Used Schaublin 110 for sale (45)

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Number of spindles : 2 MAIN SPINDLE - Spindle speeds : 30 - 6000 [rpm] - Spindle power : 5.5 [kW] - Max. bar diameter : 32 [mm] - Max. turning diameter : 115 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-4 Csdpfxszgx Abe Agrjhd TURRET 1 - Number of positions : 8 - Number of motorized positions : 8 - Live tools speed : 5000 [rpm] - Live tools power : 0.75 [kW] - X stroke : 220 [mm] - Z stroke : 300 [mm] - Rapid traverses rates (X/Z) : 6 / 10 [m/min] TURRET 2 - Number of positions : 6 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 16 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2830 x 2610 [mm] - Machine height : 1860 [mm] - Machine weight : 1600 [kg] EQUIPMENT - CNC : Fanuc 18-TB - Coolant tank - Parts catcher - Bar loader : IEMCA BOSS 332 E / 32 LL

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: BL 201273, Completely overhauled on a new workbench, with new paint and belt guard, and a new headstock. Cjdpfxe Ahxhie Agrshd Inventory No. 2240050, machine including: 1 NEW workbench 2000x800 mm with blue Urphen top 2000x800x50 mm      1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-20 tailstock with geared reducer, complete with tightening key, overhauled 1 overhauled cross slide 1 overhauled aligned steady rest 1 380V/50Hz/3ph motor, 2 speeds 720/1420 rpm - 0.9/0.6 HP 1 tensioner pulley with pulley and belt 1 W-20 dead center 1 set of 37 W20 collets 1 1x3 jaw chuck Ø 100 mm on W-20 flange and additional jaw sets 1 TRIPAN tool holder set including: -1 type 111S turret with stud - 2 tool holders 131 - 1 tool holder 131b - 1 double tool holder 132 1 self-centering drilling chuck, capacity 1-13 mm on CM2 taper 1 CM2 dead center TECHNICAL CHARACTERISTICS: Capacities: - center height 102 mm - distance between centers, W-type headstock, standard 470 mm - distance between centers, W headstock with reducer 375 mm - diameter allowed above the bed 200 mm - diameter allowed above the cross slide 120 mm Bench: - height x width x length 160x100x1000 mm cast iron bench with rectified dovetail profile Headstocks: - spindle nose for collets W-20 - bar passage through collet 14.5 mm - headstocks with reducer, ratio 1:5 Cross slides: - travel of longitudinal tool slide 90 mm - travel of transverse tool slide 100 mm - tool dimensions 12 x 12 mm Tailstocks: - internal taper of tailstock spindle Morse 2 - spindle travel, controlled by screw and handwheel 80 mm The technical specifications are provided without guarantee, subject to errors and omissions.

Condition: like new (used), Year of construction: 1994, operating hours: 606 h, functionality: fully functional, center height: 125 mm, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1-3, type of input current: three-phase, spindle speed (max.): 5,000 rpm, input current: 16 A, input frequency: 50 Hz, overall weight: 1,500 kg, # FOR SALE: SCHAUBLIN 125 CCN – FANUC 20T – LIKE NEW Very exclusive Schaublin 125 CCN CNC lathe in exceptionally good condition! For sale: a beautiful Schaublin 125 CCN, equipped with the reliable Fanuc 20T CNC control system. This high-quality Swiss precision lathe has only 600 operating hours and is in absolute like-new condition. The Schaublin 125 CCN is known for its exceptional accuracy, high-quality finish, and solid Swiss engineering. An ideal machine for precision machining, fine mechanical work, and toolmaking. ### Key Features - Brand: Schaublin - Type: 125 CCN - Control System: Fanuc 20T - Operating Hours: Only 600 hours - Condition: Like New - Origin: Swiss top quality Codpfxs Agfwie Agrshd - Type: CNC precision lathe ### Special Features A Schaublin 125 CCN with so few operating hours and in this condition is a rare find. A unique opportunity for enthusiasts or professionals looking for a high-quality precision lathe with minimal signs of wear. Seriously interested? Feel free to contact us for more information, photos, or to arrange a viewing. Price: upon request.

Condition: used, total height: 1,900 mm, total width: 160 mm, total length: 2,000 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Documentation available: Yes - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 5.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 490 - B-axis rotation [°]: 360 - C-axis rotation [°]: 270 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO40 - Main spindle power [kW]: 3 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1510 - Options: Chip collection tray, External cooling, Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2000mm x 165mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Csdpfxo Ahki Sj Agrjhd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), High-precision lathe Schaublin 102N-VM Technical data: >> Machine no. BL238823 >> Center height 102mm >> Distance between centers 450mm >> Spindle bore 25mm Chsdpfj Ahq I Hsx Agrjd >> Longitudinal feeds, 8 settings from 0.02-0.3mm/rev >> Metric threads, 20 pitches from 0.25 to 4mm >> English threads, 25 pitches from 80 to 6 threads/inch >> Tailstock MK2 >> Spindle speeds from 270-3000 rpm, stepless >> Weight approx. 700 kg Accessories: >> Steel tool holders, 3 pieces >> Quick-change tool post, draw tube, and collets >> Coolant system >> Change gears About the machine: A Schaublin 102VM lead screw lathe is offered for sale. All slides move smoothly and evenly. Even at high speeds, the 102VM runs quietly. The set of gears for thread cutting is included. Take advantage of the opportunity to inspect this machine on-site while it is powered up and to see for yourself its good condition.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 350100, spindle bore: 20 mm, turning diameter over bed slide: 200 mm, turning diameter over top slide: 120 mm, center height: 102 mm, feed length X-axis: 400 mm, quill travel distance: 90 mm, total length: 1,500 mm, total width: 510 mm, total height: 1,550 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 100 rpm, bed width: 130 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 100 rpm, type of input current: three-phase, overall weight: 660 kg, input voltage: 400 V, distance between centers: 450 mm, travel distance cross slide: 100 mm, Schaublin 102N-VM CF precision lathe in excellent condition, fully functional. The machine has undergone a geometric inspection (inspection report available). Chodpfx Agsz E Dymorsd Included equipment/accessories: - W20 collet set - 4-jaw chuck - Tripan tool turret with tool holder - 2 quick-change 6-jaw chucks - Drilling chuck - CCEA LED lamp - Gear set Machine available for viewing and testing at our premises in Switzerland. Price: CHF 29,900.– (excluding VAT) Loading and transport possible upon request.

Condition: good (used), functionality: fully functional, Reversal of direction of rotation, pneumatic collet chuck, collets. Csdpfx Aoz Sppbogrehd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 352016, Schaublin CNC lathe, type 140-CNC A2-4, in excellent condition. Specifications: - FANUC control 21i-TB Chodozub Agspfx Agrod - Maximum turning diameter over the bed: 300mm - Spindle speed: 50-6000 rpm - Maximum bore of the main spindle: 39mm - 12-position VDI turret with live tools - Machine dimensions: 2530x1400x1840mm - Weight: 3020kg Accessories: - Coolant system - Air filter system (mist collector) - 30 VDI 30 tool holders - 2 VDI 30 live tool holders - Various extras, see photos

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Cjdpfx Agoz E A Dwjrehd Original accessories and tools can be purchased separately. Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 375 mm Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Delivery possible by arrangement.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Schaublin 125-CCN High-precision lathe with numerical control FANUC 20-T. A LARGE AMOUNT of accessories included. CE compliant!!!! Technical data: >> Machine no. 334949, year of manufacture 1995 Chodpjz Ezc Eofx Agrjd Working area: Permissible diameter: over the carriage 270 mm over the slide 115 mm in the spindle bore 28 mm largest chuck 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X/Z axis, stepless 0-5000 mm/min Rapid traverse X/Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with numerical control FANUC 20-T. The machine was manufactured in 1995 and comes with a large amount of accessories. Take advantage of the opportunity to inspect this machine on site while it is powered up and to verify its condition.

Condition: good (used), functionality: fully functional, Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control – A LOT of accessories – CE compliant!!!! Technical data: >> Machine no. 334511, year of manufacture approx. 1995 Working area: Maximum diameter: Over the cross slide 270 mm Over the carriage 115 mm In the spindle bore 28 mm Cedpfx Agjz Ezc Sjrehd Largest chuck size 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X / Z axis, stepless 0-5000 mm/min Rapid traverse X / Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control. The machine was manufactured around 1995 and comes with a large number of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to verify its condition.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Cjdpfxezlc Apj Agrohd Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. We can overhaul a machine from you or deliver a machine from us. Chjdpofhnr Iefx Agred

Condition: excellent (used), Very good condition Digital, Multifix, collets W32 Chjdpfjy Al Uxox Agrjd

Condition: refurbished (used), For sale is a Swiss Schaublin 13 precision milling machine in fully refurbished condition—better than new. The machine has been completely overhauled in Switzerland. Its geometry has been reworked and the electrical system brought up to the latest standard. Chedpfx Aoyw A Hzjgrjd All guideways are finely scraped and in perfect condition. All wear parts and spindles have been replaced. Belts are renewed, etc. The machine has not been used since the overhaul. In this condition, it is an absolute rarity and already considered an investment piece. Ideal for high-precision applications or collectors who appreciate a perfect machine tool.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more Codpfx Asx H Szysgrshd About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: good (used), Technical specifications: * Over bed – 270 mm * Center height – 125 mm * Maximum distance between centers – 500 mm * Spindle bore – 28 mm * Collet type B32 * Longitudinal travel of the carriage – 440 mm * Cross travel – 130 mm Cedpfj Afu Injx Agrjhd * Travel of the small tool-holding carriage – 90 mm * Travel of the tailstock sleeve – 100 mm Equipment: * 3-jaw chuck, 125 mm diameter * Multifix A turret * 3 Multifix A tool holders * Quick-change tool system * 1 steady rest * 1 rear carriage

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Chsdpfx Agjw Uc Nperod Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information. Chjdpfxjyxgyhs Agred

Condition: excellent (used), For sale is a set of steady rests for a Schaublin 150 lathe. Very good condition. Includes a set of 3 roller jaws. Price is for the complete set. Shipping available or collection in 5023 Salzburg. Chjdpfxsy Rdaio Agrjd

Condition: excellent (used), Year of manufacture: 1973 Codpfx Agozyyn Sjrohd Distance between centers: 500 mm Distance between centers (vertical): 125 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 120 mm Spindle bore: 32 mm Spindle nose: Camlock D1-3 Spindle speed: 225 - 3000 rpm Tailstock quill: MK 2 Weight: approx. 930 kg Dimensions W x D x H: approx. 1473 × 730 × 1280 mm Condition: very good Accessories: see pictures Through hole in the chuck: 28 mm Collet system: Schaublin B32 Automatic feed: 4 - 260 mm/min Cuttable metric threads: 0.25 to 8 mm Cuttable inch threads: 112 to 3 threads per inch

Year of construction: 1987, condition: used, Schaublin 102N lathe Chodpfjzlugyjx Agrjd

Condition: good (used), Lathe SCHAUBLIN 102N80, serial number 277444. Chedpeztc Dvsfx Agrjd

Condition: excellent (used), With DRO With step-down gear for spindle speeds Chsdpfx Ajy Iz Ixjgrod Center height150 mm Distance between centers 630 mm Turning diameter over bed 340 mm Spindlespeeds 55-3000 rpm Spindle bore 40 mm Pitch of leading screw 4 mm Tail stock MK5 Misc.accessories MARCELS MASCHINEN CH

Condition: used, TECHNICAL DETAILS Codsw Ihttopfx Agrjhd - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]