Injection Moulding Machine

Engel EM 740/180HL

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Bsdpfxju Awalj Adredd Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: excellent (used), Year of construction: 2015, operating hours: 55,201 h, functionality: fully functional, screw diameter: 70 mm, Technical advantages for the machine: - high performance and precision, - fully electric and energy-efficient, - rapid, dynamic, and highly precise movements thanks to a five-point toggle clamping system with low-friction platen guidance on precision linear bearings, - efficient injection unit ensures ultra-fast injection, - complete service documentation and operating manual, - maximum energy efficiency through the consistent use of high-efficiency servo drive technology. Bdodpfx Adexfbdxsrod

Condition: used, Product: Big bag sack holder. Condition: used Dimensions: 2400 x 1450 x 1100 mm Load capacity: 1 t Available quantity: 32 pcs Stackable. Bdjdpfexdh E Hex Adred

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Bsdpfxjx Nr Rye Adrjdd Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW Bjdpfxoyc Ewxo Adrjdd - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: not inspected (used), Year of construction: 2006, weight max. in kg ca. 1.000 kg fork length ca. 1.140 mm stroke height ca. 2.750 mm Jungheinrich HC 110 WP 10 M High lift pallet truck ----- Technical manufacturer's description: Lifting height: approx. 2,750 mm Load capacity: approx. 1,000 kg Bdsdexpi Erepfx Adred Overall height: approx. 2,090 mm, Fork length: approx. 1,140 mm ----- (Technical data according to manufacturer - without guarantee!) All prices quoted are net plus VAT. Translated with (free version)

Condition: used, Year of construction: 2011, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, fork length: 1,150 mm, overall weight: 150 kg, total height: 1,350 mm, total length: 1,750 mm, total width: 550 mm, No. 04498 Electric high lift pallet truck Lifter HX10E 540 Used, year of construction 2011 Electric lift, manual drive Load capacity 1000 kg Fork length 1150 mm Maximum lift height 800 mm Battery 12 V Bdjdpjxyx Tmjfx Adrjd Including charger EASYLOG 1210 Good condition, battery lasts approx. 1 week Made in Italy, CE-compliant Transport dimensions approx. 1750 x 550 x 1350 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, column diameter: 105 mm, injection pressure: 1,555 bar, mold height (min.): 350 mm, ejector force: 59 N, ejector stroke: 200 mm, opening stroke: 800 mm, heating capacity: 31.3 kW (42.56 HP), Equipment: USB port, documentation/manual, OPPORTUNITY Press ready for use, in very good condition, Euromap 67, 4 hydraulic cylinders, hot runner system for the mold with 12 zones included. All details are visible in the photos. Bsdpeww D Rnefx Adrodd

Condition: excellent (used), Year of construction: 2013, clamping force: 4,000 kN, Equipment: documentation/manual, Control: CC200 Year: 2013 Clamping force: 400 t Max daylight: 1450 mm Mould height min max: 450-1000mm Ejector stroke: 250 mm Screw diameter: 70 mm (S8 screw G1) Shot volume: 1501 cm3 Injection rate: 319cm3/sec Specific injection pressure: 2252 bar Max screw speed: 160 rpm Type: Horizontal Drive: Hydraulic Bjdpfx Aeyctyzsdrsdd 2 core pullers 16 mould heating zones 12 waterflow Euromap 67 ECODRIVE AIR VALVES

Condition: used, Year of construction: 2005, Technical details: Bsdpfxewftr Do Adredd screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *