Used Guide Fence for sale (5,429)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 RPM Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Podozul Tcspfx Ahcora Control system operating hours: 24,164 h Operating hours: 10,295 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of XYZ axes Parameter back-up function Retraction cycle for tapping without a collet MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Thread cutting without a collet M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycles G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Check of travel limit before movement Check of stored travel limit 1 Check of stored travel limit 2 G22/G23 Customer PMC Real-time customer macro

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control Pedoztl Scopfx Ahcera - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 1990, functionality: fully functional, Paoloni TT20-I Circular Saw Milling Machine S/N 00005/90 Year of construction 1990 Manufacturer Paoloni Macchine S.p.A. Italy Saw blade diameter max 350 mm Prjdpfx Ahotq Ivlecsa Aluminum carriage with V-guide carriage length 2.100 mm rip fence 125mm Support table up to 340cm Saw blade tiltable 45 degrees scoring unit 125mm, 1 HP Cutting height max 110mm Motor 5.5 HP Speeds: 3000/4500 / 6000 Table milling machine Spindle diameter 30mm for tenon cutters Spindle stroke 180mm max table opening 340mm motor 5,5 HP 5 different speeds (adjustable with belt pulley) 2500-8500 RPM weight 1300 kg

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Prodpfx Aozul Utjhcea Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-20-8714, functionality: fully functional, Equipment: CE marking, documentation/manual, KDF 860 Edition, serial no. 0-261-20-8714, year 2016 Feed speed 8–20 m/min, rounding 20 m/min, workpiece width 70 mm, (8–22), minimum workpiece length 140 mm, CONFIGURATION: - Pre-milling - Spray separator - EVA adhesive application with QUICKMELT top preheating, Second glue pot A12 EVA (white glue) - Infrared workpiece heating - Side pressure (4 rollers; The first pneumatical) - Trimming with SOFTTOUCH function (smooth unit start-up); straight/angle trimming, exact/with overlap - Multifunctional multi-profile milling unit (R1 + R2 + chamfer); servo-adjustment - 2-motor SERVOTRIM rounding unit—controlled by linear motors on both axes, feed rate up to 20 m/min, soft-touch function for gentle contact of the unit with the workpiece, 4x servo-adjustment - Profile scraper unit – 4x servo-adjustment, dual-profile (R1 + R2) profiling guides with 0.01 mm step Pjdpfxozuxh Hj Ahcjra - Flat scraper unit, - Spray cleaner - Brushes, - Motorized beam lift, - Motorized infeed fence, - Full automation, - POWERTOUCH control system, - moveable workpiece support, - loading guide for narrow parts - upper belt pressure

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Prsdpozul Tvsfx Ahcea Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Psdpfx Aezrl A Eehcera Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: excellent (used), Year of construction: 1995, Combined surfacing and thicknessing planer from Hofmann with the legendary Leitz-Wigo spiral cutterhead, very robust machine construction in a compact design. A special feature of this machine: the surfacing table does not need to be folded up for thicknessing, so no conversion is necessary. Equipped with a "real" spiral cutterhead. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel serrated steel feed roller rubber-coated feed roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Predpfoztkyxox Ahcja Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife cutterhead with spiral, re-sharpenable HSS knives Two sets of spiral knives are included, each installed in matching clamping blocks. Re-sharpening is done by a sharpening service; the sharpened knife sets are then simply screwed into the cutterhead without any adjustment work. Slotted table lips Planer cutterhead guard Suvamatic Fence swivels with a rip fence Concave and pointed fence adjustment for the surfacing tables Rod for hanging the dust extraction hood Dust extraction port 2 x 160mm Only a few touch-up spots V-belt renewed Knives sharpened Rubber feed roller renewed Operating manual CE marking No scratches on the tables. Thickness table with two adjustable table guide rollers Dimensions approx. 2520 x 1200 x 1200mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Condition: Well-maintained (from a public facility) Design: Table size: 1255 x 900 mm Table height: 900 mm Table opening: 305/225/160/105/72 mm Weight: 1150 kg Spindle speeds: 3000/4500/6000/9000 RPM with belt-driven quick-change system Indicators: electronic spindle speed display, digital (LED) for spindle height (absolute and relative), as well as for swivel angle; automatic display of the correction value for milling depth; double operating hour counter for total and batch run times Milling spindle: electrically swiveling +/- 45, 50° via button; electrically adjustable height with rapid and slow traverse; with steep taper SK 40; collet chuck, quick-change system incl. torque wrench; wear-free, electrically braked; electropneumatic locking via selector switch Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm at 7.5/9.5 kW Milling fence: aluminum milling fence, hard-coat coated with holder for groove plate or guide rails Handwheel adjustment according to mechanical digital counters; separate adjustable run-in basin; workpiece diameter max. 250 mm Extraction: twice 120 mm diameter Maintenance device: central lubrication via pump, lubrication of the milling spindle via grease quantity regulator Accessories: milling arbor 30 mm, wrench, torque wrench for collet chuck system, oil press, grease press, ball bearing for run-in ring 62 mm, groove plate, arc milling guard FRS 95 for milling operations on the run-in ring with extraction nozzle and feed strip Electrical design: lockable main switch, automatic star-delta starter, electrically wear-free brake, connection for extraction control, undervoltage protection; CEE three-phase connection for feed unit (= 5-pole socket) Emission values: noise levels according to prEN ISO 11202; workpiece diameter 125 mm, Z=2, n=6000 RPM Workplace emission: Idle noise (without extraction) 68.6 dB(A) Operating noise (with extraction) 84.6 dB(A) Work at the milling fence - feed side max. 0.34, removal side max. 0.28 With slot hood - feed side max. 0.21, removal side max. 0.20 Minimum air flow rate for both extraction nozzles: 24 m³/min at 1000 Pa Prsdpfxozw Rvzs Ahcsa Special equipment: Model T26, 5/6 kW (6.8 / 8.2 HP) design with CPS - Type Gamma V protective device; equipment with Centrex type protective device; swiveling control panel with control buttons and digital display for milling spindle swivel and spindle up/down with relative and absolute position display and automatic display of the correction value for the milling depth during swiveling; necessary if a feed unit is installed to the right of the milling fence. Milling fence with resettable mechanical digital counter for total adjustment Integral fence 650 and 500 mm long with filler bar Support for feed unit (can be swiveled away) with motorized height adjustment (for machines with control panel) Milling arbor SK 40, 30 mm diameter, clamping length 140 mm (200 mm tool diameter) Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Prjdpfszi Nhmsx Ahcea Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, Predpfxsvuhumj Ahcja either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Prjdpfozu Ryhsx Ahcea Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 145 mm, turning diameter: 240 mm, travel distance X-axis: 130 mm, travel distance Z-axis: 145 mm, Horizontal, twin-spindle CNC lathe with 2 turrets in two working areas and 2 loading portals! The machine underwent an overhaul in 2023! TECHNICAL DETAILS Prodpfx Ajztxlcehcea Turning diameter max.: 240 mm Turning length max.: 145 mm Travel X-axis: 130 mm Travel Z-axis: 145 mm Distance between spindles: 340 mm Rapid traverse X/Z-axis: 24 m/min Guidance X-axis: Roller linear guide Guidance Z-axis: Round guide, 145 mm Number of spindles: 2 Spindle drive power: 11 / 7.5 kW Max. spindle speed: 4,500 rpm Torque: 93 Nm Spindle nose: JIS A2-5 Chuck size: 210 mm (8 inches) Number of turrets: 2 Turret type: BT turret Tool positions per turret: 8 Shank size for external turning tools: 20 × 20 mm Max. shank diameter for boring bars: 40 mm MACHINE DETAILS Control: Fanuc 32i-B Working areas: 2 Power connection: 30 kVA Dimensions & Weight Footprint: 4,500 × 2,440 mm Overall height with loader: 2,550 mm Weight: 4,400 kg Loading portal GT Twin with two independent portals Dual gripper for raw and finished parts Turning station Control unit with cable Max. workpiece diameter: 120 mm Max. workpiece length: 80 mm Max. workpiece weight: 3 kg EQUIPMENT Stack magazine, on the left side Parts conveyor belt, on the right side Chip conveyor, on the rear side Coolant tank Coolant supply through both spindles for flushing the clamping devices Various tool holders Various clamping devices Documentation and wiring diagrams

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). Prodpfx Ahozt Ai Eecea with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw Prjdpfx Aszuw E Rjhcea - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm Predexw T Ugepfx Ahcoa - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Pjdpfx Ahszdza Djcjra Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: excellent (used), Technical data: Track width: 300 mm Max cutting height: 140 mm Variable feed speed adjustment Automatic lubrication system Anti-kickback protection Guide fence (Culaga) Safety switch Power supply: 380 V Total power: 33 kW Overall dimensions: Length: 1650 mm Width: 2000 mm Height: 1550 mm Podpfxew Ng H Uj Ahcera

Condition: excellent (used), CATALOGUE NUMBER 7998 Technical data: - spindle diameter 30mm - spindle working height 120mm - interchangeable spindle - spindle locking - adjustable up/down - original cast iron guide with full adjustment - original cast iron carriage with material clamping device + angle fence - 4 types of rotational speeds + right/left 3000, 4500, 6000, 9000 rpm - table dimensions 1020x1000mm - angle fence on the table - with brake - motor 5.5kW - dust extraction port diameter 100mm, 120mm - dimensions (L/W/H) 2200x1320x1310mm - weight 966kg Advantages: - Polish production - side carriage - angle fence on the table and on the side carriage - used milling machine, very good condition Prsdpfxezrw U Hj Ahcsa Net price: 13900 PLN Net price: 3310 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: Prodpfx Aozh H N Eshcoa - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch Prsdpfeztpw Njx Ahcoa - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Pjdpfex Igzqsx Ahcera Weight: 800 kg

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm Prsdpfx Ahjzuyx Hecja PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2024, pressing force: 64 t, CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details. • Inspection possible: Yes, in Bulgaria • CNC control • Control system: E-Touch ET18 (E-Touch 18) • Programming: 2D graphical programming, CAD import, offline programming • Remote assistance: Yes • Automatic bending-process calculation: Yes • CNC axes: 4+1 (Y1, Y2, X, R + V motorized crowning) • Main technical specifications • Distance between columns: 1,980 mm • Throat depth: 300 mm • Ram stroke: 160 mm • Maximum open height: 370 mm • Repositioning accuracy: ±0.05 mm • Fast approach speed: 200 mm/s • Bending speed: 10 mm/s • Return speed: 180 mm/s • Main motor power: 7.5 kW • Axes / backgauge • Y1/Y2: Fully synchronized • X-axis: CNC controlled • R-axis: CNC controlled Psdpfozu Swnsx Ahcera • V-axis: CNC motorized crowning • Backgauge: Servo controlled • Main components • Hydraulic system: Bosch Rexroth • Main motor: Siemens • Electrical components: Schneider Electric • Ball screws / linear guides: HIWIN • Linear scales: GIVI (Italy) • Tubing / connectors: EMB (Germany) • Sealing rings: NOK (Japan) • Hydraulic pump: Sunny (USA) • Safety and compliance • Motor overload protection • Electrical leakage protection • CE safety standard Additional equipment • 1 set upper punch (heat-treated 42CrMo) • 1 multi-V lower die (heat-treated 42CrMo) • Quick-release upper tool clamps • 2 front support arms • Foot pedal with emergency stop • Safety fence Technical Specification Bending Length 2500 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 18 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,500 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5,000 rpm, total length: 7,250 mm, total width: 4,460 mm, total height: 1,770 mm, overall weight: 923 kg, table height: 900 mm, Equipment: documentation/manual, saw blade guard, scorer, • Electronically programmable circular panel saw for professional woodworking, combining the highest precision and user-friendliness. • Sliding table with aluminum roller table and hardened precision guides for consistently accurate cuts. • Flexibility: Manual, semi-automatic, and fully automatic operation possible. • Rip fence carriage with CompeX device, anodized aluminum profile with guide made of hardened, ground, and dovetailed steel guides. • Scoring unit with independent motorization, adjustable from the outside, and stops for easy saw blade positioning. • “SCM Thundercut” optimizer/sequencing control app for tablets. • Electronic 2-axis control: Vertical adjustment and tilting of the saw unit. • Eccentric clamping device. Psdpfxezvd T Ds Ahcjra • Electronic display of the parallel fence position.