Used Building Construksion for sale (1,939)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Auction of a fully demountable, multifunctional commercial hall! TECHNICAL DETAILS Dimensions Hall 1: Width: 22 m Length: 70 m Height: 6 m Dimensions Hall 2: Width: 23 m Dusdpfx Asx T Dgzjc Nen Length: 20 m Height: 6 m Roof insulation: EPS approx. 100 mm FEATURES 3 doors & gates Walls: Interior chambered sections filled with insulation bags, cladded with steel trapezoidal profile sheets Steel deck profile sheet roof Secondary steel structure: steel frames and columns Purlins Wind bracing for structural rigidity Note: Approximately 4 trucks are required for transport. The roof sections have a transport length of around 10–15 meters. For the longest components, a truck with an 18-meter loading length will likely be needed.

Condition: good (used), Commercial building for sale Dimensions: • Width: ± 18.5 m • Length: ± 50 m • Gutter height: ± 3 m • Ridge height: ± 7.5 m • Total floor area: ± 925 m² The purchase includes: • Steel structure • Sandwich panels • Sandwich facade panels • Wooden purlins Drawings and calculations available. Dsdpfx Aex Uz N Nec Noun Price information: • Sale price: on request via email • Price excludes loading and transport More information: For photos, videos, drawings, or additional details, please contact via email. Viewing by appointment only.

Condition: good (used), Resteel Solutions B.V. offers: a demountable commercial building with a surface area of 2,352 m² Dujdpfx Acsxz R Dms Nen 42 m wide, 56 m long, 12 m high. Dismantling is scheduled for the end of January 2026. We can deliver this building to your construction site. Visit our website or YouTube channel for more information and a rapidly changing selection of commercial buildings and steel structures.

Condition: good (used), - Mitre cut length (mm): 100 - Adhesive medium: hot melt adhesive - Automatic composition: of frame parts Dedjm Sfnepfx Ac Neun

Condition: new, power: 30 kW (40.79 HP), overall weight: 6,000 kg, Year of construction: 2025, Applications of Our Sand & Gravel Solutions Our stone crusher systems are being used globally across a wide variety of projects, including: Road and highway construction Concrete production plants Railway ballast production Landscaping and drainage Infrastructure development Recycling applications Building waste recycling, construction waste management, construction and demolition debris recycling and management. Our Range of Stone Crusher Solutions We understand that every sand and gravel project is unique. That's why we offer a variety of stone crushers, each tailored to different material types, capacities, and final product sizes. 🛠️ Jaw Crushers Perfect for primary crushing, our jaw crushers handle large rocks and break them down into smaller, manageable pieces. They are known for: High reduction ratios Rugged construction Easy maintenance Versatile applications 🛠️ Cone Crushers When you need finely crushed material, cone crushers are your go-to solution. Ideal for secondary and tertiary crushing, they deliver: Uniform product size Superior cubicity High capacity Excellent wear resistance 🛠️ Impact Crushers If you’re handling softer, non-abrasive materials or recycling concrete and asphalt, our impact crushers are the ideal choice. They offer: High-speed crushing Shape optimization Adjustable output size Easy mobility (in some models) 🛠️ VSI (Vertical Shaft Impact) Crushers For top-tier manufactured sand production, VSI crushers offer the precision you need. They deliver: Consistent sand shape and size Dsdpjq Igumsfx Ac Neun Energy efficiency Superior fines production Low operating costs 🛠️ Screening and Conveying Systems No crushing operation is complete without effective screening and material handling. Our solutions include: Vibrating screens Conveyor belts Washing systems

Condition: new, functionality: fully functional, Year of construction: 2025, Small stone jaw crusher with vibrating screen powdered by diesel engine Max input size: 210mm Capacity: 15-22 t/h Output size: 0-5mm, 5-10mm, 10-22mm, 22-31mm Dujdsq I Nviepfx Ac Njn Diesel engine: 28HP

Condition: good (used), - High frequency - Mitre cut length (mm): 100 - Gluing medium: white glue - Gluing of frame parts Duodpfx Acjm Sfqj Nsn

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI Chalet Building Machine / Log House Production Line Type CM 40 POS 1: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kw motor, length 6000mm POS 2: Longitudinal cutting saw diameter saw blade 400mm Pneumatic feed of the saw depth Main motor 4,0 kW POS 5: KKRÜSI RÜSI chalet building machine / log house finishing machine type CM 40 Machine-No.431 Year of manufacture 1996 Sawing unit: Manual feed spindle adjustment with analog dimension display CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display Drilling unit: Manual feed Djdshw N Npopfx Ac Neun Spindle adjustment with analog dimension display Face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display POS 6: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kW feed motor length 12000mm 9 pcs. stop flaps, adjustable, pneumatically controllable 10 pieces sideshift for material transfer POS 7: assembly table 4.400mm x 12.000mm Manufacturer: Sweden Year of manufacture approx. 1985 Assembly table for further processing of the manufactured log house planks. 4 chain hoists for cross transport gear motor with 4,0 kW

Condition: used, functionality: fully functional, overall weight: 18,000 kg, first registration: 08/2010, Obermaier OD2 L180L Construction Material/Flatbed Trailer GFA Gothaer axles with disc brakes Air suspension with lift/lower function Dusdjxk S T Iopfx Ac Njn DuoMatic air connection ABS/EBS 15-pin electrical connection Aluminium side walls Aluminium floor Tyres 385/65 R22.5 Permissible total weight 18,000 kg Curb weight 3,900 kg

Condition: used, For more technical data, please contact the seller. Djdeh A I S Ajpfx Ac Njun

Condition: good (used), Year of construction: 1985, functionality: fully functional, Chalet construction machine for log house production Year of manufacture: 1985 Manufacturer Norway / Finland Workpiece height max. 200 mm Workpiece width max. 250 mm 1. Face groove milling unit Cutter diameter max. 220 mm Cutter width max. 60 mm Motor 2.2 kW, 2900 rpm Pneumatic feed 2.Drilling unit Clamping diameter max. 16 mm Drill diameter max. 16 mm Motor 1.1 kW 1450 rpm 3.Horizontal milling unit Cutter diameter 210-240 mm Cutter width 40-100 mm 2 motors each 2.2 kW, 2900 rpm Vertical milling unit Cutter diameter 210-240 mm Cutter width 40-120 mm 2 motors each 2.2 kW, 2900 rpm Hydraulic feed, hydraulic unit with 3.0 kW with 2 x 4 pneumatic workpiece clamps Pneumatic pressure 7 – 10 bar Air consumption Nm³/h 8 Operating voltage 380 V, 50 Hz Dimensions Duodpfx Acev Dxn As Nsn Machine width 2700 mm Machine depth 1830 mm Machine height 2180 mm + hydraulic unit L x W x H = 0.8 m x 0.36 m x 0.8 m Weight 1,500 kg

Year of construction: 2019, condition: excellent (used), KAESER / TE 121 and BSD 72 Compressor system and dryer and with distribution system to machinery S-COM-005 Dsdpfjvzhgijx Ac Njun TESEOAIR / HBS50 15 Bar Compressed air system HBS50 max 15 Bar - 220 Psi - Max 15 MPa S-COM-008

Condition: used, Year of construction: 1983, machine/vehicle number: 213302/1, Tower crane - Liebherr Type: 33K Duodpfxsv N E Nds Ac Non

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation Duodpfx Aoir Id Uoc Njn C-axis on: main spindle and counter spindle Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 🚨 FOR SALE: 2x Kardex XP500 Machines – Top Condition! 🚨 For sale for removal. We are building a new warehouse and do not require these units. In good condition, recently serviced, well maintained throughout the time we have owned them. Price is per unit, negotiable. Shelves can be easily reconfigured to accommodate different product types / sizes. Bins can be sold with machines if desired. Machines are currently configured for dual tray presentation. Also includes 10-bay Kardex SortBench. Dedpovuvbzsfx Ac Neun Details: Model: Kardex XP500 Quantity Available: 2 units Condition: Well-maintained and fully operational Key Features: High-density storage to maximize space utilization Fast and reliable picking system for enhanced productivity Built for heavy-duty industrial applications Ergonomic design to improve workplace safety Energy-efficient operation Why Kardex XP500? These machines are perfect for businesses looking to improve efficiency, save floor space, and boost order-picking accuracy. Location: The units are currently stored in Wanganui, New Zealand.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod mounting: Ø 75 mm -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1800/200/H120 mm Dedpfxob A Rr Ro Ac Njun -Weight: 110 kg

Condition: used, axle configuration: 2 axles, first registration: 11/2008, loading space length: 10,550 mm, loading space width: 2,490 mm, loading space height: 2,630 mm, total length: 11,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,510 mm, color: other, Year of construction: 2008, Equipment: ABS, tail-lift, = Further options and accessories = - EBS - Tail lift - Central lubrication = Notes = Number of axles: 2, Payload: 38,000 kg, Unladen weight: 8,000 kg, Gross weight: 46,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Central lubrication, Suspension type: Full air suspension, ABS, EBS, Year of body build: 2008, Axle type: BPW, Tail lift, Tail lift execution: Rear flap, Tail lift capacity: 2,000 kg, Tail lift manufacturer: Palfinger, Tail lift material: Steel, Tail lift size: 200x250, Battery for ramp = Further information = General information Cab: Day Registration: OK-29-SX Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Left tyre tread: 7 mm; Right tyre tread: 7 mm Axle 2: Steering; Left tyre tread: 8 mm; Right tyre tread: 9 mm Weights Unladen weight: 8,000 kg Payload: 38,000 kg Gross vehicle weight: 46,000 kg Functionality Tail lift: Palfinger, rear flap, 2,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy at Kleyn Trucks? Easy! • Large, fast-moving stock • Recognizable quality • Competitive pricing • Professional business practice • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly Duedpfx Acjyh Uhzj Njn • Expert technical services • The security of ‘recognizable quality’ • And much more… Please visit our website for special offers and the full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty packages.

Condition: used, mileage: 225,000 km, power: 115 kW (156.36 HP), first registration: 07/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, loading space height: 2,100 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Special equipment: Storage compartment on the dashboard with USB port, audio system: radio with MP3-compatible CD player, USB and Bluetooth hands-free system, long exterior mirrors for vehicle width 2350 mm, rear axle suspension: parabolic (reinforced, stage 2), automatic climate control, spare wheel with road tires, spare wheel holder between longitudinal floor beams. Additional features: Driver's airbag, trailer socket pre-installation, traction control system (ASR), model: S-Series, electrically adjustable and heated exterior mirrors, brake assist, electronic brakeforce distribution, front axle suspension: transverse leaf spring, tinted windshield and side windows, 150 A alternator, speed limiter system 160 km/h, bodywork/build: standard dropside, combination instrument with pixel matrix display, fuel tank: 70 liters, headlight range adjustment, engine 2.3 liters - 115 kW diesel, radio pre-installation with speakers, wheelbase 4100 mm, low emissions according to Euro 6 standard, cab seats: front passenger double seat with headrests, service indicator, permitted gross weight. Original paint: Yes Cab size: Standard transporter cab Condition | Exterior | Front: Age-appropriate Condition | Exterior | Rear: Age-appropriate Condition | Exterior | Driver side: Age-appropriate Condition | Exterior | Passenger side: Age-appropriate Condition windshield: No damage Condition | Interior | General: Well-maintained Interior fitting material: Fabric Comfort systems: Air conditioning Seat condition: Well-maintained Duodpoyh Ic Sefx Ac Non Functionality of comfort systems: All functional Bodywork Bodywork dimensions Internal length: 4200 mm Internal height: 2100 mm Tail lift Tail lift brand: Sörensen Max. load capacity of tail lift: 500 kg Payload: 1000 kg The vehicle is in good condition! New TÜV and emissions inspection available for an additional charge. Financing possible through Santander Bank.

Condition: used, mileage: 54,000 km, power: 92 kW (125.09 HP), first registration: 10/2015, fuel type: diesel, overall weight: 2,900 kg, next inspection (TÜV): 10/2027, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special Equipment: Passenger-side airbag, audio system: radio/CD player with multi-function display, rear wing doors with windows, front and rear parking sensors, tire repair kit, left-side sliding door to load/passenger compartment, Visibility Package 1 Dusdpfxjyh Ibuj Ac Nsn Additional Equipment: Second battery, driver’s airbag, traction control (ASR), basic trim, integrated indicator in exterior mirrors, vinyl flooring in load/passenger compartment, onboard computer, electronic brakeforce distribution (EBD), hill start assist, cabin air filter: pollen filter, body/build: standard high-roof panel van, body variant: medium-height roof, high bulkhead behind driver and passenger (without windows, with lower through-loading option), steering column (steering wheel) adjustable for height and reach, truck registration, engine 2.2 L - 92 kW TDCi CAT, wheelbase 3300 mm, low emission according to Stage 5 / Euro 5 emissions standard, H4 headlights, right-side sliding door to load/passenger compartment, front and rear mud flaps, side protection strips, Seating Package 4: driver’s seat (3-way adjustable) – double passenger bench, fabric, partially painted bumpers, tinted glazing, half-height panel trim in load/passenger compartment, lashing rails on sides in cargo area. Trailer load: 2,800 kg Payload: 945 kg TÜV until 10-2027 Service booklet at Ford: last inspection at 49,018 km The vehicle is in very good condition! Financing possible through Santander Bank.

Condition: used, Year of construction: 2011, machine/vehicle number: CA77, Technical Specifications & Performance Data Duodeyh E Hzopfx Ac Nen The Robino & Galandrino Minibloc is a compact capsuling machine engineered for precise capsule application in beverage production and industrial packaging environments. Designed for integration into a used bottling line or as a standalone unit, this second hand machine combines reliable mechanics with efficient operation for consistent results on glass bottles commonly used in wine and premium beverage applications. Manufacturer: Robino & Galandrino Model: Minibloc Year of manufacture: 2011 Machine type: Capsuling machine Electrical supply: 400 V, three-phase Frequency: 50 Hz Input current: 1.2 A Frame concept: Compact miniblock layout for efficient floor space usage Advanced Automation & Control Systems Built to match modern beverage production requirements, the Minibloc supports dependable automation with straightforward operator controls. The three-phase 400 V, 50 Hz electrical setup ensures stable performance and compatibility with standard industrial power networks. Safety protections and operator-friendly adjustments help maintain productivity while reducing downtime. Operator controls engineered for practical, daily operation Electrical system: 400 V 3-phase, 50 Hz Safety interlocks and guards for protected operation Mechanical quick adjustments to support format changes Production Line Integration Capabilities This capsuling machine integrates seamlessly after cappers, corkers, wirehooders, or labelers within a bottling line. Its compact frame is well suited to retrofits in existing packaging machinery layouts and to diversified beverage production scenarios. Inline or standalone operation within a used bottling line Compatible with conveyors and standard line controls Format adjustments for varying bottle heights and diameters Ideal for integration in wine and premium beverage packaging Machine Condition & Maintenance History The 2011 Robino & Galandrino Minibloc is presented as a professionally maintained second hand capsuling solution suitable for immediate inclusion in beverage production and industrial packaging processes. It offers a dependable build quality typical of Robino & Galandrino engineering. Condition aligned with ready-for-operation expectations Robust construction supports long service life Operational Performance & Versatility Engineered for consistent capsule application, the Minibloc supports smooth feeding and stable spinning for a clean, uniform finish around the bottle neck. It is commonly configured for PVC shrinkable plastic capsules and polylaminate aluminum capsules used in still wine, fortified wine, and premium beverages. Precise capsule placement and secure finish Configurable for different capsule materials and bottle designs Stable mechanics designed for continuous-duty operation Installation Requirements & Site Preparation Site preparation is straightforward thanks to its compact footprint and standard utilities. Ensure suitable electrical service and...

Condition: used, operating hours: 54,000 h, machine/vehicle number: LC597, Technical Specifications & Performance Data This used bottling line is engineered for reliable beverage production and downstream industrial packaging at up to 8,000 bph. The configuration integrates APE Impianti case handling with KOSME labeling technology, offering robust performance for second hand applications and flexible format management typical of glass and PET bottle operations. Production speed: 8,000 bottles per hour Compatible formats: Typical case pack pattern includes 12 x 0.75L; additional formats manageable with change parts Containers: Designed for bottle handling; configuration suitable for PET and Glass (cylindrical containers) Labeling modules: KOSME STAR 720 12T (cold glue), KOSME EXTRA ADHESIVE 12T S3 E3 (self-adhesive) Packaging modules: APE FORMA 2000 (case erector), APE INCA 2010 (case packer), APE INSER 2001 (divider inserter) Electrical (labelers): 400 V, 50 Hz; installed power 4 kW (STAR 720 12T) and 8 kW (EXTRA ADHESIVE 12T S3 E3) Weights (labelers): 2650 kg (STAR 720 12T), 2000 kg (EXTRA ADHESIVE 12T S3 E3) Compliance: CE-marked components Advanced Automation & Control Systems The line leverages modular automation across labeling and case-handling stations for stable throughput. Operator-friendly controls on each module support quick setup and changeover. The KOSME labeling machines feature standardized European electrical specifications (400 V, 50 Hz) and balanced installed power to ensure precise label application at line speed. APE Impianti packaging modules provide synchronized motion and interlocked safety protections for downstream operations. Integrated start/stop logic and line accumulation to stabilize flow Fast mechanical adjustments for changeovers with guided setup steps Interlocked guards and emergency stops on major equipment Clear HMI/controls per machine for format selection and diagnostics Production Line Integration Capabilities This production line is designed to operate inline with conveyors and accumulation to match the 8,000 bph target. The dual-labeling architecture—cold glue and self-adhesive—supports a wide range of label materials and presentation standards. Case forming, partition insertion, and packing are fully integrated for efficient end-of-line handling, enabling consistent case quality for logistics and storage. Inline configuration with upstream/downstream equipment compatibility Cold glue and self-adhesive labeling flexibility for front/back and wrap-around applications Dujdpfoyh E Husx Ac Njn Case erecting, divider inserting, and packing for 12 x 0.75L patterns Suitable for multiple bottle sizes with appropriate change parts Machine Condition & Maintenance History This is a second hand, pre-owned bottling and packaging solution with component build years ranging from 1998 to 2016. The equipment is CE-compliant and represents proven European engineering for beverage production. Standard preventive maintenance routines, lubrication points, and wear-part kits are typical for these models, supporting reliable recommissioning. Operational Performance & Versatilit...

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Hari, We offer the following services, DIN standard EN 1090 / EX-3 Steel construction Planning and advice on construction as well as production and assembly for steel structures of all kinds in industry, trade and public institutions. A high quality standard for all our activities is our claim. Services: - All types of structural metalwork - Canopies and roofing - Stage constructions - Railings of all kinds - Window grilles, decorative grilles, grilles - Customized steel and stainless steel constructions - Staircase constructions, escape staircases - repairs Welding work Thanks to our comprehensive know-how and extensive technical equipment, we are the right partner for demanding welding work. Our range of services includes - MIG / MAG - TIG - electrode - Autogenous Interior fittings Dodeu Szvaopfx Ac Nsun From consultation, measurement and planning to turnkey handover, we support you reliably and competently. - Conversion / drywall construction - Renovation of old buildings - Free on-site inspection - Painting work - Tiling - doors - Ceiling systems / suspended ceilings - Lighting

Condition: used, mileage: 173,139 km, power: 125 kW (169.95 HP), first registration: 05/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,029 mm, total height: 2,786 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, 0847. GW25NY35321 Special features: Second battery, passenger airbag, Audio System 21: Digital radio reception (DAB/DAB+) with 8" multifunction display, programmable battery monitoring, bi-xenon headlights with cornering light, vehicle without vinyl flooring in cargo/passenger compartment, LED cargo area lighting, fog lights with static cornering light, tire repair kit, Visibility Package 3, Seat Package 9/15: driver's seat (4-way adjustable) - double passenger seat including seat heating, fabric upholstery, steel wheels 6.5x16, high side paneling in cargo/passenger compartment. Dodpfxsxrib Es Ac Nsun Additional equipment: Overhead storage in driver cab, Trailer Stability Program (TSA), Audio System 13: digital radio reception (DAB/DAB+) with 4" multifunction display, electrically adjustable and heated exterior mirrors, integrated turn signal in exterior mirrors, on-board computer, entry lighting, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: emergency brake assist, driver assistance system: crosswind assist, FordPass Connect incl. eCall, rear wing doors (opening angle 180 degrees), heating with recirculation, body/build: standard high roof panel van, body variant: medium-high roof, radiator grille with chrome trim, steering column (steering wheel) height and reach adjustable, engine 2.0 L – 125 kW TDCi CAT, My Key (second programmable vehicle key), front and rear parking assist system, digital radio reception (DAB+), wheelbase 3,750 mm, low emissions according to Euro 6d-TEMP, gear selector/leather shift knob, windshield wipers with adjustable intervals, sliding door cargo/passenger compartment right, rear mud flaps, side protection moldings, start/stop system, Trend, integrated rear step, securing lashing eyes (10), roll stability control (RSC), slightly tinted heat-insulating windows, additional electric heater, second foldable remote key...and much more. Subject to errors and prior sale.

Condition: good (used), axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,680 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Curb weight: 6,160 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body build year: 2021, Customs rope, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day Registration: KLEYN1 Duodeyhv Ixopfx Ac Non Driveline Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tire tread: 12 mm; Right tire tread: 13 mm Axle 2: Left tire tread: 14 mm; Right tire tread: 14 mm Axle 3: Left tire tread: 13 mm; Right tire tread: 12 mm Weights Unladen weight: 6,160 kg Payload: 32,840 kg GVW: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good prices • Fair and professional dealing • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty packages.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 6,276 h, load capacity: 10,000 kg, lifting height: 3,400 mm, fuel type: gas, mast type: simplex, construction height: 2,650 mm, fork carriage width: 1,560 mm, fork length: 1,600 mm, empty load weight: 17,500 kg, total length: 3,100 mm, drive type: Treibgas, construction width: 1,535 mm, Compact forklift - LPG Load center: 600 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Cushion tires Front tire size: 840/356-569 Rear tire type: Superelastic Rear tire size: 280/50-15 Description: In addition to this RMF model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks & side loaders in stock at our warehouses in Hamburg and Gdańsk. Visit our website - sago-online. Leasing & financing under attractive conditions are always possible for us. We are also happy to purchase your used vehicle outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this KSBL100G. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Dodpfx Asx Dnzbsc Njun