Used Okuma Mx 50 Hb for sale (185)

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Kjdpfji Eca Sjx Ah Nsdg

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 5585 mm Measurements depth 3080 mm Measurements height 3280 mm Machine weight 21000 kg Control Unit Model OSP-E100M Brand OKUMA Main Drive Spindle speed range 20000 rpm Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 900 mm Z-Axis Movement 980 mm Media Internal cooling Yes This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us. Application Types Kjdpfx Ahex D Ib Is Njdg Milling

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP E-100M Main Drive Number of axis 4 Additional Equipment Kjdpfx Ahsx D Nlzj Nedg Balluf read/write Renishaw MP10 30 Bar coolant Mayfran Consept 2000 This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4710 mm Measurements depth 2700 mm Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50 to 15000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Kdedpfx Aox D Rrish Nog Table Table load 500 kg Tools Max weight 10 kg Max tool diameter 70 / 150 mm Max tool length 300–450 mm This 4-axis Okuma MB 5000H was manufactured in 2011. It features a robust horizontal machining center design with a 500 × 500 mm pallet size, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min⁻¹ with a SK40 taper, enhancing its versatility. Additional features include a chip conveyor, shower system, and provision for a Renishaw probe. If you are looking to get high-quality milling capabilities consider the Okuma MB 5000H machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50–15,000 Tool taper SK40 Number of axis 4 Ksdpsx D Rrcefx Ah Nedg Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Tools Max weight 10 kg Max tool diameter 70 mm / 150 mm Max tool length 300–450 mm Type of tool holder BT40 This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1067, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 28 kVA, torque: 80 Nm, controller manufacturer: Okuma, controller model: OSP-U100L, workpiece height (max.): 500 mm, workpiece weight (max.): 700 kg, table width: 560 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 15,000 h, coolant supply: 20 bar, spindle nose: BT-40, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, 3-axis machining center with internal cooling through the spindle, 15,000 rpm, permanent oil cooling of the spindle. Various tool holders (collets, drill chucks, Weldon holders, and milling head holders). 3 Gressel-Gripos 125 mm vises as new, additionally tool presetting device PWB Toolmaster 250. Kdedpfx Ajw S Nc Rjh Neg

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as per photo, used, normal signs of wear, 100% functional Kdedpfx Aji D Naaoh Njg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Kodpfx Ahju U E Avj Nedg Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 760 mm Z-axis travel: 760 mm Spindle center to table surface: 50 to 810 mm Spindle end to table center: 135 to 895 mm Table size: 500 x 500 mm Max. load capacity: 500 kg Index positions: 360 Speed range: 50 to 15,000 rpm Number of speed ranges: stepless Taper: NT No. 40 Spindle diameter: 70 mm Feed Kjdpfx Ahjxvq Hdj Nodg Rapid traverse (X/Y/Z): 60,000 mm/min Manual feed (X/Y/Z): 1 to 60,000 mm/min Tool changer Tool holder: Standard MAS BT40 Magazine capacity: 48 stations Max. tool diameter (adjacent positions occupied): 70 mm Max. tool diameter (adjacent positions free): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Total power requirement: 43 kW Dimensions & Weight Space requirement: 2.7 x 4.73 x 2.87 m Machine weight: 11.5 t

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Distance from spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Kdjdpexyiq Nofx Ah Nsg Spindle taper: HSK Rapid traverse & feed rate Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Signal tower (3-stage) Foundation pads Clamping bolts

Condition: excellent (used), functionality: fully functional, Machine type: CNC Turning-Milling Center Manufacturer: Okuma Model: Multus U4000 2SC 1500 Year of Commissioning: 2017 (as ex-stock machine) Control: OSP P300S Spindle Hours: approx. 3,000 Included: Various tools and chuck jaws Condition: Very good Delivery: Short lead time – as agreed Equipment and technical details: ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range: 3,000 rpm Bore diameter: Ø 112 mm Motor power: 32 kW Torque: 955 Nm ▪ Hollow power chuck cylinder Ø 127mm, SMW VNK 320-127 with Ø 127 mm bore ▪ Pressure reducing valve, adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1,500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additional lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinge belt chip conveyor: Heavy-duty chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean fluid tank 980 L Kodpexw Thmsfx Ah Nsdg ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for lower turret) ▪ Door automation ▪ Robot interface Type E for connecting additional loading/unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Main drive (Okuma motor spindle): 22kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations ZB-axis with cylindrical roller guide XB-axis with slideways ▪ Real-time Collision Avoidance System (CAS) ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical display and adjustable tilt keyboard ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360°, 0.001° positioning ▪ Y-axis travel +150 mm / -150 mm = 300 mm ▪ B-axis 240°, 0.001° positioning ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20 bar pressure Including bag filter, external cooling of tool spindle, pump with max. 3 bar pressure ▪ Tool system: HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (using standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Part program memory 2 GB ▪ Max. length of individual part program: 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transmission ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction on Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high speed control for rotary tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation +/- 0.1° Optional: ▪ Transport organization and implementation ▪ Machine installation and setup ▪ Commissioning of the machine

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,204 h, functionality: fully functional, turning length: 1,025 mm, turning diameter: 530 mm, travel distance X-axis: 475 mm, travel distance Z-axis: 1,170 mm, quill stroke: 150 mm, controller model: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centers: 1,000 mm Swing over bed: 550 mm Maximum machining diameter: 530 mm Maximum workpiece length: 1,025 mm Travels X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main spindle Spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Taper bore diameter: 62 mm Bearing diameter: 100 mm Sub spindle Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Taper bore diameter: 43 mm Bearing diameter: 80 mm Milling spindle Speed range: 6,000 rpm Feed rates Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Automatic Tool Changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Kodpfoxvzp Ajx Ah Nedg Maximum tool diameter: Ø120 mm (with adjacent stations empty) Maximum tool weight: 5 kg MACHINE DETAILS Control: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Main switch-on hours: 20,204 h EQUIPMENT Automatic tool change system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision sub spindle for second machining side Stable turret with ATC system

Condition: used, Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100M, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 60, Okuma MB 500H horizontal machining center with 2-station pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical specifications: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant supply: 70 bar Travel paths: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500 x 500 mm Accessories: - Mayfran ConSep 2000 coolant system - Mayfran ConSep chip conveyor - Tool breakage monitoring in the magazine Kjdpfx Aswf E D Eeh Nedg - Workpiece coolant shower

Condition: used, Year of construction: 2004, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-E100M, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, table height: 630 mm, spindle speed (min.): 12,000 rpm, power: 37 kW (50.31 HP), Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 Kjdpfx Aoxnkvioh Nodg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  Kedsurfz Iepfx Ah Nodg 2.000 mm distance between spindles  Spindle speed 3.500 rpm  Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073  

Condition: ready for operation (used), Year of construction: 2017, turning length: 3,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 1,500 rpm, chuck outer diameter: 375 mm, Multitasking Machine OKUMA MULTUS B750 C3000 YEAR2017 Kjdpewi Ezrofx Ah Nodg OSP-P300SA 15" chuck Max Machining dia:1050mm Length:3000mm

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Kedpfertrlzsx Ah Nodg Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS x-way: 720 mm y-way: 630 mm z-way: 630 mm control: OKUMA OSP 7000 pallet size: 500 x 500 mm spindle speed: 10 - 5000 rpm tool holder: 10-fold pallet station tool holder: MAS BT 50 tool places: 200 pieces EQUIPMENT Kedpfjk R Tp Uox Ah Njdg - tool breakage probe - Renishaw probe - High pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is not shown in the pictures but in the description text.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 525 mm, workpiece weight (max.): 680 kg, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 525 mm Table Load capacity: 680 kg Clamping area: 1,200 mm x 510 mm Kdodpfx Ahswtrbao Nog Tool changer Magazine positions: 20 EQUIPMENT - Chip conveyor

Condition: excellent (used), Year of construction: 2019, operating hours: 2,044 h, functionality: fully functional, machine/vehicle number: 223697, turning length: 950 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, rotational speed (max.): 5,000 rpm, Machine with Big-Bore Spindle TECHNICAL DETAILS Spindle speed: 45 to 4,200 rpm Spindle motor: 30/22 kW Spindle mount: JIS A2-8 Spindle bore: ø91 mm Axes and Travel Turning length: 950 mm Turning diameter: 340 mm C-axis control: 360° at 0.001° increments X-axis travel: 260 mm Y-axis travel: 120 mm; +70 mm / −50 mm Z-axis travel: 1,010 mm Tool Turret Turret type: V12, radial, for L and M tools Tool holder mount: VDI Speed: 45 to 6,000 rpm Rotary tool motor: VAC 7.1/4.1 kW Control CNC control: OSP-P300LA with 15" touch panel Pitch error compensation: X-/Y-/Z-axes Workpiece ejection detection: available Smart Interface: included API Library 2: activated Virus Protection System - OSP-VPS: available Software Functions One Touch IGF Advanced M-E Kit: standard Optional IGF Advanced M-D Kit: available Multitasking coordinate conversion: available Profile generation: available Cycle time inspection and reduction: available Hi-Cut Pro: available Load monitoring, spindle & feed axes: available NC operation monitoring: available Spindle speed control: variable Y-axis turning: available Helical milling for MY machine: X/Y surface, Y/Z surface Cooling and Lubrication Coolant pump: 0.25 kW Coolant tank: L-type, replacing I-type High-pressure coolant pump: 0.8 kW Lubrication monitoring: A-1 incl. hydraulic pressure monitoring Dimensions and Construction CE marking and EMC: available IEC standard compliance: available Power supply CE-compliant: adapted to local standards Guideway extension for steady rests: available TAS-C: available Chip and Coolant Management Kjdpfx Aownqdijh Nedg Chip tray: side extraction Chip conveyor H-type: side, CE-compliant Fully enclosed with coolant protection: available MACHINE DETAILS Height: 2,444 mm Footprint: 3,420 x 2,041 mm Weight: 6,600 kg

Year of construction: 2001, condition: good (used), CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Kjdpfx Aok Hz Iwsh Nedg Coolant system and chip conveyor

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Reference: LT-2501 Manufacturer: Okuma Model: LB4000EX-MC x 750 CNC Control: Okuma OSP-P200L Year of Manufacture: 2007 Keyboard/Software Language: International / Spanish Country of Origin: Japan Technical Specifications: Capacity: Maximum swing over bed: Ø 670 mm Maximum swing over carriage: Ø 480 mm Distance between centers: 770 mm Maximum turning diameter: Ø 430 mm Maximum turning length: 750 mm Maximum bar capacity: Ø 90 mm (requires modification) Main Spindle: Spindle diameter: Ø 160 mm Spindle nose (type): JIS A2-11 Spindle bore: Ø 112 mm Speed ranges: 2, infinitely variable Spindle speed: 30 – 3,000 rpm Motor: 37 / 30 kW (30 min / continuous) Motor type: PREX Motor Tailstock: Rotating center: MT 5 Travel (W axis): 780 mm Rapid traverse: 12,000 mm/min Ksdpfx Asw Dvb Sjh Nsdg Maximum thrust: 7,500 N Z Axis: Travel: 840 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min X Axis: Travel: 300 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse: 25,000 mm/min C Axis: Controlled angle: 360° (0.001° increment) Turret: Type: M-V12 NC Number of tool stations: 12 x BMT40 (L or M) Indexing speed: 0.2 sec/position Tool Dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Driven Tool: Speed: 45 – 6,000 rpm Number of speed ranges: 1, infinitely variable Motor: 7.5 / 4.3 kW (25 min / continuous) Motor type: PREX Motor Dimensions and Weight: Machine height: 1,955 mm Floor space required: 3,050 x 1,900 mm Machine weight: 6,300 kg Included Options: SCHUNK ROTA THW plus 315-104 quick-change chuck (3 jaws, Ø 315 mm) CROMAR chip conveyor Assisted programming (ONE Touch IGF Advanced) Rigid tapping DNC-T1

Year of construction: 2005, condition: ready for operation (used), A CNC 4-axis lathe Okuma including a conventional external cylindrical grinding machine TOS BUAJ 28 is available. 1) Lathe, year of manufacture: 2005, turret: 2-disc turret, tool positions: 12/8, tool holder: VDI40, speed: 3800rpm, turning diameter: 370mm/530mm, turning length: 600mm, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2200mm, weight: approx. 6800kg, control: Okuma OST E100L. Includes clamping device design, part catcher, part conveyor, and chip conveyor. Without tailstock, bar loader, spindle reduction, and VDI holders. 2) TOS, year of manufacture: 1988, max. grinding diameter: 280mm, center height: 140mm, distance between centers: 630mm, max. workpiece weight: 120kg, headstock: MT4, workpiece spindle swivel range: +/-90°, grinding head swivel range: +/-45°, grinding wheel dimensions X/Y/Z: 400mm/40mm/127mm, speed: 2560rpm, feed rate: 7m/min. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/1500mm, weight: approx. 2000kg. Includes accessories and grinding wheels. Documentation available. An on-site inspection is possible. Ksdpfow Rqwyox Ah Nodg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 62,500 h, functionality: fully functional, Control: OSP100L Year of manufacture: 2005 Operating hours: 62,477 h Spindle hours: 8,169 h Number of spindles: 2 C-axis on main and sub spindle Number of turrets: 1 Milling spindle: 1 Kdodpowww Imofx Ah Njg Turret stations: 12-position, VDI40 Y-axis Tool holders on milling spindle: HSK63 Tool magazine: 40-position Chuck on main and sub spindle Tool package: 30x HSK holders, 6 pcs VDI 40 holders Parts feeder with safety fence and 40 tool holders

Condition: good (used), Parts shown by hand not come. Kdjdjyb R Erspfx Ah Nsg