Used Schaublin 102 Vm for sale (56)

Condition: used, functionality: fully functional, Schaublin 102 VM A total of 8 units will be in stock Podpfoxq D Nuex Adnjrd The price is per unit

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Thread cutting Largest pitch with standard change gear set 4 mm Machine plate for 20 metric pitches 0.25 - 4 mm Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Psdpfx Adobxkl Tsnord Lathe on box base, approx. 550 kg

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Prodocug H Sepfx Adned Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: Prodpjwvq Tmsfx Adnod For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Pjdpfew N Rh Ajx Adnerd Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: as good as new (ex-display), Schaublin lunette steady rest glasses 102VM Podpekw Drzofx Adnord

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops Podpfx Adew Iq Umsnerd - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: good (used), functionality: fully functional, Precision lathe, make SCHAUBLIN, type 102 N 80 No.: BL 280280 Technical data: Podpfxexpxuve Adnjrd Data: Center distance approx. 400 mm Center height 102 mm Spindle bore 26 mm Speeds see speed diagram Width x depth approx. 1.3 x 0.5 m Machine weight approx. 0.4 tonnes

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small-sized Swiss precision manual lathe, 102mm center height, 400mm center distance, 20mm spindle hole. 2 similar machines available (one with short bed and quick tooling and the other with long bed and gear head); already complete with electrical panel and safety devices; equipment and conditions as per photo. Psdpfx Adowqxcxonord

Condition: used, manufacture Schaublin Prsdpfjw A Ap Tex Adnsd In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] Prsdpow Ihttsfx Adnod - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: used, centre height 102 mm Prodpfx Adewbi Hpsnod centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock! Prodpfx Adjcpznhenjd

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Prjdpfx Aswqxcfsdnsd Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Pedpfxsd Htvdj Adnord Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Predpfxscuhvuo Adnsd Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: used, Schaublin 102-N80 Swiss precision lathe Podpjxxavgsfx Adnord Technical details: Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories/options: - 3-jaw chuck with jaws - 4-jaw chuck with jaws - tool holders - Schaublin collets from 0,5mm Under power in our warehouse.

Condition: excellent (used), functionality: fully functional, Any accessories can be discussed on site Pjdpfev Natwex Adnjrd

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speed 5,000 min-1 8-position turret Minimum quantity lubrication Prjdpfx Adjwh U Dtensd

Condition: good (used), Swing over bed 270 mm Center Height 125 mm Distance between centers 600 mm Psdpfstwpyaex Adnerd Spindle speeds 30-5000 rpm Control: FANUC 18i Manual Guide Misc. accessories MARCELS MASCHINEN CH

Condition: used, SCHAUBLIN 125 CCN is a CNC turning lathe of high precision, engineered for reliable machining with superior accuracy and repeatability. Working capacities: centre height 125 mm, distance between centres 500 mm, swing over cross-slide 115 mm, swing over bed 270 mm, spindle hole 28 mm; Z travel 400 mm, X travel 180 mm; spindle stroke 160 mm, spindle diameter 45 mm. Main specs: stepless spindle 0–5000 rpm, spindle power 7.5/5.5 kW, torque 58/42 Nm, Morse taper 3, feeds up to 5000 mm/min, rapid traverse 7.5 m/min; air 5–6 bar; 3x400 V 50 Hz; total power 15 kVA; weight ~1415 kg; dimensions 1700×1300×1700 mm. Accessories: 3-jaw chuck, soft/hard jaws, steady, set of collets, lamp, tailstock, coolant system, tool cabinet, steel holders, rinsing gun. Achieves tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace, medical. Psdpfxsxx Uzwj Adnerd

Condition: excellent (used), Year of construction: 1968, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Schaublin, lead screw and feed screw lathe type 135 -Machine bed: hardened -Turning length: 750 mm -Turn diameter over bed: 315 -Rotation diameter over recess: 355 mm -Turning diameter over support: 150 mm -Spindle bore: Ø 34 mm -Spindle speeds: 45 - 3000 rpm -Wedge bar chuck: Forkardt Ø 160 mm Pedpfsw Rd Hbsx Adnord -Tailstock mount: MK3 -Drive: 1.5/3.0 kW -Accessories: Drawer cabinet with 2x bezels, 28x Multifix tool holders, collets, see photos -Lathe dimensions: 960/1700/H1290 mm -Weight of lathe: 1230 kg -Cabinet dimensions: 480/725/H1000 mm -Weight of cabinet: 222 kg

Year of construction: 1998, operating hours: 1,339 h, condition: ready for operation (used), Control Unit Pjdoxv Ezcopfx Adnord Brand FANUC Model Series 18i-T Main Drive Number of axis 4 Spindle Speed 4000 RPM Tool taper VDI 30 This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 700 mm, feed length Y-axis: 490 mm, feed length Z-axis: 250 mm, Heidenhain Visue, 3 axes Prsdpjxxmpmefx Adned ISO 40 spindle Table 1100x305 mm Travels 700x490x250 mm 7.5 HP Weight 2100 kg

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Predpfx Adjxtnn Tjnjd Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg