Used Minarctig Evo for sale (627)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Heidenhain, controller model: TNC 7, workpiece weight (max.): 300 kg, rotational speed (max.): 100 rpm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 60, mount diameter: 80 mm, tool length: 300 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Top 5-axis machine with torque drives in B and C axes, optionally with BLUM laser, tool measurement, internal coolant up to 60 bar, belt filter, further options on request, automation is also possible. Gtodpfsyucq Hox Ahvow

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table load: 1,500 kg, rotary table diameter: 700 mm, rotational speed (max.): 800 rpm, overall weight: 12,000 kg, spindle speed (max.): 17,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MILLING/TURNING CENTER, HSK 63T, Heidenhain, 90 tools Swivel Milling Head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 17,000 rpm Gjdpsylnq Tsfx Ahvetw - 154 Nm torque - Drive power 29 kW - Separate spindle cooling for consistent temperature - Tool holder HSK-T63 with air blast function Integrated Rotary Table: - With torque motor and hydraulic clamping - Speed 800 rpm - Diameter 700 mm - Extended clamping surface 1,600 x 700 mm General Features: - Heidenhain glass scales on all 5 axes - 90-position tool changer with double-arm gripper - Coolant and compressed air pistol - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting - Ergonomic control console

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 548 mm, turning diameter: 460 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 620 mm, spindle motor power: 24 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 4,500 rpm, overall weight: 7,600 kg, swing diameter over bed slide: 600 mm, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, Top new machine, "THE TANK" with Siemens 828 Shopturn, BMT65 (MORI), Renishaw probe arm, and sub spindle. Available with automation at extra cost (see pictures). - Siemens 15.6'' touch display - Main spindle 3,500 rpm - Siemens motor - Box guideways with Turcite coating - 12-station BMT turret for 12 driven tools - 3-jaw chuck Ø 250 mm on main spindle - 3-jaw chuck Ø 150 mm on sub spindle - C-axis - Y-axis - Sub spindle - Chip conveyor - Coolant system and high-pressure (IKZ), 20 bar Gjdpfxjylnb Sj Ahvstw - Work area lighting - Foot pedal for chuck - Multi-colour machine status indicator Pictured AGWs are not included in the offer.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 770 mm, turning length: 740 mm, turning diameter: 570 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 820 mm, spindle motor power: 36,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, overall weight: 8,800 kg, swing diameter over bed slide: 770 mm, bar passage: 91 mm, chuck outer diameter: 305 mm, Equipment: rotational speed infinitely variable, Top new machine, "DER PANZER" with Siemens 828 Shopturn, Renishaw measuring arm, tailstock Gtedpfeylm Rrox Ahvsw

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Gjdpfxeylirls Ahvetw

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Gedpfx Ahsxu I R Dsvjtw Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Condition: good (used), Year of construction: 2016, Vertical Machining Center Machine type: MTCut MVY150H Control: Heidenhain iTNC 530 SmarT.NC Year of manufacture: 2016 Spindle operating hours: 7,140 h Power-on hours: 21,774 h New spindle TECHNICAL DATA: Travel distances: X-axis: 1,500 mm Y-axis: 700 mm Z-axis: 810 mm Rapid traverse (X/Y/Z): 68 m/min. Max. spindle speed: 18,000 rpm Torque: 162 Nm Drive power: 34 kW Tool holder: HSK 63 Tool stations: 40 Gedpfx Ahex Uqrgjvstw Table size: 1,500 x 800 mm Features: Chip conveyor Through-spindle air Electronic handwheel Chip flushing gun Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe: TS460

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn - 12,000 rpm Gtedpfx Ahjxwufasvsw - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck - Roller guides - Coolant and compressed air gun - Screw chip conveyor - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 18,600 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 34,000 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new demonstration machine, laser, probe, configurable through coolant (IKZ) Gedpfxexbzyro Ahvstw

Condition: used, Year of construction: 2013, operating hours: 15,000 h, functionality: fully functional, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 88 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 24,000 W, overall weight: 5,800 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Tool holder VDI40, machine is used, geometry and accuracy checked by MT EVO Godpfx Ahoxdbvxjvstw

Year of construction: 2021, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 210000002, Industrial vacuum cleaner with integrated liquid bath separator Dust class H/Type 22 400 volts, 2,200 watts 60 l dirt container Air volume max: 330 m³/h Vacuum pressure max: 240/300 mbar Filter levels: 1st filter level: liquid bath separator 2nd filter level: demister 3rd filter level: VA filter 1m² 4th filter level: H14 filter cartridge 2mEX-protected for use in zone 22 according to Gsdpfevt Aghsx Ahvstw EN 60335-2-69 including appendix AA and EN 62487 as well as ATEX 2014/34/EU incl. 3.5 m ESD-PUR suction hose Ø40mm electr. conductive with VA-Kamlock coupling, crack nozzle Serial number 21000002 LxWxH: 83X68X165cm 1.00 piece 072-0401-ESD ESD extraction arm Ø50mm x length 1,500mm, table mounting 030902 certified according to IEC 61340-5-1, 3 joints 1.00 piece ESD flat hood Ø50mm, 300x200mm including hood pipe connector, certified according to IEC 61340-5-1 SET: console for extraction arm Ø50mm Material: ST/K

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V11914, Year of construction: 2019, operating hours: 5,993 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,625 mm Overall height: 2,121 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Version: 3-wheel electric Battery: 48 V, 625 Ah, tested very good performance at 50.1 V Operating hours: 5,993 h EQUIPMENT Former Linde full-service unit Gtsdpfjytn T Rsx Ahvsw UVV inspection valid until 02/2027 Next service due 02/2027 or in 1,000 operating hours All dimensions are rounded figures. No liability for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email proof of payment! Collection WITHOUT further registration possible Monday to Friday 7:00 am to 4:30 pm. A mast that is too high can be dismantled for transport upon request. In case of delayed collection, a storage fee of €20 per machine per day will be charged (payment must be settled prior to pickup).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2Y394L01382, Year of construction: 2022, operating hours: 4,782 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,900 mm Free lift: 150 mm MACHINE DETAILS Mast type: Standard Drive type: LPG Godpfx Asytn I Ishvstw Battery: 12 V starter battery Operating hours: 4,782 h EQUIPMENT Former Linde full-service unit Safety inspection (UVV) until 02/2027 Next service due in 518 operating hours Note: Mast removal costs €750 net. All dimensions are approximate. No liability is assumed for any writing or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior appointment from Monday to Friday, 7:00 am to 4:30 pm. If the mast is too high for transport, it can be dismantled on request. If the machine is not collected within the agreed deadline, a storage fee of €20 per machine per day applies (additional charges must be paid before collection).

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,090 h, load capacity: 3,500 kg, lifting height: 4,655 mm, free lift: 1,424 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, power: 44 kW (59.82 HP), fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load centre: 600 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Technical condition: very good Front tyre condition: 60 - 80% Rear tyre condition: 60 - 80% Sideshift, fork positioner, Gtodpfx Aeyq T Eaehvow Cascade Rotating Fork Clamp 52G-TMS-B513L RO 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, CE certificate, LED, The forklift is container-capable!

Condition: used, Year of construction: 2014, x-travel 600 mm Gtodoycxinspfx Ahvjw y-travel 500 mm z-travel 500 mm total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Gtjdpjyudidsfx Ahvsw Location: Nattheim

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Gtjdpfxeyubz Do Ahvow Measuring probe TS649 Documentation

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Godoul Svlopfx Ahvjtw Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm Gtjdpfx Aeytha Djhvew max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg dimensions of the machine ca. 6,6 x 5,4 x 3 m total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Godpfxjyui Eke Ahvetw Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,265 h, load capacity: 1,600 kg, lifting height: 4,100 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,100 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,600 kg Triplex 410 cm 3rd + 4th Valve Electric Forklift 3,265 Operating Hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Free lift: 1,500 mm Lift height: 4,100 mm Mast type: Triplex Design: Counterbalance forklift MACHINE DETAILS Gtjdpfoyufrmox Ahvjw Operating hours: 3,265 h Mast type: Triplex Drive type: Electric Battery: 48 V, 625 Ah Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,100 mm Weight: 3,400 kg FEATURES Former Linde full-service machine Facelift model with tilt angle display Triplex mast with full free lift 3rd valve for side shifter 4th auxiliary valve open for fork positioner White non-marking tires Front LED work lights Rear safety light Comfort seat All dimensions are rounded values. No liability accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Pickup ONLY with email confirmation of payment! Pickup WITHOUT prior notice: Monday to Friday 7:00 am – 4:30 pm. If the mast is too high, it can be disassembled for transport upon request. If pickup is not made within the agreed timeframe, a storage fee of €20 per machine per day will be charged (the outstanding amount must be paid before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,213 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,400kg Duplex Free Lift Electric Forklift No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 3,145 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 13,213 h Mast type: Duplex Drive type: Electric Battery: 48 V 500 Ah, measured at 49.5V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,100 x 2,121 mm Weight: 3,100 kg EQUIPMENT Former Linde full-service unit Duplex mast with full free lift 3rd valve with sideshift Load guard (can be easily removed) Gtedpfjyufbhjx Ahvew All dimensions are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site, at buyer’s own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment Monday to Friday 7:00 am–4:30 pm. High masts can be dismantled for transport on request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day applies (payment due before collection).

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Gtsdpfx Ajx D Hpwshvew Application Types Milling

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,446 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027, Battery 19/2022 No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gtedpfx Ahsyud Sljvsw Load capacity: 2,000 kg Lift height: 3,140 mm Fork length: 1,800 mm Free lift: 1,519 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,446 h Drive type: Electric Battery: 19/2022 48V 750A, 49.6V (very good performance!) Mast type: Duplex Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,121 mm Weight: 3,500 kg EQUIPMENT Former Linde full-service unit Valve side shifter Duplex mast with full free lift All measurements are approximate. No liability for typing or measurement errors. COLLECTION TERMS Side loading up to 5 t possible onsite with a large forklift at buyer's own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment, Monday to Friday 7:00–16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (outstanding payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 16,254 h, load capacity: 5,000 kg, lifting height: 5,400 mm, free lift: 150 mm, construction height: 3,720 mm, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, 5,000 kg Service + UVV 02/2027 3rd & 4th Valve, Fork Positioner, AC, Air Conditioning, Diesel Forklift Truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,400 mm Fork length: 2,400 mm Free lift: 150 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 16,245 h Mast type: clear-view mast Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,800 x 1,450 x 3,720 mm Weight: 7,700 kg EQUIPMENT Former Linde service unit Current service completed, next service due in 755 hours Full cab with air conditioning, heating, and windscreen wiper Clear-view mast without central hydraulic cylinder 3rd and 4th valve for fork positioner with side shifter All measurements are approximate. No liability is assumed for typographical or measurement errors. Gedpfx Aeyudkbehvjtw COLLECTION CONDITIONS Loading from the side up to 5 t possible with large forklift truck on site at your own risk. Collection ONLY with payment confirmation received via email! Collection WITHOUT appointment Monday to Friday 7:00 a.m. - 4:30 p.m. If the mast is too tall, it can be dismantled for transport upon request. If collection is not punctual, a storage fee of €20 per machine per day will apply (additional payment must be made before collection).