12. 8, - cross: 0. 05 – 6. 4 Extra Information Machine completly overhauled. Comes with 12 months warranty. Dimensions Machine Depth 7500 mm

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Bsdpfx Aju U Nareafjcu Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 1984, - distance between center / turning length: 5000 mm - turning diameter over bed: 930 mm Bcodpfxswnnuxj Aafeu - turning diameter over support: 650 mm

Year of construction: 2024, condition: reconditioned (used), functionality: fully functional, This universal lathe machine can be generally overhauled and modernized and will be available within 3 to 3,5 months, starting from the customer´s order. We give a full 12 months warranty for this machine (spare parts, material, electronic cabinet). Bcedpfx Ajkh D Txoafsu Details of the overhaul and detailed specs see attached PDF-files.

Condition: new, Year of construction: 2025, machine/vehicle number: 0000, We offer complete revised FAT Lathes, in factories geometry, bed ground by FAT, new electrics, TUR 630 M x 2000 or TUR 630 M x 3000 TUR 630A x 3000 or TUR 630 A x 4000 spindlebore 140mm , 2 chucks 400 mm Bison Machine deliverytimes 3 - 4 Months after written order Accescories as per Customer specifications Bjdpfx Aenqzaieafocu

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Bcedpfx Aeiwa Iasafju Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, total length: 10,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 9,200 kg, The PORĘBA TPK-90/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 8000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm Bsdpjdyvh Nefx Aafocu - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 10000 mm width: 1800 mm height: 1865 mm total weight: 9200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will Bcedpefg E Hpefx Aafsu driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, functionality: fully functional, turning diameter: 930 mm, turning diameter over bed slide: 650 mm, turning length: 6,000 mm, total width: 8,500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, under power and can be inspected at any time. Equipment as shown in the photos. Bsdpjv Epkkjfx Aafjcu Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 6000 mm turning dia. in gap: 1250 mm spindle bore: 95 mm turning speed range: 8 - 800 U/min total power requirement: 25 kW dimensions of the machine ca.: 9 x 2 x 1,9 m faceplate 2 steadies Bcedovndddopfx Aafsu coolant attachment taper turning attachment *

Condition: excellent (used), functionality: fully functional, Swing over bed: 1290mm Swing over cross slide: 910mm Swing in gap (l:500mm): 1580mm Center distance: 6000mm Spindlebore: 155mm Spindle speed: 6-800rpm Spindle nose: ASA A2 11" Workpiece between centers: 20 tons Taper in tailstock: Mk6 Longd.feed: 0.045-5mm/r Crossfeed: 0.0220-1.5mm/r Thread metric: 0.5-56 Thread's modulus: 0.25-28 Threads whitworth: 1/2-84/ " Bsdpfowc Nzpsx Aafecu Spindle motor: 30 hp Manufacturing year: 1971 Length: 9500mm Width: 2000mm Height: 1600mm Weight: 13400kg Sony DRO cross slide 3 pcs. Steady rests Face plate 4-jaw chuck Hardened guideways Power on topslide

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 95 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, quill diameter: 130 mm, total length: 6,500 mm, total width: 1,750 mm, total height: 1,435 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 7,200 kg, disc diameter: 500 mm, quill mount: MK 6, workpiece weight (max.): 9,000 kg, spindle mount: MK 6, Lathe TPK 90 x 4000 mm. Manufacturer: PORĘBA (PL) - 1987. Swing over bed: 930 mm. Swing over cross slide: 630 mm. Swing in gap: 1200 mm. Spindle bore: 95 mm. Spindle speed range: 8–800 rpm. Carriage feed range (80): - Longitudinal: 0.1–12.8 mm/rev - Cross: 0.05–6.4 mm/rev Two-speed motor: 15/22 kW. Internal taper: Morse 6. Workpiece weight capacity: - In chuck: 800 kg - Between centers: 6000 kg - With 1 steady rest: 7500 kg - With 2 steady rests: 9000 kg Max. turning length between centers: 4000 mm. Top slide travel: 300 mm. Dimensions (L x W x H): 4500 x 1750 x 1435 mm. Weight: 7200 kg. Bsdpfx Aowa S Awoafocu Equipment: 3-jaw self-centering chuck, Steady rest 615 mm, steady rest 415 mm.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm Bcedpfewk Iq Esx Aafou - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 6,000 rpm, table width: 1,100 mm, table length: 4,200 mm, rotational speed (max.): 6,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic universal head, 0.02 degree in both axes Bcsdow Ngd Tspfx Aafsu Machine will be refurbished in 2025

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1102-139, turning diameter over bed slide: 930 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, torque: 8,500 Nm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: conventional Working area Turning diameter over bed: 930 mm Turning diameter over support: 630 mm Turning length: 2,000 mm Center height over bed: 465 mm Spindle Spindle bore: 95 mm Speeds: 7 - 710 rpm Torque: max. 8,500 Nm Adapters and accessories Faceplate diameter: 800 mm Chuck diameter: 400 mm Bcjdpjwfhbaefx Aafou MACHINE DETAILS Machine weight: approx. 8,600 kg EQUIPMENT - 1 steady rest