Oil-injected rotary screw compressor with integrated refrigerant dryer ATLAS COPCO GA15 FF

ATLAS COPCO GA15 FF

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Ncsdpfxewfg Hhe Afasr

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Rated motor power 11 kW Njdpfoxnnd Dox Afaocr Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Weight 580 kg Air receiver 350 l Compressed air connection G 1 Sound pressure level 66 dB(A) Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Nsdpfx Afsxdc Uvjascr

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary. Nedoftdv Ujpfx Afaocr

Condition: excellent (used), functionality: fully functional, SCREW AIR COMPRESSOR model KAESER SK 19 with Vertical tank Lt. 750 second hand machine in Excellent working condition motor power Hp 15 ( Kw 11 ) working pressure bar 10 volt. 380/50 Nedpfx Afjydiggsajcr

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece Ncedpfx Aetlzdqjfasr -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull Nedpfxsl Tuvdj Afascr -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Nedpfx Afshpx U Asaocr

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Nsdpfx Aet Iwyuefaocr Condition: used (see pictures and type plate)

Year of construction: 1985, condition: good (used), Offer 22556 Technical data: - Saw blade diameter 420 mm - saw blade bore 30 mm - max. cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - cutting range see diagram enclosed - tilting range inwards manual 90 - 22,5 ° - inclination range inward manual 90 - 45 ° - Saw blade speed 2800 rpm - drive 380 V / 2 x 4000 Watt - Compressed air supply 7 bar - Air consumption per working cycle approx. 64 l - space requirement approx. W 4500 x H 1950 x D 1600 mm - weight approx. 1400 kg Nodpfxoimdlro Afascr - with: - cutting length adjustment with positioning control - positioning control renewed approx. 2002 by WOLFF - saw unit swiveling and tilting for high and wide profiles, - as well as shift cuts