Used Paint Mist Extraction for sale (9,741)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, DFPRO16-Cyclo 400-690 volt, 18.5 kW, year 2008, price €3,500. Can be inspected under power due to insolvency. Lodpfx Afexcgw Ssfsak

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. Ljdex Agpzjpfx Affoak The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: used, Extraction installation Riedex MD-280 Connection diameter 300mm Filter Bags 48 Pieces Capacity 6000m³/h Electric knock motor Main fan 11kW Transport fan 4kW Filter bags need to be replaced complete with control box and +/- 40m pipes. Lodowng Nnopfx Affsak Total dimensions filter box: 1200x3400x3400mm - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 48 - Connection diameter [mm]: 300 - Main fan power [kW]: 11.0 - Control cabinet present: Yes - Shaking system: Yes - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 4.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2003, condition: good (used), functionality: fully functional, Manufacturer: HERBOLD Model: CS450/600-2A Rotor / grinding chamber dimensions: 450 x 600 mm Number of rotor blades: 5 Number of stator blades: 2 Drive motor power: 22 kW Lodpfx Afoxl R Imsfjak Spare blades: 3 pcs Additional screens: 5 pcs Equipment: Milled material discharge + silo This mill features three additional, different material infeed options (various designs)!!!

Condition: used, We are offering a welding fume extraction unit from the brand Euromate. Please contact us for a quote. Lodjxz R Aiopfx Affjak

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Lasdpfx Aexxh Taoffok Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, volume flow: 2,400 m³/h, overall weight: 30 kg, power: 0.37 kW (0.50 HP), noise level: 67 dB, MAKRA oil mist collector system Lsdjxxihljpfx Affjak Technical characteristics: Supply voltage: 400 [V] Weight: 30 [Kg] Air volume: 2400 [m³/h] Cycle: 50 [Hz] Installed power: 0.37 [kW] Noise level: 67 [dB] Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Year of construction: 2012, condition: excellent (used), 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, available immediately - Oven according to DIN EN 1539 for solvent-based materials - Max. temperature: 300°C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3L/PE 50Hz - Cable with 63A plug, also suitable for fixed installation, then fused at 35 or 50 A Ledpjiq Uv Nofx Affoak - incl. 1 wire shelf insert - Weight 550 kg - Documentation Inspection possible by appointment at our warehouse. Oven, ovens, industrial oven, circulating air oven, chamber air circulating oven, tempering oven, heat oven, drying oven, curing oven, paint dryer, solvent oven

Condition: good (used), Brilex vacuum unit type KER enclosed with pipework included Ledpfxoxzz D Rs Affjak

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm Lsdpfsxzrzaex Affsak DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Condition: excellent (used), Asecos Extraction Weighing workstation with fresh air curtain Air technology test according to DIN EN 14175-3 (5.4.4) Lajdjvydzaepfx Affek Compliance with the prescribed workplace limit values Construction made of chemically resistant, plastic-coated sheet steel Vibration-free installation of an analytical balance on the granite block decoupled from the hazardous substance workstation No blowing away of the weighing goods due to the fresh air curtain in the front plane External dimensions (WxHxD): 1200 x 1300 x 850 mm Internal dimensions (WxHxD): 1180 x 1260 x 500 mm Condition: used Scope of delivery: (Asecos extraction) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2017, operating hours: 22,300 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, filter area: 222 m², suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC Filter Ventilation Tower - 20,000 m³/h Ledpsxxhwrjfx Affoak Industrial Hall Filter Ventilation for Welding Shops — suited for various technological processes in production plants, predominantly during metalworking operations. Ultra-low energy consumption thanks to the implementation of innovative fan technology. Utilizes an EC (Electronically Commutated) fan instead of a standard unit, delivering SIGNIFICANT savings by minimizing power usage. The EC fan, equipped with an integrated inverter, allows variable speed control and enables adjustment of energy consumption/performance within the 60%, 80%, and 100% operating ranges. Air is drawn in from above and gently discharged near floor level directly at workstations, avoiding unpleasant drafts. Based on the principle of stratified filter ventilation, the unit does not require ductwork installation. Equipped with self-cleaning cartridge filter elements, using compressed air pulses during operation. Filter cleaning is managed by differential pressure control, preventing compressed air wastage. Stratified ventilation principle: contaminated air is drawn from above, filtered, and then released at floor level as clean, respirable air without creating drafts, at speeds below 1.2 m/s—precisely where operators work. Covers a wide 270-degree area. The AirTower operates according to the stratified ventilation guidelines recommended by trade associations, considered the most effective method of air recirculation. Year of manufacture: 2017 Operating hours: 22,300 Specifications: - 4 EC fans, each 3.9 kW - Airflow: 20,000 m³/h - Filter area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire safety package - EC Blue energy package - Hall dust sensor: dust level sensor with LED indicators, transmitting air quality data to the AirTower for automatic power adjustment Energy savings depending on the current dust concentration in the hall. Exceptionally quiet operation Stock no.: 1067

Condition: good (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, filter area: 20.4 m², input voltage: 400 V, volume flow: 3,200 m³/h, overall weight: 336 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, DONALDSON DMC-D1 Torit Dryflo oil mist extraction and filtration system Technical characteristics : Serial N°: 261-4508 Supply voltage: 400 [V] Ljdpfoxxid Hjx Affjak Weight:336 [Kg] Air volume: 3200 [m³/h] Filter area: 20.4 [m²] Cycle: 50 [Hz] Installed power: 3 [kW] Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: new, Year of construction: 2025, warranty duration: 12 months, total width: 1,900 mm, total length: 1,800 mm, total height: 1,550 mm, SPRAY STRIPPING MACHINE – TECHNICAL SPECIFICATION 1. EXTERNAL DIMENSIONS Width: 1 800 mm Length: 1 900 mm Height: 1 600 mm 2. WORKING DIMENSIONS Width: 1 300 mm Length: 1 300 mm Height: 670 mm* 3. TECHNICAL CHARACTERISTICS Total power: 9.2 kW Heating power: 7.0 kW Pump power: 2.2 kW Number of nozzles: 24 Fluid flow rate: 320 l/min Operating pressure: 4.5 bar Operating temperature: 85°C Construction material: AISI 316 (1.4401) acid-resistant stainless steel 4. TANK CAPACITY & HEATING SYSTEM Indirect heating medium: 167 l (±2%) Main tank capacity (stripping fluid): 480 l (±2%) Heating system: indirect heating jacket, separately controlled Laedpeghl Dzsfx Affjk 5. MACHINE CONSTRUCTION Machine tank equipped with 4 adjustable legs for levelling. Control panel mounted on the machine base. Equipped with an industrial CLICK-CLACK quick-release connector. 6. CONTROL SYSTEM 2 × temperature controllers: One for the heating jacket One for the main processing tank Process time controller LED indicator lights for monitoring correct process operation. 7. DEVICE CAPACITY Suitable for 4–8 rims up to 23”. 8. PLATFORM GRATE Made entirely of acid-resistant stainless steel AISI 316 (1.4401). Serves as a durable, chemically resistant working area for placing rims or other items to be stripped. 9. ROTATING NOZZLE SYSTEM 2 Rotating Arms The machine features two rotating arms, each equipped with a section of the 24 specially engineered nozzles. Nozzles provide multidirectional, high-pressure spraying for fast and uniform paint removal. Designed for maximum coverage, including internal and hard-to-reach areas of the rim. 10. APPLICATION Spray stripping machines represent a modern and highly efficient method of removing paint from alloy wheels. Their use is increasingly appreciated in automotive workshops, tyre services and professional rim refurbishment facilities. Using this machine significantly improves working comfort by providing perfectly cleaned surfaces, allowing all further service operations to be performed faster and with higher precision. 11. KEY BENEFITS Ideal for rim refurbishment centres, tyre services and automotive workshops. Perfect stripping results thanks to counter-rotating spray nozzles. Extends the service life of other tools and machines due to improved pre-cleaning. Optimises employee working time and increases process efficiency. Ensures consistent, precise and repeatable stripping performance.

Condition: excellent (used), Year of construction: 2015, 1 x Oil Mist Extraction Unit LTA Basic Line 01 Year of manufacture: 2015 In very good condition. Technical data: Power: 780 VA Voltage: 230 V Weight: 85 kg The extraction unit can be inspected under power. Ledpfsxy R Shsx Affjak

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Ljdpfxeulc S Rs Affoak

Condition: like new (used), Year of construction: 2021, operating hours: 37 h, functionality: fully functional, machine/vehicle number: 21001926, overall weight: 1,110 kg, total width: 1,510 mm, total length: 2,060 mm, total height: 3,000 mm, noise level: 71 dB, filter area: 76 m², Equipment: type plate available, Filter tower for oil and emulsion mist extraction and filtration for local ventilation. Modular system with permanent filter cartridges and two integrated, sound-insulated EC fans, adjustable via ESTA EasyControl, for installation in the work area. Application: Oil and emulsion mist extraction Lasdpfx Aoww Itmsffok The unit has only 37 operating hours and is therefore as new Original net price: €24,000 Sale only for self-collection and without warranty

Condition: used, Year of construction: 2017, operating hours: 20,700 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC filter ventilation tower - 20,000 m³/h Industrial hall filter ventilation for welding halls — suitable for numerous technological processes in manufacturing facilities, mainly those involving metalworking. Extremely low energy consumption thanks to innovative fans. Features energy-saving EC fans instead of standard fans, providing SIGNIFICANT savings by minimizing electricity usage. The EC fan with integrated inverter enables precise control of fan speed, energy consumption, and device efficiency. Adjustable operating range: 60%, 80%, or 100%. Lodpfxjxxalnj Affeak Air intake from the top with draft-free air discharge at floor level — precisely at workstations. Layered filter ventilation system; no need for pipeline installation. Self-cleaning cartridge filter elements — cleaned automatically by compressed air pulses during operation. Filter cleaning is based on differential pressure, ensuring no compressed air losses. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air with no drafts, at a velocity below 1.2 m/s — directly where employees breathe, covering a broad 270-degree area. The AirTower operates in accordance with the layered ventilation method recommended by professional associations, considered the optimal form of air circulation. Year of manufacture: 2017 Operating hours: 20,700 Specifications: - 4 EC fans, each with 3.9 kW power - Airflow rate: 20,000 m³/h - Filter surface area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire protection package - EC Blue Energy Package - Hall dust sensor — LED-indicated, transmits dust concentration data to the AirTower to adjust device output automatically. Enables energy savings based on current dust levels in the hall. Very quiet operation Stock no.: 1066

Condition: used, Year of construction: 1999, total height: 780 mm, total width: 1,080 mm, total length: 1,120 mm, - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 40646 - Voltage [V]: 400 Laedsxv U Tzspfx Affek - Current consumption [A]: 6.6 - Power [kW]: 3.0 - Transport dimensions: 1120mm x 1080mm x 780mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 20700114-2016, year of last overhaul: 2025, Equipment: documentation/manual, Piston pump for sale due to surplus. It was only used to spray four front doors with water-based high-build coating, so it is practically as new! Without spray gun. Ledpfjxyt T Uex Affsak Service and spare parts are easily available from Hendrichs, Eupen or B&M.

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Maximum component weight: 750 kg Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Laodpfx Afoxhcx Aofjk Load per suspension traverse: 400 kg Corresponding technical drawing available

Condition: excellent (used), Height 575 cm Width 235 cm Height 230 cm Approach under a 240 cm container Fan 1 motor 5.5 kW Fan 2 motor 8.6 kW Lsdoumw I Nepfx Affoak

Condition: new, Design with bag filters and integrated extinguishing device Technical data: extruction nozzle 250 mm engine power S1 6,5 kW, 400V nominal volume flow 3534 m³/h max. volume flow 4900 m³/h cut surface vacuum measured with 2 m hose 2740 Pa filter area 22,4 m² Laodpfxsvr I R Ae Affek filter dedusting compressed air chip collection volume 2 x 250 l residual dust content H3 (

Condition: good (used), Year of construction: 2002, functionality: fully functional, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter KELLER VARIO T. Suitable for plasma, laser, sandblasting, soda blasting and all kinds of dry dust. The fan is located after the filter on the clean side, which reduces the risk of explosion to a minimum. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan power: 3.3 kW Inlet diameter: 315 mm Capacity: 1300 m3/h Vacuum: 4800 Pa Lodpfx Afjvu Rylsfjak Dimensions: Height – 2.05 m Width – 1.02 m Depth – 1.60 m Weight: 700 kg

Condition: used, Grinding dust extraction Laedpecfy Hqjfx Affek