Used Lead Screw for sale (6,396)

Condition: excellent (used), Year of construction: 2010, S016246 S/N CAI406542 YEAR 2010 POWER (kW) 11 CAPACITY (m3/min) 1.25 PRESSURE (bar) 12.75 HOURS (RUNNING/TOTAL) 18576 FREQUENCY CONVERTER no BUILT-IN DRYER yes, R134a 0.48kg EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no Kjdjz Dgcujpfx Ah Esdt DOCUMENTS no NEW/USED USED

Condition: used, Year of construction: 2022, operating hours: 15,000 h, functionality: fully functional, overall weight: 2,020 kg, power: 90 kW (122.37 HP), volume flow: 960 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, Equipment: documentation/manual, type plate available, We offer this used Hertz FRECON 90 P screw compressor, manufactured in 2022. Pressure: 8 bar Capacity: 16 m³/min Rated power: 90 kW Weight: 2020 kg Voltage: 400 V Frequency: 50 Hz Maximum shaft speed: 2340 min⁻¹ Date of manufacture: 04/2022 Ksdpfx Ajz Abb Esh Ejdt If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: refurbished (used), PRICE ON REQUEST! Price on request: The price for the products offered is not stated directly, but must be requested. Condition of the products: The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.02). Delivery and packaging: The products are delivered in a special box and the shipment is insured. Central hand exchange: It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without exchange on request. Warranty: A warranty of 12 months is offered, and there is an option to extend this to 18 months, but at an additional cost. Stock: The supplier has more than 100 central hands in stock, various models are available. Express overhaul: A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours after delivery. Repair service: In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear and tear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Fixing oil leaks: We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: All worn components are carefully replaced to extend the service life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: Experienced team of robotics experts Fast diagnosis and repair Use of high-quality spare parts Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de". Ksderal R Tepfx Ah Eodt

Condition: excellent (used), Year of construction: 1999, PROD. GRASSAIR TYPE S88.07 Kdjdpfx Aoz Dh Uxoh Eet S/N 88070799n416 YEAR 1999 POWER (kW) 30 CAPACITY (m3/min) 4.50 PRESSURE (bar) N/A HOURS (RUNNING/TOTAL) 6437/10922 INVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2015, PROD. ALUP TYPE ALLEGRO 55 S/N API172927 YEAR 2015 POWER (kW) 55 CAPACITY (m3/min) 10.1 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 72964 FREQUENCY CONVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Kdjdpfxoz A Tqvj Ah Eet CONNECTION 1 NEW/USED USED

Condition: good (used), Year of construction: 2008, operating hours: 1,408 h, machine/vehicle number: 89-4010241, USED AIRMAN 830CFM,150PSI AIR COMPRESSOR MODEL : PDSF830S Kdedpfx Aeyrb Hnjh Est SERIAL :89-4010241 YEAR : 2008 HOUR : 1408 AS SHOWN

Condition: new, Precision lead screw and feed screw lathe Manufacturer: GDW Model: LZ 400 V economyline Condition: New machine with stepless speed control to the highest safety standard Centre height: 200 mm Centre distance: 1,000 mm Spindle bore: 62 mm Standard configuration includes: Kjdpexg Emyjfx Ah Eodt -- 3-axis digital readout, 7" colour display with constant V feature - LED machine light, integrated into machine enclosure - Electromechanical limit switch system for threading and feed operations - Quick-change toolpost size B with turning tool holder - Main drive brake system (spindle brake) - Sliding chuck guard with interlock monitoring - Removable chip guard rear panel - Sliding splash guard - Extendable chip tray - Simple bed stop - Central lubrication system - Set of change gears (number of teeth: 21-33-84-120) - Reducing sleeve for main spindle inner taper ME 70/MK 4 - Protective flange for spindle nose DIN 55027-6 - Additional service socket - 2 fixed centres DIN 806-MK 3 - Set of operating tools, keys and oil gun - Spare shear pins - Operating manual with spare parts list and electrical documentation

Condition: new, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 330 V economyline Condition: New machine with stepless speed control according to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: - 3-axis digital readout, 6" colour display - LED machine light, integrated into machine enclosure - Electromechanical limit switch device for threading and feed operation - Quick-change toolpost, size A, with turning toolholder - Main drive brake system (spindle brake) - Sliding chuck guard with limit switch monitoring - Removable rear chip guard - Sliding splash guard - Pull-out chip tray Kdedpfxsw S E Ddo Ah Eot - Simple bed stop (longitudinal fixed stop) - Central lubrication - Set of change gears (tooth counts: 21-27-28-33-42-120) - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 - Additional service socket - 2 fixed centre points DIN 806-MK 3 - Set of operating tools, keys, and oil gun - Replacement shear pins - Operating manual with spare parts list and electrical documentation

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Kdjdpszzpttofx Ah Eot The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.

Condition: ready for operation (used), Macmon M100 Universal Milling Machine - Milling spindle - Number of spindle speeds: 16 - Spindle speeds: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 rpm - Spindle internal taper: ISO 40 - Collet bore up to: 25 mm Ø - Spindle block travel (manual): 170 mm - Angular milling table - Size of clamping surface: 640 × 195 mm - 2 T-slots, width/spacing: 12 / 90 mm - Longitudinal travel, automatic/manual: 290 / 310 mm - Vertical travel, automatic/manual: 310 / 340 mm - Feed gear - Number of feeds: 16 - Feed rates (mm/min): 9, 14, 18, 22.4, 28, 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450 - Motion lead screws - Longitudinal travel of the table (1 revolution): 5 mm - Vertical travel of the table (1 revolution): 2.5 mm - Drive motor - Power: 1.3 / 1.8 kW - Speed: 700 / 1400 rpm - Documentation Dimensions: L x W x H 1.0 x 1.0 x 1.3 meters / Weight 700 kg Kdodpfoztfmyjx Ah Eot Errors and omissions excepted.

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Ksdpfjzww H Tex Ah Esdt

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Kdedozp Ilqopfx Ah Ejt Weight: 1800 kg Engine power: 11 kW

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Kdjdpszi A Iyjfx Ah Est

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Kedpfx Ahjzy Spze Ejdt

Condition: excellent (used), Year of construction: 2016, S016277 PROD. ALUP TYPE ALLEGRO26 CE S/N CAI907698 YEAR 2016 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) INVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air Kdsdpfjz A Tk Aex Ah Eet CONNECTION 1" NEW/USED used DOCUMENTATION no

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm Ksdjh Uuzyspfx Ah Esdt -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: used, Year of construction: 2022, functionality: fully functional, BASIC TECHNICAL SPECIFICATIONS: Working dimensions: - X-axis: 3000mm (practical maximum length is unlimited), - Y-axis: 950mm, - Z-axis: 80mm (maximum workpiece thickness), 250mm from the console. Travel of working axes: - X-axis: 1475mm (1200mm without workpiece handover), - Y-axis: 1550mm, - Z-axis: 225mm; Axis drive system: X-axis: gripper movement via toothed rack, Y-axis: via toothed rack, Z-axis: lead screw Travel speeds: - X axis: 90m/min (with open grippers) / 25m/min (with closed grippers) - Y axis: 90m/min - Z axis: 18m/min. - Required compressed air pressure: 8 bar (at the inlet), 6 bar (min. operating) External dimensions: - Length 2075mm (one module) x Width 2400mm x Height 2274mm Construction: Monolithic steel frame. Machine weight: 1950 kg. MILLING UNIT: - Motor power 12kW (S6 class, max. power at 12,000 rpm) - Spindle speed 1,000-24,000 rpm (controlled via a frequency converter), - Motor cooling is air-cooled. Bearings are ceramic. - Pneumatic tool clamping, HSK-F63 type, via a tool magazine (collets with a diameter of 0-20mm, ERG-32 type). - Pneumatically controlled extraction hood in 2 positions - Maximum tool weight is 7.5kg (depending on the spindle speed). Drilling unit with built-in saw in the X-axis, model DH-17 6H 1S. - UPS system for uninterruptible power supply Kjdpozp Nzgofx Ah Eodt - Barcode reader - wireless - Device for automatic tool length measurement - Optical display of machine status on the console - Additional sealing on all guides - Air cushion on the inlet and outlet table - Workpiece placement at the rear of the machine - Larger drilling unit DH25 8H 1S (25 drills) - Additional pneumatic front support for longer workpieces

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, power: 400 kW (543.85 HP), volume flow: 3,996 m³/h, pressure (max.): 8.5 bar, type of cooling: water, Equipment: type plate available, Second-hand Atlas Copco GA400W 400 kW, 8.5 bar with 66.60 m³/min Water-cooled. Year of manufacture: 2009. Kedpfx Aow A N Dwsh Esdt

Year of construction: 2015, condition: good (used), We are selling 3 used paper pulp thermoforming machines in good condition and additional equipment. Model TPM-1500, manufactured by "Taiwan Pulp Molding" - one of the world's leading companies in this area. Thermoforming Line Description: 3 stage production (forming + drying 30t + hot pressing 50t). 480 v, 60 Hz; Manufacture date - Oct. 2015. Effective Molding Area, mm - 1500 x 900 x 120; Overall dimensions, mm - 7600 x 2250 x 3700; Weight - 16 tonnes; Production speed - up to 80 kg/h; The necessary quantity of operators - 1; Press pressure (critical for quality and performance) - 40t (1st) / 50t (2nd); Movement mechanism - Servo drive + ball screw, encoder positioning, accuracy +/- 0.01 mm for the drive, 0.05 mm for the mechanics; Automated sprinkles for quality improvement - For molds: adjustable time interval (15-20 bar). For products: automatic (2-3 bar); Safety - emergency stop button, optical sensors, zone security fences. Installed power - Up to 400 kW, depending on the type of product and quantity of heating elements. Features: 1. Completely dry-in-the-mold pulp product. 2. No distortion or variation in shape & size. 3. Smooth surface, highest quality finish in the industry. 4. Maximum mold utilization. 5. Suitable for various product's wall thicknesses. Suitable for the production of the following products: High-finish molded paper packaging; Single-use paper dishware; Single-use paper Cup lids; Paper Cup holders; Paper egg cartons; etc. Each Thermoformer set includes: Taiwan Pulp Molding Auto Stacker - TPM-AS-1500 0.5 HP, Two-Stage Auto Stacker 480 v, 60 Hz, Belt Width: 1500 mm; Cutes Water-ring Vacuum Pump (2017) - Cutes NN-1001FCD vacuum pump, 75 HP, 880 RPM, 1,000 CFM. Price per 1 Set: Thermoforming machine 300 000 euro + Autostacker 20 000 euro + Cutes water-ring vacuum pump 5 000 euros = 325 000 euros per set. If purchase few sets discount can be discussed. The last set includes a pulp preparation system and costs + 50 000 euros: 1. Taiwan Pulp Molding Co. Hydropulper w/Auto Feeding Conveyor (2017) - stainless steel hydropulper w/ 100 HP motor, 90" x 80" tall, w/ 47" x 44" x 31" dump hopper, including auto feeding conveyor; 2. BTG Instruments Consistency Control Unit - MnCPM-1300 type HX/Q0/C2/5/10 consistency transmitter unit; 3. Conical Refiner 75 HP; Kdodpenab Evjfx Ah Ejt 4. Taiwan Pulp Molding Co. Cleaner Screen (2017) - 30 HP;

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) comprising Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws 48:1 L/D ratio, co-rotating Kjdpjz Atiujfx Ah Eedt 12-barrel housing section, electrically heated and water-cooled Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox

Condition: good (used), Year of construction: 2000, machine/vehicle number: 1101188, GDW LZ 250 lead and feed screw lathe Year of manufacture: 2000 Centre height: 125 mm Centre distance: 500 mm Spindle bore: 38 mm Spindle mount: DIN 55027/4 Tailstock taper: MK 3 Speed range: 60 - 3,000 rpm, stepless Weight: approx. 600 kg Dimensions: approx. 1,300 x 700 x 1,400 mm With collet chuck mechanism Kdedox Slhdopfx Ah Ejt With Iskra digital readout

Condition: used, Year of construction: 2017, operating hours: 27,159 h, functionality: unexamined, machine/vehicle number: API834431, overall weight: 500 kg, Speed-regulated screw compressor Atlas Copco GA30VSD+ FF with integrated refrigerant dryer, manufactured in 2017. Serial number: API834431, motor power: 30 kW, connection: 400 V, 50 Hz, 3-phase, weight: 500 kg. Maximum operating pressure: 12.75 bar, delivery rate: 5.84 m³/min (97.4 l/s). Operating hours: 27,159 h, motor starts: 254,769, load cycles: 303,011. Control panel with color display, menu navigation in German. Kodpfxoz A Udwj Ah Eedt Location: Homburg (Saar), Germany. Inspection possible by appointment. Price on request, net plus VAT, ex location; dismantling and loading by arrangement. All information without guarantee.

Condition: excellent (used), Year of construction: 2011, 16768 MANUFACTURER: KAESER MODEL: SK25 Serial No.: 1015 Year: 2011 Power (kW): 15 Output (m3/min): 2.25 Pressure (bar): 11 Operating hours (DOC/TOTAL): 19238/36933 Frequency inverter: no Built-in dryer: no Heat exchanger: no Cooling (air/water): air Kdjdpfx Ahsy Sitdo Est Mounted on tank: no Documents: no Connection: 3/4

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, Equipment: documentation/manual, 🔷 TOPNC HMT-i500 – 5-Axis Turn-Mill Center Demo Machine – As New – Available at Short Notice – German Service For sale is a high-precision 5-axis turn-mill center TOPNC HMT-i500, used exclusively as a demo machine and in mint condition. This machine combines turning and 5-axis milling in a single setup – for maximum efficiency, precision, and reduced cycle times. ⚙️ Technology Concept ✅ 5-axis simultaneous machining ✅ Complete machining in one setup ✅ Torque motor direct drive (B-axis) ✅ Fully closed control loops (linear encoders) ✅ High rigidity machine structure (monolithic design) ✅ Thermally stable machine construction 👉 Result: highest accuracy + minimal non-productive times + maximum process reliability 📊 Technical Data (Excerpt) 🔹 Machining Max. machining diameter: 500 mm Max. turning length: 800 mm Bar capacity: Ø 74 mm Travel (X/Y/Z): 500 / 200 / 850 mm 🔹 Milling Spindle Speed: 12,000 rpm Power: 22.2 kW Torque: 45 / 54 Nm Taper: HSK-T63 Through-spindle coolant: Standard 🔹 Turning Spindle Speed: 3,000 rpm Power: 30 kW Torque: 280 / 420 Nm Chuck size: 10" 🔹 B-Axis (Swivel Head) Swivel range: 240° Direct drive (torque motor) Torque: 360 / 685 Nm Holding torque: 1,500 Nm 🔹 Dynamics & Precision Feed rate X/Y/Z: 30 / 30 / 36 m/min Resolution: 0.001 mm / 0.001° 🔹 Tool Magazine Capacity: 24 tools Max. tool length: 300 mm Max. tool weight: 7 kg 🔹 Machine Dimensions: approx. 6000 x 2400 x 2300 mm Weight: approx. 8 t 👉 All data according to technical datasheet 🧠 Equipment & Features High-precision ball screws & linear guides Fully automatic central lubrication system High-pressure coolant + through-spindle coolant Chip conveyor + coolant system Tool measuring system & workpiece probe (optionally integrated) Kedpsyywgbsfx Ah Esdt Automatic door Oil mist extraction Servo tailstock 👉 Designed for continuous industrial operation 🖥️ Control TOPNC rocOS (5-axis simultaneous) or Siemens SINUMERIK 840D sl 👉 Industry standard for demanding applications 🏭 About TOPNC / VECTRIX TOPNC Shanghai is one of the leading CNC manufacturers in China in the field of 5-axis and mill-turn technology. 👉 Represented in Europe by the VECTRIX Group GmbH 🇩🇪 German headquarters & service in Nordenham ✔️ Spare parts & technicians available in Germany ✔️ Fast response times ✔️ Long-term support 👉 No risk – structured industrial support in Europe 💡 Why this machine? Demo machine = as new + price advantage Immediately available – no lead time Fully equipped Perfect for demanding manufacturing (aerospace-ready, medical technology, etc.) 💰 Price List price: €455,000 👉 Special price for demo/stock machine: approx. €355,990 incl. installation Location: Germany Machine can be inspected under power We are happy to send you: Videos & machining examples Individual ROI calculation Technical consultation 👉 Inquire now – these machines are off the market quickly

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 Kdsdpjx Dihcsfx Ah Est - water-oil separator with new filling - filter set with new inserts