Used Moulding Machine for sale (64,118)

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Ledpfex D Rlpox Ad Nshb Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,421 h, Control Unit Brand FANUC Clamping Unit Clamping force 100t This FANUC ROBOSHOT S100iA was manufactured in 2021. It's an electrical injection moulding machine featuring screw diameters of 26 mm, 32 mm, and 36 mm. Operating hours range from 4,421 to 18,606. Consider the opportunity to buy this FANUC ROBOSHOT S100iA electrical injection moulding machine. Contact us for more information. Lodsx D R E Ajpfx Ad Nohb Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1500 kN Opening stroke 300 mm This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Lhsdpfjx D R T Hex Ad Nsb Injection Moulding

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Lhsdpex D Dkxefx Ad Nob Injection Moulding

Condition: ready for operation (used), Year of construction: 2003, operating hours: 72,069 h, Injection Unit Screw diameter 90 mm Lhjdpfxex D Eblj Ad Nsb Clamping Unit Clamping force 5500 kN This Engel CL 4550/550 was manufactured in 2003. It features a screw diameter of 90mm, a closing force of 5500kN, and an opening distance of 700mm. Mold installation height ranges from 250mm to 850mm, and the plant size is 1200x1200mm. Includes a robot but excludes water temperature control equipment and conveyor belt. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Lodpfjx D Nc Hox Ad Njhb Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Screw diameter 55 mm Clamping Unit Ledpfx Ajx D Ecved Njhb Clamping force 2500 kN This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2009, Injection Unit Screw diameter 180 mm Clamping Unit Clamping force 3300 kN This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information. Lhjdpfx Adjx D I R Ao Njb Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Injection pressure 2494 / 1970 / 1878 bar Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN Lhodex D Rwropfx Ad Nsb This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Ljdpfx Adox D Rq Ee Njhb Application Types Injection Moulding

Year of construction: 2011, condition: ready for operation (used), General Data Measurements width 1.42 m Measurements depth 4.36 m Measurements height 1.95 m Machine weight 4700 kg This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding Lhsdpjx D N D Djfx Ad Nob

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Lsdpfsx D N E Iex Ad Njhb

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language Ljdpfx Adox A Uc No Nehb CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Lhsdjw Iddzjpfx Ad Nsb Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams Lodpog Ailcefx Ad Nohb BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: good (used), Year of construction: 2015, Ref. no.: 18589 Hersteller: NETSTAL Lsdpfx Adexdxpcs Njhb Type: Elion 1750-510 M Electric machines Year of construction: 2015 Clamping unit Clamping force: 175 ton Opening stroke: 450 mm Distance between tie bars: 560 x 560 mm Mould height min.: 500 mm Mould height max.: 800 mm Platen size (h x v): 830 x 845 mm Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight: 193 g Injection pressure: 2400 bar Measurements and weight Dimensions: 7,1x2,2x2,0 m Machine weight: 12750 kg

Condition: new, Year of construction: 2025, functionality: fully functional, clamping force: 6 kN, screw diameter: 14 mm, injection pressure: 2,023 bar, total length: 1,200 mm, total width: 743 mm, total height: 690 mm, overall weight: 315 kg, power: 4.1 kW (5.57 HP), input voltage: 400 V, warranty duration: 24 months, Equipment: documentation/manual, BOY XXS SP14 (ø14 mm Screw) Discover precision and performance with the BOY XXS SP14, equipped with a ø14 mm screw. Ideal for high-accuracy applications in compact production environments. Included Features: Ledpewi Hgisfx Ad Njhb - 4 freely programmable inputs and outputs for maximum flexibility - EU67 interface for seamless robot integration - Comprehensive interface package including Network/Ethernet FTP, VNC, OPC-UA, EM77, and EM82 – license fee included - Mobile machine table with practical drawer for easy access and organization - Durable packaging in a heat-treated wooden crate, ensuring safe and compliant transport - Machines have never been unpacked and have 0 operating hours - Full Warranty is included Reason for selling: Purchased for a project that was cancelled. Sold and delivered by Earfab ApS. (DK) Prices are excluding VAT. and Taxes

Condition: ready for operation (used), Year of construction: 1993, Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mold installation height min./max.: 225mm/not specified, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On-site inspection is possible. Individual sale possible. Lodpfx Adsx Hz Sbj Nshb

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Ljdpfxsx Hz I Nj Ad Nshb Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: - 1 x air valve Lhsdpjx Hzzcefx Ad Njb - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Ljdpfxjx Hygwo Ad Nshb Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate Lhjdpfx Aox Hyf Tjd Neb - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Lsdpfxsx Hydvo Ad Nehb Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Lhsdpfx Adox Hx Sfs Nsb Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Lhjdjx Hx Ndspfx Ad Neb Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67