Used Lockforming Machine for sale (64,859)

Condition: used, Year of construction: 1995, Technical details: Table dimensions: 920 x 620 mm voltage: 220 / 50 V / Hz Kodpfx Ajvc Axcjhbedu total power requirement: 0,77 kW weight of the machine ca.: 0,11 t dimensions L x W x H: ca.0,92 x 0,62 x 0,80 m Strapping Machine Semi-automatic machine for plastic strapping (approx. Ø 500 x 17mm) Strap holder located in the base cabinet table surface folded with 1,5mm chrome plate with stop LxWxH 345 x 80 x 20mm, adjustment approx. 32mm The adjustment of the tightening is done by display on linear scale. The packaging machine is mobile and easy to move = 4 castors, swiveling and 2 castors are braked. *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Ksdeu T Navspfx Ahbedu Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min Kdedpfou Utwbjx Ahbsu revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm Kodpou U E T Ijfx Ahbsdu total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN Kdodpfsvad Hpox Ahbeu spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine approx.LxWxH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Machining area can be partitioned, partition wall available *

Condition: used, Year of construction: 1998, Technical details: x-travel: 820 mm y-travel: 280 mm z-travel: 410 mm spindle taper ISO: SK 40 distance table/horizontal spindle: min. 30 / max. 440 mm cross rail adjustment - horizontal: 650 mm range of revolution per miute: 40...2000 / 18step U/min swival range +/-: bei 90°: 360° und bei 45°: 360° Grad clamping surface area: 1120 x 250 mm table swivable approx.: 45° rechts / links feed:: X/Y: 12,5 - 830 + Z: 5,2 - 260 mm/min Ksdpjva Ei Ssfx Ahbodu rapid traverse: X/Y: 2500 und Z: 1040 mm/min. total power requirement: 10 kW machine weight approx.: 2000 kg dimension machine xH: 2,2 x 1,8 x 1,7 m Ausstattung: 2x Gegenlager Ø 55mm Kühleinrichtung: Pumpe und Zuführung Bedienung über 3-Wege Messsystem ACU-Ride und Bedientafel Maschinenfüße *

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. Kodpfeu Ibyyox Ahbsdu The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Kdjdpeu Ibzkofx Ahbeu Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) Kodpsu Ibzwsfx Ahbedu accessories: - 1 set tools *

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel Kjdpsu Icdyofx Ahbsdu 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm Kjdpfsu Id H Ajx Ahbjdu *

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min Kjdpfx Ahou Idgcsbodu tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm Kdedpju Idmvsfx Ahbeu y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: used, Technical details: Kdsdpfx Ahou Idu Hebou bore capacity in steel (diameter): 30 mm bore stroke: 180 mm drill spindle - Morse Taper: 4 x MK 3 spindle throat: 310 mm spindle distance: 490 mm number of drilling stations: 4 headstock adjustment: 300 (manuell) mm feed:: 0,08 - 0,64 / 6 step mm/U spindle speed:: 50 - 1.215 / 19 step U/min distance between table/spindle: max./min.: 500 / 200 mm table surface area: 1820 x 395 mm table adjustment: Höhe: 300 (manuell) mm total power requirement: 4x 1,5 (6,0 kW) kW weight of the machine ca.: 2,8 t dimension machine xH: 2,1 x 1,1 x 2,75 m Further technical data: -Center distance of the drilling spindle 490mm -thread cutting on drilling columns 3 and 4 with automatic switchover -All drilling spindles run with clockwise and counter-clockwise rotation -spindle countershaft and variator -with coolant system *

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: Kjdju Id Awspfx Ahbsdu - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min Kodpfx Aju Nc Hkshbjdu quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Condition: used, Year of construction: 1978, Technical details: x-travel: 1200 mm y-travel: 500 mm z-travel: 650 mm w-axis: 90° rechts/links table-size: 1600x500 mm revolution per minute: 24 - 1600 / 12 step U/min tool taper: SK 50 distance spindle nose and table: min/max: 150/800 mm distance spindle center to column: min/max: 200/800 mm table surface area: 1200 x 520 mm total power requirement: ca. 25 kW weight of the machine ca.: 5600 kg dimension machine xH: 2,4 x 3,0 x 2,4 m dimensions electric cabinet LxWxH: 1,1 x 0,5 x 1,8 m Further technical specifications: - horizontal spindle: rpm 25 - 1200 with 12 level, taper SK50 - controlled via control panel - incl. coolant device - equipped with measuring system manufacturer Millvision Kdjdpfx Ahou Nc Rvsbou *

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm Kdodpfxju Nc Tws Ahbou clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: IBAG SKI 25 control: Heidenhain TNC 425 quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg tool holder / places: 32 places für IBAC SKI 25 Kdsdju Nc Uhspfx Ahbsu weight approx.: 3600 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre capacity Accessories: - 3-D push-button Heimer - Vertical head Hermle - Tool holders according to availability i.D. *

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. Kdedpfxou Ndb Ae Ahbou The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: used, Year of construction: 1984, Technical details: x-travel: 950 mm y-travel: 255 mm z-travel: 250 mm spindle taper ISO: 40 / MK 4 range of revolution per miute: 45 - 2000 / 12 step U/min headstock swivable +/-: 90° vertikal = 90° rechts/links ° headstock swivable +/-: 45° vertical = 90° rechts/links ° feed:: (table) Tischvorschub: X/Y: 16 - 132 mm/min feed:: (table) Tischvorschub: Z: 8 - 66 mm/min clamping table: 1200 x 300 mm total power requirement: 5,4 kW kW machine weight approx.: 1,7 kg dimension machine xH: 1,6 x 2,0 x 2,0 m Kdsdpsu Ndcyofx Ahbsu The spindle head can be swung out. Equipment: with coolant system with cooling water collecting tray Accessories div. milling cutters and milling shafts (comparable in the photo) *

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm Ksdpfx Aeu Ndd Rehbjdu range of revolution per miute: 36 - / 18 step U/min feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm Ksdou Ndf Iepfx Ahbjdu *

Condition: used, Technical details: balancing body max.: 7000 kg balancing body diameter w/o machining unit: 1870 mm balancing body diameter with machining unit: 1870 mnm distance between bearing centers: min. 200 mm Kdsdpfxozuyd Ne Ahbsu rotation weight: 7000 kg Rotor-Ø: 1870 mm Bearing journal Ø: 40 - 180mm mm control: CAB 690 voltage: 380 V /50Hz V/Hz Rotor weight: 40–7,000 kg Machine overload capacity with symmetrical loading: up to 9,000 kg, i.e. max. 4,500 kg per bearing pedestal 1 × machine bed, divisible: 3.85 m + 2.0 m *

Condition: used, Technical details: number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm Kjdow Th Nlspfx Ahbodu drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm total power requirement: 12,4 kW weight of the machine ca.: 3,1 t dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! *