Soosan SB20-30-40-81 All Soosan Models

SOOSAN SB20-30-40-81 All Soosan Models

Condition: excellent (used), functionality: fully functional, operating hours: 6,223 h, CASE CX290B Crawler Excavator Kawasaki Hydraulics, Isuzu Engine Technical specifications: Rsdpfx Ajygy Awjpdjch - Engine: Isuzu AH-6HK1X (6-cylinder, turbocharged, common rail) - Engine power: approx. 154 kW (209 HP) at 1800 rpm - Operating weight: approx. 29,100 kg - 30,000 kg (depending on equipment) - Hydraulic system: Variable displacement piston pumps (Kawasaki) ensuring smooth combined movements - Maximum digging reach: approx. 10.5 - 10.7 m - Maximum digging depth: approx. 7.1 m - Bucket capacity: standard approx. 1.2 - 1.6 m³ - Hours: Original 6,223 operating hours – well-maintained machine, regularly serviced, hour meter fully functional and legible Advantages of the CX290B model: - Hydraulic quick coupler: Fast and efficient attachment change without leaving the cab - Full hydraulic circuit: Equipped with additional lines on the boom for hammer, shear, or grapple operation - Cab comfort: Spacious cab with excellent visibility and air conditioning - Durability: Heavy Duty undercarriage designed for tough working conditions - Electronics: Control system offering multiple operating modes (H, S, E) for optimized fuel consumption Condition: Machine as shown in photos; tracks and undercarriage in good condition. Ready for testing on site.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: Rcjdertrvyopfx Apdjh -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Rcsdpfoxfrv Eox Apdsh Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. Rcedpfxsubbrtj Apdsh While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money!

Year of construction: 2022, operating hours: 0 h, condition: new, Carrier weight: 20-33 tons Operating weight: 1800 kg Oil flow rate: 130-180 l/min Oil pressure: 150-170 bar Chisel diameter: 140 mm Rsdjiwxnvopfx Apdoch Impact frequency, Auto Start / Auto Stop mode: 400-800 bpm Sound power level: 120 db(A)

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Rjdpfx Aevupcrspdoch Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: good (used), fuel type: diesel, General information Year of manufacture: 2012 Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Rcjdpfx Ajx H Nlispdeh Location: 41468 Neuss immediately available

Condition: used, Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction via this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Redpfjgyw S Tjx Apdoch Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: Universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850   You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, mileage: 112,000 km, power: 62 kW (84.30 HP), first registration: 11/2014, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, VAT deductible EURO 5 - Facelift Please no emails / no emails Due to time constraints, emails cannot be processed – thank you for your understanding! Further vehicles in stock: !!! Wide selection !!! !!! Regularly changing stock of Volkswagen T5 Transporters !!! VAT deductible Opening hours and further information: Viewing and purchase without appointment possible: MON – THU: 9:00 am to 4:00 pm FRI: 9:00 am to 1:00 pm SAT: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch For queries: Christian Hirsch Please try multiple times, as we are often in customer consultations. More offers at ---- More T5 Transporters in stock Prices: Price depends on: - Mileage - Visual condition - Technical condition - TÜV due / New MOT - Service due - New service - 1-seater - 2-seater - 3-seater ---- VAT deductible VAT deductible For questions: Christian Hirsch !!! Emails will not be answered !!! For questions: Christian Hirsch For queries: Christian Hirsch Rcsdpsvh S Epjfx Apdsh Please try several times, as we are often in customer discussions. ---- Opening hours and further information: Viewing / purchase without appointment possible: MON – THU: 9:00 am to 4:00 pm FRI: 9:00 am to 1:00 pm SAT: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Please no emails / no emails Due to time constraints, emails cannot be processed – thank you for your understanding! ---- More vehicles in stock: VAT deductible For inquiries: Christian Hirsch Special equipment: Cab flooring: rubber, Electric package 1, Tailgate with window, Heated rear window with wiper, High partition wall with fixed window in the cargo area, Multifunction display / on-board computer, Combination instrument with 2 displays, Rear park distance control, Smoker package, Spare wheel with matching tyre, Sliding door, left side (cargo/passenger compartment), Mud flaps front and rear, Upholstery/seat covers: Robust seat covers, Cab seats: lumbar support (driver's seat), Trim panels in the cargo/passenger area: half-height hardboard trim Additional features: Driver/passenger airbags, Outside mirror aspheric (left), Outside mirror convex (right), Assistance system: brake assist (HBA), Vehicle without windows in cargo/passenger area, Vehicle without child lock in cargo/passenger area, Bodywork: van, Body variant: standard roof, Headlight beam adjustment, Truck registration, Engine 2.0 litre – 62 kW TDI, Pollen filter, Wheelbase 3,000 mm, Euro 5 emission standard, H4 headlights, Sliding door right (cargo/passenger compartment), Cab seats: adjustable passenger seat, Cab seats: adjustable driver seat, Seats in cargo/passenger area: first row omitted, Heat-insulating glazing, Permissible total weight 2.80 t ---- More offers at Equipment list determined via VIN inquiry, technical errors may occur Details provided online are non-binding descriptions and do not represent guaranteed characteristics. Seller is not liable for typing or data transmission errors / changes / input errors. Subject to errors and prior sale. Special equipment: Cab flooring: rubber, Ele

Condition: new, Unused bin washer. Bought for a contract which never materialised. Rcsdpfx Apetpv T Nodjh