Used Construction Crane for sale (21,786)

Condition: excellent (used), Used steel hall 36.5 x 13.5 m, eave height from finished floor approx. 9.8 m, gable roof with 3° pitch, top edge of crane runway for installation of bridge cranes approx. 8.5 m from finished floor. The existing hall was originally fitted with two 10t cranes. Steel structure including roof purlins, wall rails, crane runway, without wall panels, windows and doors, bracings... as shown. Base plates need to be newly constructed on site by the buyer. Pricing: €102,000, ex works, loaded, from location 56759 Kaisersesch. Additionally offered: 2 Demag single-girder bridge cranes, 10t x 12,000 mm, lifting height from finished floor approx. 7.5 m. Lifting speeds 4/0.8 m/min, trolley travel speeds 20/5 m/min, crane travel speeds 40/10 m/min. The cranes will be handed over in top condition after workshop inspection, each with new HBC Micron 5 radio control, mutual optical shutdown, pre-limit shutdown at the trolley and crane runway ends. Pricing: €24,000 per crane, ex works, loaded, from location 56759 Kaisersesch. Dujdpfxspqx I Hj Aiwjt New power supply for on-site installation along the crane runway, 36 m, 4-pole, 15 mm², incl. crane main switch, €4,000 Drawings and structural calculations are not available and must be provided by the buyer. Package price for all items together, ex works, loaded: €130,000 negotiable.

Year of construction: 2008, condition: good (used), - OFFER 21078 - Technical data: Dodpsgl Ap Nsfx Aiwout - Load capacity E.-chain hoist 250 kg - lifting speed approx. m/min - Operation of the chain hoist via manual remote button - Man. Procedure hoist / transverse travel + longitudinal travel - track width variable up to approx. 3000 mm - hook height approx. 2200 mm - crane track length approx. 4000 mm - headroom approx. 3500 mm - UK - crane girder approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm H 3500 mm - 2 longitudinal trolley girders approx. 4250 mm - transverse trolley girder approx. 3000 mm - weight of the plant approx. 1000 kg

Condition: used, Year of construction: 1983, machine/vehicle number: 213302/1, Tower crane - Liebherr Type: 33K Dedpfx Aisv N E Ndjwsut

Year of construction: 2008, condition: good (used), - OFFER 21077 - Technical data: - Load capacity E.-chain hoist 250 kg - lifting speed approx. m/min - Operation of the chain hoist via manual remote button - Man. Procedure hoist / transverse travel + longitudinal travel - track width variable up to approx. 3500 mm - hook height approx. 2800 mm - crane track length approx. 5000 mm - headroom approx. 3900 mm - UK crane girder approx. 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm H 3900 mm Dusdpfx Aeglu R Heiwjt - 2 longitudinal trolley girders approx. 5000 mm - transverse trolley girder approx. 3500 mm - weight of the plant approx. 1000 kg

Year of construction: 1991, condition: excellent (used), Track centre distance approx. 40.0 m Projections usable on both sides/total approx. 10.0/14.0 m each Lifting height/hook path approx. 8.0 m Make/new body AUMUND/TEICHMANN Year of manufacture/new superstructure 1991/2024 Crane equipped with: - Double-rail trolley accessible with DEMAG electric hoist, optionally with double hoist units and conversion to slewing trolley - Cab control travelling with the crane, optional radio remote control Dujdpfxoqcu Tfj Aiwet - Scissor guide for load stabilisation with slewing gear for motor grab connection

Year of construction: 2005, condition: excellent (used), Track centre distance currently approx. 35.0 m Projections Fixed support usable/total approx. 6.1/10.7 m Swing support usable/total approx. 4.5/8.4 m Lifting height approx. 8.0 m Make/conversion AUMUND/TEICHMANN Rebuilt/reconstruction 2005/2024 Dodpfx Aisqcvdpowjut Crane equipped with: - stable double-rail trolley with DEMAG standard electric wire rope hoist - Radio remote control and plug-in emergency control

Year of construction: 2016, condition: excellent (used), Span current/extendable approx. 8,0/12,0 m Lifting height current/extendable approx. 10,0/changeable m Make/Reconstruction DEMAG/TEICHMANN Year of construction/Operating time only approx. 2016/2 Jahre Stress group H2 B3 Duedpfx Aioqcu T Ujwjt Crane equipped with: - DEMAG monorail trolley, short design in M5 - Radio remote control - Trolleys optionally available with wheel flange guide on flat iron rail or barrier free steel plate slat

Year of construction: 2008, condition: excellent (used), Track centre distance currently approx. 59.75 m Projections on both sides currently/formerly available approx. 12.0 /32.0 m Lifting height approx. 14.5 m Make/new body TEICHMANN Baujahr/Neuaufbau 2008/2017/2024 Dedpfxsqcvf He Aiwjut Crane equipped with: - Two-rail slewing trolley with STAHL double hoists Equipment for grab and magnetic traverse operation - Radio remote control (cabin control can be retrofitted)

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. Dodpfsq Nia Iex Aiwout General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Duedpsq Nf Tvjfx Aiwot Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. Duedeq I Nviepfx Aiwot --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. Duedjq N Ud Ispfx Aiwot 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Year of construction: 1984, condition: used, 1x Wimag gantry crane Load capacity: 20,000 kg Span: 16 m (adjustable to 12 m in 500 mm increments) Outreach: 0 m Lifting height above rail: 7.5 m Hook travel: 25 m Dsdpfx Aeyx Ercoiweut Radio remote control Cable reel suitable for 40 m

Condition: used, 1x gantry crane Working load: 2 x 10,000 = 20,000 kg Duodpfx Aisyx Dyfewet Span: 24 m Cantilever: 1 x 3 m Lifting height above rail: approx. 8 m Hook travel: 8 m Radio control Complete with crane rail

Year of construction: 2023, condition: like new (used), functionality: fully functional, 1x BKRS gantry crane Dodpjyx Dv Tofx Aiwjut Working load: 2 x 20,000 = 40,000 kg Span: 29 m Cantilever: 2 x 8.9 m Lifting height above rail: 10 m Hook path: 13.5 m Radio remote control Cable reel suitable for 90 m Complete with crane rail UIC60, length: 2x 180 m

Condition: like new (used), functionality: fully functional, Year of construction: 2019, 1x BKRS gantry crane Dsdpoyx Dlhofx Aiweut Rated load: 50,000 kg Span: 21.5 m Cantilever: 2 x 6 m Lifting height above rail: 10 m Hook travel: 45 m Radio remote control Cable drum suitable for 110 m Complete with crane rail UIC60 length: 2x 110 m The crane was used for a tunnel boring project Demag components

Condition: used, functionality: fully functional, Year of construction: 2009, Span: 35 m Load capacity: 130 tons Dsdpot D H H Aefx Aiwout Including 2 x 75 m rail A75 Drawings on request / drawing on request No hoist unit / no hoist Can be adapted to an overhead/gantry crane

Condition: not inspected (used), functionality: unexamined, Year of construction: 2025, total height: 1,400 mm, total length: 900 mm, total width: 800 mm, load capacity: 2,000 kg, throat depth: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Load capacity: 2 t Reach: 1,500 mm Dusdsyr H Hgspfx Aiwet MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 900 x 800 x 1,400 mm Weight: 100 kg External reference: 38

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Djdpfx Aiexqd T Hjweut Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Available immediately Duodpfx Ajlhqdmsiwet

Condition: refurbished (used), Various Crane / Depa pumps, various designs and sizes, cpl. refurbished and available at short notice Dedpfsfcy A Isx Aiweut

Condition: excellent (used), functionality: fully functional, DEMAG 635 H13 hoist, complete Load capacity 10,000 kg, 4/1 reeving Dsdpov T Tigofx Aiwjut Good condition Free delivery within Germany! Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge From large DEMAG spare parts stock, see also my other offers Low hours, very good condition, offered due to dismantling of factory hall Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Price: €4,490.00 each, complete For purchase of 8 units: €3,490.00 each net Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well! Duedpfjv T Tf Uex Aiwst

Condition: good (used), mileage: 611 km, color: orange, lifting height: 6,500 mm, Year of construction: 2006, operating hours: 4,225 h, Field of application: Construction CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Boki Kiefer HY1251 with Palfinger PK 2700 A * 2006 * Diesel * 4225 working hours * 611 kilometers Dusdpfewakzrjx Aiwot * 6.5 meters hook height * 5 meters horizontal range * Load moment 2.6 tons/m * 2370 kg own weight * equipped with tipper body * including crane book and other documents

Condition: used, mileage: 120,000 km, power: 355 kW (482.67 HP), first registration: 09/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, crane, navigation system, parking heater, soot filter, Chat via WhatsApp now: Contact our sales advisor quickly & easily. Internal ID number: [435303] ----Optional add-ons: * New inspection * New MOT & emissions test * Nationwide delivery * Financing available even with zero down payment ---- Very well-maintained DAF XF 480 FAN with flatbed body and Palfinger PK 24.001 SLD 5 loading crane. 2023 vehicle, 3-axle / 6x2, automatic transmission, sleeper cab, and comprehensive equipment. Ideal for glass, building materials, steel, machinery, pallet goods and crane operations. Vehicle data: - Manufacturer: DAF - Model: XF 480 FAN - Body: Flatbed / Crane - Crane: Palfinger PK 24.001 SLD 5 - Transmission: Automatic / automated manual gearbox - Axles: 3-axle / 6x2 - Cab: Sleeper cab Equipment / Highlights: - Palfinger rear-mounted crane PK 24.001 SLD 5 - Flatbed body with side panels - Crane radio remote control included - Outriggers / stabilizers Djdpfey Rdb Hox Aiwout - Retarder / secondary brake - Air conditioning - Auxiliary heater - Comfort driver’s seat - Sleeper bunk - Multifunction steering wheel - Navigation / infotainment system - Cruise control - Trailer coupling - Storage boxes / toolboxes - Digital tachograph - Very good overall visual impression ----Interested in leasing or financing? We offer attractive terms – also possible with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Mon-Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ---Note: All information published online is non-binding and intended only as a general vehicle description. Errors, typos, and prior sale excepted. The binding condition of the vehicle is determined solely by the contract on site or written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our business customers.