Used Manual Press for sale (25,703)

Condition: good (used), Year of construction: 1998, functionality: fully functional, PLEASE NOTE: If you purchase on August 10, 2026, or August 11, 2026, you will receive an additional discount. Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 Max. wire diameter: 12 mm Max. wire cross-section: 115 mm Knodpfozd Da Hex Anuoc Max. ejector length: 90 mm Max. ejector on the punch side: 20 mm Motor: approx. 15 kW Max. output: 160 pieces/min, depending on the part to be produced Station 3: optional deburring or forming Press Biauli BF17B, year of manufacture 1998, 13 tons Oil pan: 424 kg Conveyor belt: 199 kg Control cabinet: 205 kg Platform: 186 kg Machine parts/accessories: 565 kg We sell the above items with the exclusion of any warranty for defects in materials and workmanship and without guaranteeing functionality or dimensional accuracy. We are not aware of any major defects, and the machine has functioned perfectly until recently.

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Knedpfx Anj Aa Inkouoc Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, ===== Technical Data + Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: HIDROBRASIL - Model: Single-Column Press - Machine Designation: Tablet Press - Design: C-Frame / Single-Column Press - Year of Construction: 2023 - Location: Gelsenkirchen, Germany - Pressing Force: max. 20 t - Machine Weight: approx. 2 t - Overall Height: approx. 2,400 mm ==== Working Area - Table Size: 500 × 400 mm - Plunger Size: 300 × 300 mm - Max. Opening Width: 500 mm - Stroke / min. Opening: 400 / 100 mm - Table Height above Ground: 800 mm ==== Speeds - Rapid Closing: 120 mm/s - Pressing Speed: 5–10 mm/s ==== Hydraulics & Drive - Operating Pressure: max. 250 bar - Pressure Accuracy: ±5 bar - Main Pump: Gear Pump, approx. 10 l/min - Oil Volume: approx. 150 l (HLP 46) - Main Motor: 22 kW - Total Connected Load: approx. 6 kW ==== Accuracy & Stability - Parallel Deviation: ±0.1 mm at 20 °C Knjdstv Ewdepfx Anusc - Deflection: max. 0.3 mm/m ==== Control & Safety - Control Voltage: 24 V DC - Light Curtains: SICK / PILZ / SCHMERSAL - Two-Hand Operation, optional Foot Operation - Safety design according to EU standards and UVV ==== Equipment - Tabletop as a tray with a 50 mm rim and drain - Position setting via sensors - Pressure setting: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Function - Multi-Tool: 8 pressing plungers - Output: approx. 8–12 parts per minute - Hydraulic unit can be completely disassembled for maintenance =====

Condition: excellent (used), mileage: 637,287 km, power: 309 kW (420.12 HP), first registration: 04/2000, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest Kjdpfx Ano Ab R Rdeuenc - Drum brakes - Front suspension: Leaf - Open roof - PTO - Rear suspension: Air - Sleeper cabin - Sper - Tipping hydraulics = More information = Year of construction: 2000 Tyre profile: 50% Brakes: drum brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: used, Opal Type: Opal 460 Opal 460 by ATM The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables smooth opening and closing of the embedding area. Manufacturer: ATM Q Ness GmbH Model: OPAL 460 Operating principle: The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. In hot embedding, the sample is embedded in an embedding press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding media (e.g., glass fiber reinforced) and the good gap-free embedding. Hot embedding media are available based on epoxy resin, acrylic resin, phenol resin, and graphite resin. Main application area: Embedding the samples for better sample preparation for further metallographic examinations. Technical data: Press mold diameter: Ø 30 mm, Ø 50 mm Temperature range: 20 ... 200 °C Max. pressure: 310 bar Kjdjzh D Avjpfx Anuenc Weight: ~ 40 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 Knsdpfxo Abbd Ie Anusc - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Knjdpfo Acm E Hox Anusc Model: TrumaBend V170 Year of manufacture: 2003 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat width (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil tank capacity: approx. 95 liters Hydraulic cylinder diameter: 190 mm Machine dimensions and weight: Total weight: approx. 18,000 kg External machine dimensions (W x D x H): approx. 5,000 x 2,210 x 3,100 mm. The machine is offered without tooling.

Condition: good (used), Year of construction: 2001, functionality: fully functional, operating hours: 7,300 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 175 t, stroke length: 400 mm, operating speed: 140 mm/s, reverse speed: 180 mm/s, distance table to ram: 720 mm, clearance between the columns: 3,550 mm, oil tank capacity: 350 l, total length: 6,350 mm, total width: 3,590 mm, total height: 3,220 mm, overall weight: 14,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, EHT VarioPress 175-40, Knsdpfxo Aa Nz Se Anuoc approx. 7300 operating hours, original EHT tooling, straight bending tool 420 mm x 4000 mm, split, forming pad 220 mm x 4000 mm, split, 2 sets of dies, split, pneumatic tool clamping system, top and bottom, automatic crowning, 2 x adjustable material support arms, table/punch distance, min.: 320 mm, table/punch distance, max.: 720 mm, 3 stop fingers, manually adjustable, 2 sets of upper tools, 1 x forming pad 220 mm, 1 x straight tool 420 mm, original operating manual and electrical diagrams available, annual maintenance and safety inspection carried out, last maintenance in 2025.

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SUPPLY • EBU H 12 FT eccentric press • Siegfried SPC control unit 2. DOCUMENTATION • Complete operating documentation available 3. TECHNICAL DATA Year of manufacture: 2013 Ksdsfrzlmspfx Anusnc Type: Eccentric press Rated force: 120 kN Max. tool installation height: 170 mm Max. weight of upper tool part: 25 kg Stroke adjustment range: 30 mm Ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Ksdezb Il Nepfx Anuenc Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: excellent (used), For sale: a professional German multi-spindle paper drilling machine, HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding facilities, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: motor with PRYM Getriebebau gearbox, 50/60 Hz Sturdy cast iron construction Adjustable worktable Knsdpfoz Sapaex Anuec Machine is complete and ready for operation Technical condition: very good. Used but well-maintained, without any play, with original nameplates and operating documentation.

Condition: excellent (used), For sale: a Lukas press in very good condition. Knsdpez Sb N Isfx Anuoc

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Knodpfx Ansz Saqqsujc

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type RP 3000 ----- Knjdpfxez Sd Dbs Anusc Working width: 3000 mm Working height: 2000 mm Item 1 S&S FRAME PRESS Type RP 3000 Item 2 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 Shut-off valve on the 1st vertical cylinder Item 4 Shut-off valve on the 3rd vertical cylinder Item 5 Shut-off valve on the upper horizontal cylinder Item 6 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression; lower abutment on two levels. Vertical press cylinders mounted on special pressure beams with one-handed quick-adjustment and weight compensation, height-adjustable in 50 mm hole spacing; long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via a ball-bearing-mounted carriage with central locking, fixed at 50 mm intervals. Upper horizontal press cylinder infinitely height-adjustable and fitted with weight compensation. Lower horizontal press cylinder with centring bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Pressure plate and support width 130 mm Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick-adjustment, 2 horizontal pressure cylinders d = 40 mm, stroke 80 mm double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 150 bar (corresponding to 400 to 3000 kg) vertical pressing force, with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working dimensions: 3000 mm x 2000 mm (length x height) ----- Price of the above machine on enquiry! ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Further options available on request. Please contact us for the full price list! ----- (Technical data as per the manufacturer, subject to change; the illustration may show optional equipment!) The images show a similar model. Original images are not yet available.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, overall weight: 410 kg, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Knodjur Racjpfx Anuoc Housing : gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set approx. 26 running meters of press brake tools fully assembled. Available in different sizes and with many accessories!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 97800 € 1848.42 € 160 to Kedpfxeynnbwj Anujnc 1100 mm 700 mm 210 mm 23 - 110 mm 60 1/min 630x400 mm 8 95 mm 65 mm 325 mm 480 mm 2400 mm 1430 mm 3200 mm 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH

Condition: excellent (used), A robust cutting press from the renowned Italian company ATOM. This machine is designed for cutting elements made of leather, rubber, felt, technical foams, cardboard, and other soft materials using steel dies. It is equipped with height and pressure adjustment using a handwheel. The heavy cast iron construction ensures stability and a long service life for the machine. Knsdpez Sm N Hjfx Anuoc Technical data: Manufacturer: ATOM Model: G777E Serial number: 6218 Motor power supply: 220 / 260 / 380 / 450 V Current connection: 220 V Adjustable working height Stable cast iron construction Made in Italy Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold in the exact condition as presented in the photographs.

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Kedpfx Anez Sncheuenc Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: used, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Year of manufacture: 1989 Empty weight: 4.000 kg - Year: 1989 - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Knodpfx Anox Dkfpeujc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), mileage: 563,316 km, power: 309 kW (420.12 HP), first registration: 10/2006, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, = Additional options and accessories = - PTO = Remarks = VF33DVC000105788 = More information = Year of construction: 2006 Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Number of cylinders: 6 Tipper: Back Technical condition: very good Visual appearance: very good Registration number: 82-CG-75 = Dealer information = Kodpfx Ansymqbkeuenc Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), functionality: fully functional, stroke length: 40 mm, table width: 180 mm, table length: 110 mm, distance table to ram: 195 mm, overall weight: 20 kg, Gechter 5 kN HKPV toggle press Condition: Good, fully functional Adjustment range: 180 mm Overhang: 90 mm Table: 180 x 110 mm Knodpfx Ae Aawaijnujc Mounting bore: Ø10 H7 Other models are also available. Shipping via DHL parcel, freight forwarder, or collection in 06112 Halle is possible. Sale to commercial businesses only, with exclusion of warranty.

Condition: good (used), Year of construction: 1980, power: 3 kW (4.08 HP), pressing force: 10 t, stroke length: 300 mm, total length: 1,400 mm, total width: 1,300 mm, total height: 3,300 mm, overall weight: 2,000 kg, Equipment: documentation/manual, safety light barrier, Year of manufacture: 1980 Knodpfx Aj Aaviionujc Equipment: – Filter cleaning, upper and lower stroke limit, – 2 operating modes – Venting system – Safety light curtain – Safety distance 110 mm (min.) – After-travel distance 12 mm (max.)

Condition: good (used), Year of construction: 1994, pressing force: 315 t, stroke length: 150 mm, Pressure: 315 t Stroke: 20-150 mm Adjustable ram stroke min./max.: 20 - 150 mm Knjdpfx Ae Aaxkienusc Table size: 1780 x 1250 mm Ram area: 1500 x 1000 mm Total power requirement: 75 kW Machine weight approx.: 46 t Additional information: - Installation height with max. stroke, adjustment at the bottom, installation at the top: 00 mm - Table opening: 1200 x 300 mm - Recess in the table: 1300 x 400 x 80 mm - Stroke rate continuously adjustable: 20-120 strokes/min.

Condition: excellent (used), mileage: 400,200 km, power: 250 kW (339.91 HP), first registration: 08/1998, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Open roof - Rear suspension: Leaf Kneds Aay I Ajpfx Anuec - Sper - Thick Axles = More information = General information Year of construction: 1998 Axle configuration Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Condition Technical condition: very good Visual appearance: very good

Condition: used, Raskin Mechanical Eccentric Press – Approx. 35 Tonnes Used Raskin mechanical eccentric press with a C-frame design, flywheel drive, and ribbed worktable. Suitable for metalworking workshops and small-scale production, including punching, stamping, forming, and other light press operations with appropriate tooling. Technical specifications: Manufacturer: Raskin Kedpfx As Aa Arwenuenc Type: Mechanical eccentric press Frame: C-frame Estimated pressing force: approx. 35 tonnes (unverified) Overall dimensions: approx. 1000 × 900 × 1900 mm Condition: Used Quantity: 1 unit Reference number: 46126-35825 Condition and additional information: The machine is offered in used condition, as shown in the photographs. The pressing force and dimensions are based on preliminary information and have not been independently verified. The mechanical system, electrical components, and safety equipment should be inspected before operation. Operating condition has not been verified. Tooling and other equipment visible nearby are not included in the sale. The press is available for inspection in Gātciems, Latvia, LV-2105. Please contact us for further information or to arrange an inspection.