Used Nuclear Power Oil-Press for sale (49,855)

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Podpfju Rnziex Aalopl Mains frequency: 50 Hz The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Power (PS) 16.0 bar Ppjdpfx Aaext D Eujlol Continuously adjustable Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel casters with parking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Ppedsc Rt D Nopfx Aaljl Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Psdpopvlf Ssfx Aalspl Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: new, Atlas Copco ROTO Synthetic Fluid FOODGRADE 20 liter container Also available in 5 liter containers From stock sale Pedpfx Aaevkf A Hjljpl We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: used, Prägepresse / Hot Foil Stamping Press Podot Drnxopfx Aalspl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, BURKLE MULTIFOILER Press Model M8 + STOLMAT Spray Booth Wall Machine for covering flat and formed MDF furniture components with thermoplastic foils. Basic machine data: Podpfx Aowfz Nkjalepl • Electrical connection power: approx. 28 kW (without optional components), • Operating voltage: 400 V, 50 Hz, 3-phase, • Control voltage: 24 VDC, • Required air pressure: min. 6 bar, • Air connection diameter: min. 1 inch, • Required air volume: max. 2880 l/min, • Air consumption during pressing process: ◦ 4 bar forming pressure: approx. 720 l/cycle, ◦ Chamber filled to 50%: approx. 360 l/cycle. Operating side: in the direction of feed, right-hand side. Electrical equipment: • In compliance with DIN/VDE (EN 60204) standards, • Electrical documentation according to VDE, • Paint color: machine and control cabinet RAL 7035 light grey, decorative elements RAL 5002 blue. Working materials: • Material applied: ◦ PVC foils 0.30–1.0 mm, ◦ High gloss foils 0.50–1.0 mm, ◦ PET foils 0.35–0.60 mm. • Material processed: ◦ MDF board (smooth or profiled surface), ◦ Board temperature: approx. +18°C, ◦ Board moisture content: approx. 6–8%, ◦ Board density: approx. 750 kg/m³. Technology: • Thermal forming without membrane, • Working area: 1330 x 2430 mm, • Maximum workpiece size: 1250 x 2350 mm, • Minimum foil width: 1400 mm, • Workpiece thickness: 6–35 mm (depending on part geometry). STOLMAT Spray Booth Wall 1. Purpose of the device: • Wall for extracting paint dust and vapors. • For capturing dust generated during spray application of paints and lacquers onto furniture components. • Designed for use with high-efficiency spraying equipment (spray gun). • Filtration efficiency >96%, eliminating the need to clean exhaust ventilation ducts. • Equipped with side covers ("tapacze") to improve extraction efficiency. 2. Technical data: • Dimensions (LxWxH): 2500 x 2130 x 700 mm, • Fan type: duct fan 500, • Fan capacity: max 7500 m³/h, • Max pressure: 400 Pa, • Fan motor power: 1.85 kW, • Voltage: 230/400 V, • Number of fans: 1 unit, • Filtration surface (1st stage – cardboard filter): 4.80 m², • Filtration surface (2nd stage – PS fiber filter): 2.50 m², • Dust filtration efficiency: >96%. 3. Technical description: • The spray extraction wall is made of galvanized steel sheet, 1.5 mm thick. • Wall elements are connected by screwing and sealed with acrylic mass. • The fan is mounted on a wall bracket. • Side covers ("tapacze") made of galvanized steel sheet. 4. Dust filtration parameters: • Cardboard filter (labyrinth type): ◦ Class G3 (DIN 53438, EN 779), ◦ Thickness: 60 mm, ◦ Flow rate: 1200–3800 m³/h/m², ◦ Filtration efficiency: 90–98%. • PAINT STOP filter: ◦ Flow rate: 2500–6300 m³/h/m², ◦ Filtration efficiency: 93–97%.

Year of construction: 2011, condition: excellent (used), CONTEC-COMPRESSORS POWER SCREW COMPRESSOR SYSTEM PS 2037 PM, WITH INFINITELY VARIABLE SPEED CONTROL (INVERTER) ENGINE 37 KW, Efficiency of 5 m3/min, 10 BAR PRESSURE. YEAR 2011. TECHNICAL CONDITION IN WORKING ORDER. START-UP GUARANTEE. Ppedpsfdl H Tofx Aalsl NET PRICE 13000,- GROSS PRICE 15990,- S0048 MORE COMPRESSORS, DRYERS ON SALE AND WELDING EQUIPMENT. WE SERVICE AND REPAIR COMPRESSORS OF THE STRUCTORS. RATY! CONTEC-COMPRESSORS

Year of construction: 2023, condition: as good as new (ex-display), Exhibit, immediately available: new RENNER SCROLL SL-I 4.5 (10 bar) oil-free compressor with RENNERtronic Touch control with star-delta Year of construction: 2023 Operating hours: 1 hr The compressor is in stock and available immediately Ppjdpfx Aaelnlrzelsl Pressure: 10 bars Rated power: 4.50 kW Delivery quantity: 405 l/min Sound level: 68 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 760 x 550 x 920 mm Weight: 181 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers Ppjdpfx Aasd R Saqolol • electric counter • delivery conveyor to the right

Year of construction: 2023, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Ppjdpfx Aod Sninjalsl Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Ppjdov Al Nqspfx Aalol Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Ppedsvlw Hajpfx Aalol Weight : 89 kg Compressed air connection : G 3/8

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, overall weight: 3,888 kg, power: 160 kW (217.54 HP), fuel type: electric, volume flow: 1,411 m³/h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: type plate available, Compair /Pureair D160 RS oil-free screw compressor Frequency controlled Podpfxoldfpxj Aaljpl in good working order

Condition: good (used), Year of construction: 1976, Pressing force: 20 t Stroke rate: max. 150 rpm, adjustable via PIV gearbox from the control panel Stroke, adjustable: 10 - 50 mm Installation height: 270 mm (maximum stroke at top, without wedge plate) Ram reinforcement: 50 mm Table area: 340 x 320 mm (W x D) Pass-through opening: 70 x 180 mm (W x D) Ram area: 160 x 230 mm (W x D) with wedge plate Ppodpewufrzefx Aaljl Drive power: 2 HP Features: - 1 connecting rod - Double V-ram guide - Motorized oil lubrication - Manual ram adjustment, 50 mm - Mounting bracket for feed unit, tiltable - 3 cams for feed unit etc. - Free-standing control panel - Forward and reverse operation - Manual setup using a rod

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Pedpjdhzf Ijfx Aalepl Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Year of construction: 2022, operating hours: 1 h, condition: new, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min Pedpfedtm Ndjx Aalopl at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Power (PS) 16.0 bar Continuously adjustable Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Podjwpupxepfx Aalspl Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel casters with parking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 3100 Press’ colour production system. Item for sale: 1 x Xerox Versant 3100 Press with the following equipment: Includes Fiery NX Premium Server graphic arts package Includes Fiery connectivity with FreeFlow Includes Paperdeck A-CF03 Includes Stacker LCS-1 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 3,926,059 pages Colour: Approx. 3,581,579 pages Black: Approx. 344,480 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: Ppjdpfx Aaexnxwueljl You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton Ppedpfx Aasvhc Stsljl CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: good (used), functionality: fully functional, Year of construction: 2000, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Neck LGL France type NLEX 35, Sideros Engineering dust extraction system Podpfexx R A Djx Aaljpl 3000W CO2 laser source DOCUMENTATION AVAILABLE

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface Ppedjx D Nyxopfx Aaljl • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Additional equipment • Automatic pallet changer

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Pjdpfx Aaetr Iw Heljpl Empty weight: 2.150 kg Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 950 h, load capacity: 300 kg, mast type: free lift with telescopic boom, overall weight: 7,490 kg, fuel type: diesel, color: white, Equipment: ABS, The truck-mounted work platform 20m 3.5 t can be operated with a standard category B driving licence and is ideal for all tasks at heights. Delivery of the work platform is possible but will be invoiced separately. Ppsdpfoxvmn Rex Aalel

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,003 h, This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Additional information • Punching Force: 300 kN • Shearing Force: 250 kN • Sheet Metal Storage: 40 pallets, 3000 x 1500 x 150 mm • Various spare parts Ppjdpfxsx D H Dbj Aalel • Weight: 22000 kg