Used Power Sources for sale (39,790)

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: Nsdpfx Aedz Srbohkjda - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: new, input voltage: 400 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 25 A, welding current (max.): 400 A, Lorch iQS series – Top-level welding for maximum productivity in industrial manufacturing Maximum performance and reproducible quality: The Lorch iQS series is a powerful, digitally networked MIG-MAG welding system for demanding industrial applications. The newly developed inverter generates an exceptionally stable and smooth arc. All parameters can be continuously adjusted to the optimal operating point – for high-quality, reproducible welds on steel, stainless steel, and aluminum. The iQS is suitable for both manual welding and robotic integration, providing a future-proof platform for modern manufacturing companies. Less spatter, less rework: The innovative Smart Process Control Engine enables continuous development of the available welding programs. New processes and functions can be transferred to the system, ensuring that users always work with the latest technology. The integrated RCS module improves short-circuiting in particular: the process runs more cleanly, the weld pool is easier to control, and spatter formation is reduced. This increases weld quality and reduces time-consuming and costly rework – especially on thin sheets under 3 mm. Ndsdpfxozwfgbo Ahkoa Lorch Speed processes for higher productivity: Depending on the configuration, proven Lorch processes such as SpeedPulse XT, SpeedArc, SpeedTwin, SpeedRoot, SpeedUp, and SpeedCold are available. They enable higher welding speeds, better penetration, attractive weld bead surfaces, and precise process control. Users receive a flexibly configurable solution for a wide range of materials, weld geometries, and welding positions. Intuitive operation with Smart Cockpit: The robust 7-inch Smart Cockpit can be operated via touchscreen or rotary control – even with welding gloves. A clear menu guides users, displaying only suitable material, wire, and gas combinations, thereby reducing incorrect settings. Important parameters can be accessed immediately via the configurable QuickAccess menu. Current values are visualized during welding; subsequently, the Hold function indicates whether the specified parameters have been met. Networked, robust, and easy to service: WLAN and Lorch Connect enable the recording, documentation, and analysis of welding data, as well as updates and future function upgrades. The encapsulated air duct, the dust-protected electronics area, and the modular design simplify maintenance and ensure uncomplicated service. Optionally, the robust MF-09 wire feeder complements the system with 4x4 drive, a quick-change system, and various chassis and transport options. Technical performance variants: The iQS 3 offers a welding range of 25 to 320 A, and the iQS 5 offers a range of 25 to 400 A. Both models operate on 3-phase power supplies from 380 to 480 V, have an IP23S protection rating, and a robust 4x4 wire feed unit. The equipment and scope of delivery depend on the chosen configuration. Document 1: technical details IQS series (EN) Document 2: brochure IQS series (EN) Document 3: technical data IQS series (DE) Document 4: brochure IQS series (DE)

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle Ndedpfxszugn Is Ahkoa 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Nedszugnzepfx Ahksda Good condition

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Ndodpfx Aohubg Tohkoa Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition Ndedpfx Ast Awm Dehkja - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled Njdpfx Ahjd N E Rveksda - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volts AC Input frequency: 47-63 Hz Input current: max. 12 Amps Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor Ndjdpfxsdz Sras Ahkea - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relay - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Condition as shown, without additional accessories and connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic Ndodpjpy Uzysfx Ahkea - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) Nodpfjyhq A Rex Ahkoda - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: used, machine/vehicle number: 000150000222, welding current max. 260 A 260 A at 60 % ED Nodpfxof Sa T Uo Ahkjda 201 A at 100 % ED remote control SELCO RC08 space requirements length - 560 x width - 240 x height - 400 mm weight approx. 37 kg

Condition: used, Year of construction: 2024, operating hours: 53 h, functionality: fully functional, overall weight: 1,550 kg, fuel type: diesel, color: yellow, power: 80 kW (108.77 HP), output current: 144 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, HELVETICA POWER offers: 100 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Ndedpfx Ahjzwf Apoksa Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,600 mm, total height: 1,450 mm, fuel: diesel, overall weight: 1,495 kg, continuous power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), cubic capacity: 5,320 cm³, fuel tank capacity: 240 l, battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance – everything must go! HELVETICA POWER ® 125 KVA / 100 KW emergency power generator, diesel generator, power generator ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new goods!!! ⭐️ "Diesel engine by RICARDO ("KOFO" Premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, Noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the Premium series – a top-of-the-line device with top components. Warranty · Guarantee · Service ⭐️ One-year factory warranty! ⭐️ Optional: 2-year warranty / guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge - worldwide delivery on request Other models & configurations ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heating ⭐️ individual configuration is possible at any time Technical data Rated power: 100KW/125KVA 50Hz 220V / 400V - three phases water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) large tank for 8 hours of operation Size: 2600x1150x1450mm Weight: 1495kg including sockets: Ndodpfszwfpiex Ahksa 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, pay attention to the relevant guidelines to be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup power supply, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small unit, industrial unit, professional generator, high-performance unit, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power device, emergency power device, diesel unit, construction site unit

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,500 mm, total height: 1,300 mm, fuel: diesel, overall weight: 1,410 kg, cubic capacity: 5,320 cm³, noise level: 68 dB, power: 80 kW (108.77 HP), battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance, everything must go: HELVETICA POWER® 100 KVA / 80 KW emergency power generator, diesel generator, power generator ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new! ⭐️ "Diesel engine from RICARDO ("KOFO" premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the premium series – a top-of-the-line unit with top-quality components Warranty · Guarantee · Service Ndodpfszwfk Tox Ahkoa ⭐️ One year manufacturer's warranty! ⭐️ Optional: 2-year warranty/guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge – worldwide delivery on request Other models & configurations ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heater ⭐️ individual configuration is possible Technical data Rated power: 80 KW/100 KVA 50 Hz 220V / 400V - three-phase water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) large tank for 8 hours of operation Size: 2500x1150x1300mm Weight: 1410kg including sockets: 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, please pay attention to the relevant guidelines that must be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, changeover switch, power distributor, CEE

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 850 kg, fuel type: diesel, color: yellow, power: 22 kW (29.91 HP), output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 22 kW (29.91 HP), nominal power (apparent): 28 kVA, continuous power: 22 kW (29.91 HP), continuous power (apparent): 28 kVA, total length: 2,100 mm, total width: 950 mm, total height: 1,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGE V, type of cooling: water, HELVETICA POWER offers: 22 KW 28 KVA generator / diesel generator ⭐️ Stage V (EU) / Euro 5 compliant - suitable and approved according to the current emission standards for Europe. ⭐️ In an oil-tight chassis, e.g., for construction sites, industry, agriculture, and much more. ⭐️ CE-compliant according to applicable regulations. ⭐️ Soundproof (Super Silent) version. ⭐️ With an emergency power changeover switch / ATS (Automatic Transfer Switch) for emergency power operation. ⭐️ Digital control + built-in remote control. Ndodpfx Ahozwfb Sokea ⭐️ Yunnei Stage V diesel engine suitable for continuous operation. ⭐️ Stamford type (CN license): "CE" certified, high-quality synchronous alternator "brushless" with 100% copper winding. ⭐️ AVR system (load-dependent voltage regulation / Automatic Voltage Regulation). ⭐️ The generator is supplied with a very practical, sturdy yellow tarpaulin cover. Warranty / Guarantee / Service ⭐️ One year factory warranty! ⭐️ Optional: 2-year warranty / guarantee, which extends far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe). ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: upon purchase. ⭐️ Delivery possible throughout Europe (mainland) for an additional charge. 🚚 Collection: at the Kefikon (TG, Switzerland) or Konstanz (Germany) warehouse. 🚚 Worldwide delivery on request. 👍 Dealer inquiries welcome - contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Other Models & Configurations ⭐️ Other power classes available (approx. 7 kW to 100 kW). ⭐️ Stage V (EU) / Euro-5 compliant versions. ⭐️ Alternative engine options possible (e.g., Cummins, Deutz, Volvo). ⭐️ Optional equipment: larger tank, additional tank, tank and water heating. ⭐️ Many variants available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keyword list: generator, power generator, emergency power generator, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power unit, emergency power unit, diesel unit, construction site unit 22 KW 28 KVA 30 KW 38 KVA 34 KW 43 KVA 44 KW 55 KVA 19 KVA 15 KW 38 KVA 30 KW 63 KVA 50 KW 125 KVA 100 KW 100 KVA 80 KW

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,610 kg, fuel type: diesel, color: yellow, power: 100 kW (135.96 HP), output current: 180 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 100 kW (135.96 HP), nominal power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), continuous power (apparent): 125 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, emission class: euro5, Equipment: AdBlue, HELVETICA POWER offers: 125 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. With Oil- and water Heater. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Nsdpfx Ajyvktajhkjda Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,550 kg, fuel type: diesel, color: yellow, power: 80 kW (108.77 HP), output current: 144 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, HELVETICA POWER offers: 100 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Ndjdpfx Ahomw Unkskea Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 26,437 h, laser power: 3,000 W, travel distance X-axis: 3,065 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 150 mm, overall weight: 10,000 kg, total height: 2,200 mm, This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 31631 worktime hours, of which 10574 are laser emission hours. The machine has a laser power of 3 kW. Machine Benefits Qualitative Machine Benefits • Low hours Technical Machine Benefits • Fiber laser 3000w • 2 tables • Work feed x/y 100 m/min Ndjdpfjzvu Nvsx Ahkoa Dimensions Machine Depth 3757 mm

Condition: new, Year of construction: 2026, Powered Load Moving Skates with a compact design, low overall height and load capacities of 10, 24, 40, 48 and 80 tonnes. Intelligent Single-Joystick control for all movements. Available in as version with a hydraulic lifting cylinder (+H) or as a DUO or DUO H, with synchronised control of two skate systems. This enables loads to be manoeuvred in a crab steering or round tight bends. The POWER-Skate is the modern way to effectively synchronise or move machinery and equipment in production. Please send us your enquiry. Nsdpfxogi Dm He Ahkjda

Condition: excellent (used), Year of construction: 2018, 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. Ndedpfx Ajzvc I Hehkja With Sick M4000 Safety Light Curtain, Cosmotec Chiller Unit, Chiller Unit, Internal Camera & Manual. Overall Dimensions L10,600 x W3,450 x H2,185mm. Weight 10,000kg. Note: Machine Has Full Service History Records Since Purchase 2018.

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Nedpfx Aet Nhm Ishkoda

Condition: used, Year of construction: 2016, Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information Nedpszt U Umefx Ahkoda

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V Ndsdpfsfm T Euex Ahkea - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm Ndjdpfx Aoy T Szyshksa TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Ndsdpfx Ahjzncm Hskja Operating hours (according to meter): 27,875 h