Press Brakes

BYSTRONIC P 150 x3100

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Gjdpfxsvxipgs Agbjtt Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain, controller model: TNC640, Control : Heindenhain TNC 640 Technology : Direct drive Speed : 12,000 rpm Power : 30 kW Torque : 176 Nm Taper : SK 40 Toolchanger : 40 stations Gedpotpm Stsfx Agbstt Working area Movement X : 1,000 mm Movement Y : 600 mm Movement Z : 650 mm Fixed Table (X/Y) : 1,100 x 600 mm Load capacity : 1,200 kg Others Rapid traverse (X/Y/Z) : 36/36/32 m/min

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Gtodpfxjwq Dpqs Agbot Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: good (used), functionality: fully functional, Year of construction: 2011, working width: 1,300 mm, throat depth: 410 mm, distance between stands: 960 mm, operating speed: 20 mm/s, reverse speed: 20 mm/s, overall weight: 3,600 kg, total length: 2,740 mm, total width: 2,140 mm, total height: 2,317 mm, input voltage: 200 V, pressing force: 36 t, working length: 1,300 mm, CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Year of construction: 2011 Pressing force: 352 KN Table length: 1300 mm Bending length: 1300 mm Distance between uprights: 960 mm Frame depth: 410 mm Maximum stroke: 150 mm Opening: 420 mm Motor power: 200 V with transformer for 400 V Power: 13.2 kVA Total length: 2740 mm Gjdpfx Aewgw Hhogbstt Total width: 2140 mm Total height: 2317 mm Machine weight: 3600 kg

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Gjdpfx Agsru Unbobstt

Condition: like new (used), Year of construction: 2024, Teschniche data: Gsdpfxsh Ib T Uj Agbjtt Sheet length 4,100 mm sheet thickness 6 mm width of the stand - mm Total power requirement 15 kW weight approx. 11,5 kg Dimension (LxWxH) 5250 x 2300 x 22150 mm Backgauge 1000 mm D-Touch 7 touch screen CNC control, user friendly Central cutting angle adjustment Ball screw, 1000 mm & automatic swivel open Support balls in table for better material handling Side stop with scale & T-slot and tilt stop Support arms with T-slot and tilt stop Cutting line illumination & 1 m hinged finger guard High performance hydraulic and electronic components Automatic pressure adjustment Pivoting backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our site in Staufenberg. We will be happy to provide you with further information on request.

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Gsdpot Iklkefx Agbett Weight: approx. 3,000 kg

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Projection 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Gedpfx Aogiud Hogbott Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Gjdpfx Aorz Tutsgbett Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment Gtsdped N H A Nsfx Agbst - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition