Used Mortise Machine for sale (63,958)

Condition: used, Year of construction: 1973, Storage location: Nattheim Bdedpsvvkt Usfx Aizoc

Condition: used, Slot mortising machine SAMCO AS 16 - used - Movable motor, Dowel drilling device ----- Technical data ----- Bsdpfow Nv Nxjx Aizedc Worktable dimensions: 550 x 285 mm, Drilling width: 190 mm, Drilling depth: 120 mm, Speed: 2,840 rpm, Motor: 1.5 kW, Weight: 220 kg

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products Bodpfx Aioytr Edjzjdc no. 4 independent lower groups, tiltable No. 2 upper vertical oscillating groups

Condition: used, Blade 150 mm Chain width 7-8 mm engine 1,6 kW Festo type PP chain mortiser or chain cutter with pneumatic feed for milling out lock cases or other fittings. Bsdey Slh Dspfx Aizodc

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Bedjv Hm Nmjpfx Aizjdc Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Bdodpoytx T Isfx Aizoc Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Maximum milling height: 120 mm Bedpfoy Sg Ufex Aizodc Maximum milling depth: 50 mm Maximum milling width: 260 mm Spindle diameter: 40 mm Motor power: 11 kW Spindle speed: 5,400 rpm Feed rate: 0–3.5 m/min Weight: approx. 400 kg

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Bodpfsyuty Sex Aizjdc Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Bdsdeulfuzopfx Aizsc Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: used, Year of construction: 1938, Machine cleaned, function tested, trial run incl. various chain sets Used, good condition, low hours Manufacturer: Haffner Type: KF20 Year of manufacture: 1978 Machine no.: 20378 Column-type machine + undercarriage Chain set 12-17 / 50 x 175 J3 Door support Space requirement approx. 750 x 800 x 2000 mm Weight approx. 200 kg Bdedpfx Aioythcfjzoc Location: 97447 Gerolzhofen, free on truck, unpacked Delivery as seen, without any warranty or guarantee

Condition: good (used), Motor power: 2,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Bdjdpfxsdrq Sao Aizec Chain width: 20 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Condition: new, Year of construction: 2026, CORMAK PLBM290 horizontal drilling machine is a professional solution for efficient wood machining. Equipped with advanced features ensuring proper machining quality. Machine features accurate drilling achieved by a bilaterally tilted drilling unit four-level head (16-20-22-25 mm) 2 limiting switches left/right spindle rotation simple, one-handed handling 100 mm diameter extracting connector Bdjdpfx Aievuq Hlezec Technical data Table dimensions 570x300 mm Table extension 600x300 mm Drilling table height 810 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm S1 continuous work motor power 3.8 kW Power supply 400V Extracting connector diameter 100 mm Two-jaw chuck 0-20 mm Dimensions 570x850x1340 mm Weight 140 kg

Condition: new, Year of construction: 2026, CORMAK PBM290 horizontal drilling machine is a professional device created for efficient wood machining. It is equipped with advanced solutions ensuring perfect quality of finished products. Machine features high-quality guides, providing easy table height adjustment easy one-handed usage due to a well-placed handle simple and smooth table movement Bedpfx Aievuq Dkozodc left/right spindle rotation 100 mm diameter extracting connector Table dimensions 500 x 200 mm Drilling table height 760–900 mm Maximum drilling width 300 mm Maximum drilling depth 140 mm Spindle speed 2850 rpm Drilling chuck 0–16 mm S1 continuous work motor power 2.2 kW Power supply 400V Dimensions 770 x 920 x 1245 mm Weight 102 kg

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Bodpfsyxx A Isx Aizjdc Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1984, used, in good condition Cleaned Function-tested Test run Manufacturer: Kölle Model: L2 Year of manufacture: 1984 Machine no.: 1788 Motor: 1.5 kW 2-lever operation Chuck runout max. 8/100 mm Table size: 520 x 290 mm Drill chuck: 20 mm Dowel drilling unit with 4 stops: 16, 22, 25, 32 mm Workpiece stop Digital height adjustment display Required space approx. 1000 x 1200 x 1300 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Bedpfx Aijy Apfnezodc Delivery in as-is condition as inspected, function-tested without refurbishment, without warranty or guarantee

Condition: used, functionality: fully functional, input voltage: 400 V, BÄUERLE horizontal boring machine, very solid construction, 3D table, on chassis, drill bit set included, 400V 16A connection with fuse. Bdedpfsyz U R Tjx Aizec

Condition: excellent (used), Bargain from liquidation: Krüsi ZA 66, swivelling and mobile Bedpfxjylpv Do Aizodc

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Bsdpfxsythcro Aizodc Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: good (used), Code: 0286 Brand: BFM Model: CU 80 - CE Standard Bit mortising machine for drilling holes and grooves in wood, joinery, furniture, doors, shelves, panels and various - CE Standard Technical data: Worktable dimensions mm 580 x 300 Wescott spindle connection 16 mm Motor Hp 3 - rpm 2800 Reverse rotation Bodpeyfhtbsfx Aizjdc Vertical adjustment of unit mm 200 Workpiece clamping presser Overall dimensions mm 650 x 900 x 1300 h Weight kg 280

Condition: reconditioned (used), Year of construction: 1960, functionality: fully functional, workpiece weight (max.): 1,800 kg, type of input current: three-phase, total width: 2,000 mm, table width: 700 mm, space requirement length: 2,000 mm, space requirement height: 2,300 mm, GSP slotting machine for straight and tapered keyways. 320 mm stroke. Centralized lubrication. Lighting. Circular table. Bjdpsyl Rprefx Aizedc

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Bsdjxdttpspfx Aizedc Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: used, Door lock milling machineused, good conditionmake Haffnertype SL 100machineNo. 2269upright machinechain setdoor supportworkpiece supportpusher hole motorforend motorlubricatorsuction connection D 80/100 mmspace requirement approx. 1200 mm x 700 mm x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Bodpfevwfmfex Aizjdc

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Bdodpfx Aovwfr Ioizec

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Bdsdpfx Asvwf H Esizoc

Condition: used, with rotatable mortizing unit /- 90 ° and inclinable supportincl. many chain setsused, top conditionmake Bäuerlewall machinechain set 12-17 50 x 175milling unit rotatable 90° / -90°space requirement approx. 800 mm x 1000 mm x 1300 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Bdodsvwfhvspfx Aizec