Used Schaublin 102 for sale (55)

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz Iiodpfsw Iq Umjx Affok - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: used, functionality: fully functional, Schaublin 102 VM Iijdpfx Aoxq D Nuoffsk A total of 8 units will be in stock The price is per unit

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small-sized Swiss precision manual lathe, 102mm center height, 400mm center distance, 20mm spindle hole. Iiedpswqxcxsfx Affek 2 similar machines available (one with short bed and quick tooling and the other with long bed and gear head); already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] Iijdpfsw Ihttex Affok WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Iedpfx Afewbi Hpsfoik Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Thread cutting Largest pitch with standard change gear set 4 mm Machine plate for 20 metric pitches 0.25 - 4 mm Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Iodpebxkl Tsfx Affsik Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Lathe on box base, approx. 550 kg

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Iiedpfx Ajcug H Soffsk Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Iedpfxocpznhs Affsik Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Iisdsd Htvdjpfx Affok Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Iedpfxjcuhvuo Affoik Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: used, Schaublin 102-N80 Swiss precision lathe Technical details: Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Iiodpfx Afjxxavgsfsk Weight: approx 550 kg Accessories/options: - 3-jaw chuck with jaws - 4-jaw chuck with jaws - tool holders - Schaublin collets from 0,5mm Under power in our warehouse.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 312560, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Iiodpfx Afodr R Tcefsk Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory Nr.2210049, machine equipped with : 1 Bed 105-11 1 headstock 105-26 1 cross carriage 102-45 1 tailstock 105-65 1 motor Voegtle 380V/50Hz/3ph. ; 750-3000 min-1. ; 0,4/0,9 kW 1 set of 40 collets W20, Ø 0,5 to 20 per 0,5 mm. 1 turret Tripan 111S 2 tool-holder Tripan 131 1 tool-holder Tripan 132 1 hollow center W20

Condition: excellent (used), functionality: fully functional, Any accessories can be discussed on site Ijdpfx Afev Natwjfoik

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 Iodpowvq Tmefx Affjik >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Iisdpow N Rh Ajfx Affok Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with NEW 3-axis Digital Readout K&C and Accessory Cabinet in Excellent Condition!!! Technical Data: >> Machine No. 252409 >> Center Height: 135 mm >> Distance Between Centers: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Threads: 0.25–14 mm >> Tailstock: Morse Taper MK3 >> Infinitely Variable Spindle Speeds: 55–3000 rpm >> Total Power Requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> K&C 3-axis digital readout, new, with 12 month manufacturer’s warranty and operating manual Functions: metric/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> Accessory cabinet including: – Multiple 3-jaw chucks with several sets of jaws – Multifix size A with toolholders – Internal and external collets with quick-clamping device – Change gears – 4-jaw chuck – Faceplate – Fixed and travelling steadies – Coolant system – Centers Ijdpfx Afex I Nkujfjik – Operating manual – Turning tools and much more About the machine: Offered here is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university setting and has seen very little use. Equipped with a new 3-axis digital readout from K&C and a wide range of accessories. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Condition: used, Technical specifications: X-axis travel: 700 mm Iiedpfoxtnn Tex Affek Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Condition: refurbished (used), Year of construction: 2004, machine/vehicle number: 350735, Manufacturing origin Swiss Voltage 380/50/3 Netweight 1570 kg Custom position 8458.1120 Dimensions 1830x1260x1700 mm TECHNICAL DATA Capacities Max. turning diameter Ø 270 mm Max. swing over carriage Ø 115 mm Centre height over carriage 60 mm Turning length B32 265 mm Headstock A2-4 Spindle for Schaublin collets W20 / W25 / F38 / B32 Spindle speed, continuous 50 - 5'000 min-1 Spindle inner diameter (without chuck key) 39 mm Max. bar passage in collet W20 14,5 mm Max. bar passage in automatic chuck 32 mm Max. recommended turning diameter 200 mm Pneumatic clamping Adjustable axial clamping force, force at 5 bar 1'150 daN Cross slide Cross travel, X axis 180 mm Resolution, X-axis (at radius) 0,0005 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 20 x 5 mm Longitudinal travel, Z axis 390 mm Resolution, Z axis 0.001 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 32 x 5 mm Feed rates Working feeds, X and Z axis, stepless 0 - 5 m/min Rapid feeds, X and Z axis 8 m/min Feed forces, X / Z axis, continuous 503 / 503 daN Tooling system: Revolver Standardised tool holder attachment VDI 20 Number of tool stations 8 Iisdpehr Rtnofx Affek Number of live tool stations 4 AC motor drive, continuous / intermittent 0.55 / 1.1 kW Spindle speed, stepless 30 - 5'000 min-1 Max. tool cross-section 16 x 16 mm Integrated coolant and indexing in both directions yes Cooling Tank capacity 55 L Pump capacity 10 L/min Pressure 1.7 bar Pneumatic tailstock Taper of the spindle sleeve Morse 3 Spindle outer diameter 45 mm Spindle stroke 70 mm Adjustable contact force 25 - 260 daN Tip height from ground 1'162 mm errors and omissions excepted data gived without obligation

Year of construction: 1998, operating hours: 1,339 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series 18i-T Main Drive Number of axis 4 Spindle Speed 4000 RPM Tool taper VDI 30 This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information. Application Types Turning Iijdpfxsx D Itwe Affok

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories Iiodpfx Afeu Eqixofek MARCELS MASCHINEN CH

Condition: used, total height: 1,700 mm, total width: 1,600 mm, total length: 1,800 mm, Empty weight: 1.650 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 550 - Z-axis travel [mm]: 430 - Table length [mm]: 1100 Isdpowni Akofx Affeik - Table width [mm]: 255 - Tool holder: ISO30 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - └ Type of digital readout: Sony - Transport dimensions: 1800mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres Ijdpex H Szysfx Affoik - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Customs tariff number: 8458.1120 Ijdpfx Afsw T Smhjfeik Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter admitted over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter admitted over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardized spindle nose, suitable for use with various collets and chucks using adaptation accessories. Collet accessories (SCHAUBLIN): B45/F48 Maximum bar capacity, diameter: 36 mm / 42 mm Automatic chuck, standard diameter: 170 mm Direct drive via AC motor, power at 100% / 50% duty: 15 / 18.5 kW Maximum torque at 100% / 50% duty: 135 / 165 Nm Maximum spindle speed: 5000 rpm C axis: Pneumatic clamping cylinder: 2700 daN Cross slide: Transverse travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Stepless working feeds, X/Z axes: 0–5000 mm/min Rapid traverse feeds, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 8 Standardized tool holder mounting: VDI 30 Max. tool shank size: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant system: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Unless otherwise specified, the above technical details are provided without commitment or liability.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High Precision Lathe with 3-Axis Digital Readout (ELESTA) and Accessory Cabinet in Excellent University Condition! Technical Data: - Centre Height: 135 mm - Distance Between Centres: 630 mm - Swing Over Bed: 315 mm - Spindle Nose: Camlock D1-4 - Spindle Bore: 40 mm - Longitudinal and Cross Feeds: 0.025–0.35 mm/rev - Metric Threads: 0.25–14 mm - Tailstock Taper: MK3 - Infinitely Variable Speeds: 55–3000 rpm - Total Power Requirement: 4.45 kW - Weight: approx. 1,200 kg Iedpfjx Hivnex Affjik Accessories: - 3-Axis Digital Readout (ELESTA) with Heidenhain Scales - Accessory Cabinet including: - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix B, 3 tool holders - Internal and external quick-change collet system - Change gears - Eccentric chuck - Faceplates - Fixed and travelling steadies - Coolant system - Centre points - Operating manual - And much more About the Machine: For sale is a Schaublin 135 high precision lathe. The machine is in very good condition, comes from a university, and has seen very little use. It is equipped with a 3-axis digital readout and a wide range of accessories. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm Iodsw Uc Npepfx Affoik - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.