Stationary extraction system

Hurrica Dambauer STF 3-40-16-UDV

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm Hedpfx Amjiq U A Seyjr ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary Hedpfx Aodxz Tpjmysr • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: excellent (used), Year of construction: 2009, Machine Data: Panhans S 45 All in One Year of manufacture: 2009 Cutting length: 4200 mm Cutting width (programmable pusher travel): 4200 mm Angle stop on the left Roller tracks: 9 pieces, first 3 are dual-lane Clamping grippers: 8 pieces Air cushion tables: 4 pieces Central blower: 1 unit Technical Data: Saw blade protrusion: 70 mm, at 45°: 50 mm Saw carriage feed rate: forward 1-120 m/min, reverse constant 120 m/min Programmable pusher speed: forward 0-80 m/min, reverse 100 m/min Automatic cutting height adjustment; pressure bar height control Angle alignment device: min. alignment width 0 mm; max. alignment width full cutting length Hodpoyhnmgefx Amyjr Main saw motor: 14 kW, main saw 350 mm diameter Scoring saw motor: 1.5 kW, saw 180 mm diameter Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load: 20 kW Total weight: 6200 kg Control: VISIOLINE with PIOS Professional V2.0.0.x Labelling package incl. label printer

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, volume flow: 15,000 m³/h, filter area: 135 m², total height: 8,300 mm, total width: 2,400 mm, Equipment: CE marking, Scheuch LIGNO SLICB 10/6 – C filter system with heat recovery Year of manufacture: 2018 with patented impulse cleaning system Filter housing + hopper lower section 60 filter tubes, Ø 160 mm Hodszf I Dxjpfx Amyor Tube length 4500 mm Filter area 135 m² Volume flow rate approx. 15,000 m³/h 3 extraction fans - 7.5 kW, 4 kW, 1.5 kW 1 chip transport fan to the silo, 7.5 kW Including heat recovery Electrical cabinet with touch screen ATEX certified Fire and explosion protection Fire protection damper Hopper discharge with attached rotary valve – motor 0.75 kW With rotary airlock, drive 1.5 kW, throughput volume 7.00 m³/h Access ladder with operating platform Compressed air connection 5.5 bar Fire extinguishing line piping Dimensions approx.: 2400 x 2000 x 7900 mm Hopper height – 2350 mm Housing height – 4200 mm Filter head – 750 mm (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Hsdpfx Aoywd I Tsmyor Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2026 Dowel insertion machine with a pistol grip for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. • Consistent dowel insertion depth • Always consistent and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easiest cleaning of the gluing system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by the Auto-DL selector • Dowels are not driven in based on force; the dowel insertion depth is set independently of the bore hole depth • Recoil-free, extremely lightweight, and comfortable glue-dowel insertion pistol Hodpfx Amjvxgm Nsysr • Significant time savings compared to using a glue bottle and hammer

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. Hodozddwgopfx Amyor • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: excellent (used), Extraction installation Termoaspira 70M Power 7.5 kW Pneumatic filter bag cleaning system Hjdoyh T Sxspfx Amyer Air return to the hall Auger for chip removal Rotary airlock valve

Condition: excellent (used), Fan motor 15 kW Inlet 35 cm, outlet 35 cm Fan motor 3 kW, inlet 20 cm, outlet 20 cm Height 520 cm Width 200 cm Length 240 cm Hot air return pipe Hodpex N Scvsfx Amyor Length 570 cm, width 55 cm, outlet 80 cm 3 pipes with magnets

Condition: used, Year of construction: 2008, used, good condition with automatic length measuring device Manufacturer: Ayen Type: Magnum 8/10 V Year of manufacture: 2008 Hodpfxsy A Tbgs Amyer Machine No.: 0826788 Glue tank: 1.4 ltr. Dowel diameter: 8 x 10 mm Dowel length: 30-45 mm with glue indicator CE type-tested Glue gun mobile Space requirement approx. 480 x 480 x 900 mm Weight approx. 71 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition without warranty or guarantee