Used Fence for sale (969)

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 744 liters This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Godoy R Sr Hopfx Ab Djit Thanks to its

Year of construction: 2022, condition: new, Angle: 0° - 90° Maximum cutting length: 1370 mm Gedpei Ezr Nofx Ab Doit

Condition: excellent (used), Type: ZF 2 Manufacturer: WAFIOS Year of manufacture: - Serial No.: 2.1062.013 Capacity: 45 weft wires/min = 3.712 m Linear wire diameter: Core: 1.6 mm / Outer diameter: 2.6 mm Weft wire diameter: Core: 2.6 mm / Outer diameter: 3.6 mm Tensile strength: 600 – 700 N/mm² Number of twists of the 3 line wires: Crimp pitch: 19.14 mm Linear wire spacing: 153 mm Weft wire spacing: 82.5 mm Max. braid height: 1,250 mm Condition of the machine(s): Used, dismantled Gijdpfxjwr Akco Ab Det

Condition: excellent (used), Year of construction: 1978, Machinetype: chain link fence machine Double spiral Manufacturer : WAFIOS Type: VDF80 Constr. year: 1978 wire diameter: 1,6-3,8 mm mesh width: 20-80 mm Giedpfx Abjvdtaas Djt working width: 2000 mm capacity: 160 m²/h

Condition: excellent (used), Year of construction: 1980, WAFIOS DF5 Gisdpfx Ajv Uw Ddjb Det Wire range- 1,5- 5,0 mm Mesh with - 20 - 100 mm Working with - max.2000mm Capacity - 170 m2 / hour Tooling for the mesh width - 60 mm

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 744 liters Gijdsyccxaopfx Ab Dst This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Thanks to its

Condition: used, Refurbished 2-rack roll cage is a practical transportation solution for various applications. Refurbished refers to the fact that the roll container has been refurbished to bring it back to good condition so that it can be used again. Gsdpfxjy Hpy To Ab Doit In this case, it is a roll cage with a new roll bottom and used insert gates. Using refurbished

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 792 liters Gedoy Hptajpfx Ab Dsit This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Thanks to its

Condition: used, Used 2 rack roll cage, bearing the Kruizinga trademark, is a practical transport solution for various applications. Gsdpfx Aey Hprvjb Deit Equipped with 2 removable clamp gates made of galvanized steel, keeping the cargo securely in place during transport. Comes standard with 2 nylon straps to keep the goods firmly in place and prevent them from sliding or

Condition: excellent (used), Rule for Raimann KM 310 Gsdeyaxdaepfx Ab Doit

Year of construction: 2000, condition: used, Milling stop adjustment: via handwheel Milling stop measurement display: Siko counter Milling jaws adjustment: handwheel Gisdpfx Absy A Hi Ro Det Milling jaws measurement display: Siko counter

Condition: good (used), Year of construction: 2003, Head machining of posts, boards, laths for tear-free machining. Gijdogmt Eropfx Ab Dst with magazine which works itself off automatically 2 milling spindles move independently from the outside to the middle so that there are no tears.

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, Giedpfxjykar He Ab Dot -45/+45° tiltable, electric height and swivel adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Shipping available at extra cost!

Year of construction: 2026, condition: new, TNDG manual positioner with handwheel operation and pneumatic clamping. Measurement display via linear encoder and digital readout. Available in lengths of 3, 4, 6, and 8 meters Gisdpfx Abopa Nzys Dst Working height: 800–1050 mm Permissible load: 70 kg per meter Roller dimensions: 40 x 300 mm PACKING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Gedpfxsm Twnlj Ab Dsit Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Giodpfstp H Erex Ab Dot Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2026, functionality: fully functional, The FORMA MSF-4 is a high-precision round bar milling machine designed for the efficient production of cylindrical wooden poles and sticks. This industrial-grade machine is ideal for manufacturers of fencing, tool handles, and playground equipment. Key Technical Advantages: High Performance: Specifically engineered for smooth surface finishing at high feed rates. Precision Milling: Capable of processing various wood types into perfectly uniform round bars. Robust Construction: Built for 24/7 industrial use with a 2024 year of construction, ensuring the latest safety and efficiency standards. Fully Functional: New condition, tested and ready for immediate operation. Why choose MSF-4? Ease of Use: Simple setup and minimal maintenance requirements. Versatility: Suitable for both softwood and hardwood processing. Quality Guarantee: Manufactured by FORMA, a trusted name in woodworking automation. Gedpfx Absuab Acj Doit

Year of construction: 1972, condition: good (used), working width: max. 1.700 mm Gjdog Ryvwspfx Ab Dsit number of length wires: max. 16 wire diameter length wires; 2,5 - 3,25 mm wire diameter edge wires: max. 3,25 mm wire diameter knot wires: max 3,2 5mm

Condition: good (used), Barrier, barrier, security fence, fence system, barrier fence, shaft barrier Godpfx Abownmw Sj Dsit -Barrier: Fence elements height 1060 mm 14 pieces -7x fence elements length 2100 mm -6x fence elements length 1700 mm -1x fence elements length 1300 mm -Price/Delivery: complete -Fence feet: can be supplied for an additional charge -Transport dimensions: 2100/1060/H520 mm -Weight: 284 kg

Condition: used, Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose, barrier fences -Snow fence: 2.25 m wide -2 rolls: a 50 m -Price: complete -Dimensions per roll: Ø 350/2270 mm Gjdpfxsfdmhao Ab Doit -Total weight: 230 kg

Year of construction: 2020, condition: new, Double-sided mitre stop Year of manufacture: 2020 For fast and stepless production of mitre cuts on narrow and short workpieces at any angle from 0° to 90° For crosscuts up to 1375 mm Easy handling and quick installation on the saw's roller carriage Suitable for Panhans models 680_10_20 Gedokwhalopfx Ab Deit Conversion kit for other models available on request Availability: short-term Location: Hochheim

Condition: used, Hewema BÖSCH A 97 mitre fence suitable for every sliding table saw Gijdpeuv Evuofx Ab Det

Condition: as good as new (ex-display), Year of construction: 2024, consisting of: ᐳ Stop rail 2 m long ᐳ 2 pieces complete stops ᐳ 1 piece measuring scale right ᐳ left Gsdpfofrnpnex Ab Djit ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws - The delivery does not include the wooden base strip 50 x 45 mm, onto which the stop rail is screwed.

Condition: good (used), Machine Security Fencing Dimensions approx 3000mm x 4000mm Gedpfxjpy Ei Uj Ab Deit Complete with entry gates

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Power: 7.5 kW Giedpfoy H Errsx Ab Djt EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence