Used Schaublin 102 N for sale (60)

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] Bodpfew Ihttox Adroli - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: good (used), Schaublin 102 N, machine number BL 329218, year of manufacture approx. 1998, center height 102 mm, center distance 375 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, spindle speed up to 2,800 rpm, tailstock, accessories, Blsdpjy Hip Iofx Adrsi

Condition: good (used), Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Bledpsy Hin Rsfx Adrsi Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Bledpfswbi Hpox Adrei Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Bljdpocpznhsfx Adrji Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Blsdpfxocuhvus Adroi Different "Schaublin 102" models in stock!

Condition: excellent (used), functionality: fully functional, Schaublin 102N precision lathe. Benchtop model. In good condition, fully functional. Distance between centers: 450 mm Center height: 102 mm Spindle: W20 Swinging diameter over cross slide: 120 mm and over bed: 200 mm Tailstock quill: MK2 Bsdoziq Dpspfx Adrjli Connection: 50 Hz, 3 x 380 volts.

Condition: used, Needs some attention and a new fan belt, otherwise it's in good condition. Bodpfx Adszicgisroli Accessories are shown in the photo.

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 102 mm DISTANCE BETWEEN CENTRES: 450 mm MAX TURNING DIAMETER OVER BED: 200 mm MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm Bodeyvlxqjpfx Adrjli

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: Blsdsdr R Tcspfx Adrji 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] Blsdpfx Adow N Rh Ajrei - Tailstock - etc... Under power in our warehouse.

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself. Bsdpfswvq Tmsx Adroli

Year of construction: 1987, condition: used, Schaublin 102N lathe with various tools Bjdpfxsyhyt Aj Adroli

Condition: used, Schaublin 102 VM Bljdpfx Adozicwbsrsi We have a total of 5 units in stock. The price is 2000 Euros per unit. See photo.

Condition: used, Year of construction: 2009, functionality: fully functional, Turning machine with carriage and tooling. Bodpfx Adozg Hk Torsli

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Bedpfoy N N N Tox Adroli

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bed length overall from headstock: 635 mm Swing over bed: 200 mm Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm Bodsy Dvf Rspfx Adreli - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Bodpfxjw Iq Umo Adrsli Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Bodpscug H Sjfx Adrsli Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp Bledpfxjd Htvde Adroi 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 90 mm, spindle motor power: 1,500 W, total height: 1,370 mm, total width: 800 mm, overall weight: 360 kg, product length (max.): 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details. • Headstock: Integrated motor • Mounting: Mounted on workbench (Version CE) • Cross-slide: Crank cross-slide with digital measurement device • Tailstock: Morse Taper 2 Additional equipment • Workbench: 2000 x 800 x 900 mm • Lista drawer cabinet: 564 x 725 x 850 mm • Pneumatic clamping device W25 with graphite distributor • Tripan-111S quick-change tool holder system • Boring bar holder, 30° angled, max Ø12 mm • 3-jaw chuck W25/Ø100 (cast iron, manual) • Tailstock accessory: Rotating center 60°, Ø18 mm (Gepy) • Collet set W25 (0.5–25 mm, 50 pieces) • Mebiflex 70 lamp • Max. Permissible Diameter Over Bed: 200 mm • Max. Permissible Diameter Over Carriage (Cross Slide): 120 mm (60 mm with rear support) • Center Height Over Bed: 102 mm • Center Height Over Carriage: 20 mm • Max. Center Distance: 470 mm • Bed Length: 1,000 mm • Bed Height: 168 mm • Main Spindle Drive: AC Motor, 1.5 kW (Continuous operation) • Spindle Type Options: W20 / W25 • Spindle Speed (Infinitely Variable): 100 - 6,000 rpm (min⁻¹) • Spindle Internal Diameter: 20 mm (W20) / 25 mm (W25) • Max. Bar Capacity: 14.5 mm (W20) / 19 mm (W25) • Carriage Travel (Manual) on Bed: 442 mm • Cross Travel (X-axis): 100 mm • X-axis Resolution (Radius): 0.001 mm (digital) • Longitudinal Travel (Z-axis): 90 mm (Optional: 150 mm for orientable upper slide) • Z-axis Resolution: 0.001 mm (digital) • Trapezoidal Screw Spindle: Ø 9 x 2 mm pitch • Max. Tool Shank Cross-Section: 16 x 16 mm (Multifix-System) / 12 x 12 mm (Tripan-System) • Tool Holder Diameter: 20 mm (Multifix-System) / 12 mm (Tripan-System) • Standard Tailstock: Morse 2 internal taper, 30 mm spindle outer diameter, 80 mm stroke • Lever-operated Tailstock (Optional): W20/W25 internal taper, 40 mm spindle outer diameter, 100 mm stroke • Starwheel-operated Tailstock (Optional): W20/W25 internal taper, 40 mm spindle outer diameter, 150 mm stroke Bljdpfjy Snmvjx Adrei • Quick-clamping Lever System (Optional): Max spindle speed 3,000 rpm • Pneumatic Clamping System (Optional): Adjustable axial clamping force, 500 daN at 5 bar, Max spindle speed 6,000 rpm • Spindle Lock: Pneumatically operated spindle lock, locking torque 48 Nm at 5 bar (Max speed 3,000 rpm) • Steady Rests (Optional): Clearance, stationary steady rest, Ø 0.01 to 40 mm • Electrical Connection: 400V, 50/60 Hz, Nominal Current 12A (Max 20A input fuse), +/- 5% allowable voltage fluctuations • Power Consumption: 1.8 kVA • Noise Level under Load at Operator Station: < 60 dBA • Operating Temperature: +15°C to +30°C (+5°C to +40°C for digital measuring devices) • Relative Humidity: 5% to 80% • Digital Measuring Unit Battery: 1x Lithium 3V, Type CR 2032 (Current consumption: 45 µA, Lifespan: 5,000 hours continuous operation) • Floor Loading: 263 kg/m² • Floor Payload Capacity: 113 kg/m² Technical Specification Counter Spindle No Driven Tools No

Condition: used, TECHNICAL DETAILS - max. diameter over bed : 270 [mm] - max diameter over slide : 130 [mm] - distance between centers : 440 [mm] - spindle nose : CAMLOCK D1-3' - max bar diameter : 28 [mm] Bedpfeuhcarox Adrjli - power : 7.5 [kW] - spindle speed : 0-5000 [rpm] with variator - strokes X x Z : 180 x 400 [mm] - work feeds : 0-5000 [mm/min] with variator - quick feeds : 7500 [mm/min] - supply : tri 380V 50Hz 14kW - size : 1700 x 1226 x 1660 [mm] - weight : 1415 [kg] EQUIPMENT - numerical control FANUC 20-T - quick change turret Multifix 'A' - collets chuck SCHAUBLIN B32 - tail stock with capstan - coolant tank with pump

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Number of spindles : 2 MAIN SPINDLE - Spindle speeds : 30 - 6000 [rpm] - Spindle power : 5.5 [kW] - Max. bar diameter : 32 [mm] - Max. turning diameter : 115 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-4 TURRET 1 - Number of positions : 8 - Number of motorized positions : 8 Bsdpfxjzgx Abo Adroli - Live tools speed : 5000 [rpm] - Live tools power : 0.75 [kW] - X stroke : 220 [mm] - Z stroke : 300 [mm] - Rapid traverses rates (X/Z) : 6 / 10 [m/min] TURRET 2 - Number of positions : 6 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 16 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2830 x 2610 [mm] - Machine height : 1860 [mm] - Machine weight : 1600 [kg] EQUIPMENT - CNC : Fanuc 18-TB - Coolant tank - Parts catcher - Bar loader : IEMCA BOSS 332 E / 32 LL

Condition: good (used), Year of construction: 1996, operating hours: 7,352 h, functionality: fully functional, Max. turning length: 500 mm Max. diameter over the bed: 270 mm Max. diameter over the carriage: 130 mm Max. bar diameter: 28 mm Power: 15 kW Spindle speed: 0-5000 [rpm] with variable speed drive X x Z travel: 180 x 400 mm Power supply: 380 V 50 Hz 15 kW Dimensions: 1700 x 1226 x 1660 mm Weight: 1415 kg The delivery includes tool holders, collets, and other tooling accessories as shown in the pictures. Blsdpfezgf U Rox Adrji

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system Bedpfx Aozb U Epsdroli OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.