Used Manual Press for sale (25,812)

Condition: used, Year of construction: 1988, pressure 400 t Kodpfjzrpt Uox Ahbedu distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Ksdpfsu Nfq Eex Ahbjdu Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Kjdpfx Ahezy U Uysbsdu The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m Kdodpfx Ahsyvgiasbou - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Kdodpfx Ahszxcldjbsu Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg Kedpfxeu N A Eao Ahbedu dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Flow table, system of claws holding the sheet. Electrically driven spreading roller. Kdjdpfxjz N Shhs Ahbsu

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Kdjdozb Aivspfx Ahbsu Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: new, functionality: fully functional, Year of construction: 2025, Manual swing bending machine Very robust design Maximum bending length: 1270 mm Maximum bending thickness: 2 mm Foot pedal operated Kedsyr If Rspfx Ahbsdu

Year of construction: 2006, condition: excellent (used), Punching capacity in sheet metal with a tensile strength of 37 kg up to: 2 and 3 mm Ksdod D Ryfopfx Ahbodu using various punching tools.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Kdedpfsz Rk N Hex Ahbju Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Kdedpjx Npiysfx Ahbou Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: Kjdpfxjvt Nvpe Ahbsdu -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: good (used), Bookbinding press with tapping block Ksdpoz Rk Rkefx Ahbodu The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure

Condition: reconditioned (used), Overhauled and newly painted. The images are example photos of similar machines and are intended to show the design and quality of the overhaul. All wear parts are replaced. Filter cloths are new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Volume: 312 liters Operating pressure: 12 / 15 bar Feed inlet: flange 2”, center Number of plates: 40 plates Plate material: polypropylene Cloth material: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip tray in plastic Motor hydraulics with single-acting cylinder. Optional: double-acting cylinder, which retracts the heavy pressure plates. Kdsdpfx Ahenh Nr Ijbou With the single-acting cylinder, the operator must push the pressure plates back manually. Optional: filling pump as a piston diaphragm pump or compressed air diaphragm pump. If the plate size, number of plates, or other features do not meet your requirements, we can offer corresponding modifications!

Condition: reconditioned (used), Overhauled and newly painted. The images are example photos of similar machines and are intended to show the design and quality of the overhaul. All wear parts are replaced. Filter cloths are new. 1-year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 liters Operating pressure: 12 / 15 bar Feed inlet: flange 2“, center Number of plates: 25 plates Plate material: polypropylene Cloth material: PP 5009 (white) Kdodji Igi Iepfx Ahbsu Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip tray in plastic. Motor hydraulics with single-acting cylinder. Optional: double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must manually push the pressure plates back. Optional: filling pump as a piston diaphragm pump or compressed air diaphragm pump. If the plate size, number of plates, or other features do not meet your requirements, we can offer corresponding modifications!

Condition: used, Year of construction: 2015, For sale: professional hydraulic CNC bending press AMADA HFE M2 170-3. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 170-3 Date of manufacture: 2015.06 Kjdpezrw Akefx Ahbjdu Bending force: 170 T (1700 kN) Working length: 3000 mm Maximum bending length: 3340 mm Motor hours: 16,615.07 Technical parameters: Distance between columns: 2700 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 18 kW Machine dimensions: Length: 4470 mm Width: 2625 mm Height: 3140 mm Weight: 12400 kg Equipment and features: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2015, functionality: fully functional, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser Kdodpfezrwc Dex Ahbeu If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. Kdsdpewyc H Tefx Ahbju - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Kdjdpfstndu Ujx Ahbsu CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Specification 360/N Type Manual Laminator 360/N Application Laminating dry-film photoresist onto PCBs Max. panel width 635 mm Material thickness approx. 0.05 – 12.7 mm Laminating rollers 2, both driven Temperature control Thermoregulators for the laminating rollers Drive Adjustable transport speed Kjdozum Afopfx Ahbjdu Control PLC Compressed air Required for pneumatic functions Film Dry-film photoresist Design Manual laminator Manufacturer/documentation Duesse / Shipley, Rohm & Haas

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 450 kg Price: On request Ksdoztxn Ropfx Ahbsdu - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) Kedpfx Aheztxnqsbedu - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Maximum working area: 883 mm Kdsdpfx Aoz Izcwjhbeu MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic unit Control panel

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V Ksdpfeyzzh Eex Ahbsdu electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *