Used Lathes Bed Plan for sale (11,968)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 500 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 500 mm, spindle motor power: 15,000 W, rotational speed (max.): 4,000 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,900 mm, quill travel distance: 210 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, spindle nose: 6, Equipment: documentation/manual, rotational speed infinitely variable, CNC Fanuc 18i - T CAPABILITIES: Max. workable diameter from bar stock: 54 mm Max. workable diameter from chuck: 250 mm Max. workable length: 500 mm Max. rotating diameter: 520 mm MAIN SPINDLE: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 6’’ Spindle bore: 80 mm Chuck diameter: 250 mm Motor power: 11/15 kW (50%) TAILSTOCK: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 5’’ Spindle bore: 52 mm Chuck diameter: 165 mm Motor power: 5.5/7.5 kW (50%) BI-DIRECTIONAL TURRET: Number of positions: 12 Rotation time: 0.6 sec POWERED TOOLS: Number of positions: 6 Rotation range: 50 – 3,000 rpm Motor power: 3.7 kW (50%) C-AXIS: Type: CS (direct drive) Minimum programmable value: 0.001° Max. rapid traverse: 80 rpm AXES: X-axis travel: 210 + 5 mm Z-axis travel: 500 + 10 mm B-axis travel: 510 + 5 mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 20 m/min B-axis rapid traverse: 24 m/min COOLANT: Hodpfxsz Ig Uro Aitsnu Tank capacity: 200 Lt Pump flow rate: 100 Lt/min DIMENSIONS: Overall dimensions with chip conveyor: 4,000 x 1,900 x 1,800h mm Weight with chip conveyor: 5,000 kg Machine complete with: • Drilling kit with tailstock on B-axis for simultaneous drilling and turning • 9 bar pump • Chip removal paddle L 150 mm • Monitoring system • Spindle bore 71 mm • Simple collet chuck, Morse taper 42 • Chuck diameter 165 mm • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2024, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL MACH-ID 9822 Make: QuickTech Type: T6 MILL Control: Mitsubishi Touch YOP: 2024 Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Pinole taper: 4Mk Stroke pinole: 70mm Hnedpfsz H I Haex Aitju Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Hjdpfoz Ng I Aex Aitenu Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Hnodpfxszhaqvs Aitou Number of Tool positions 8

Condition: used, Year of construction: 2002, x-travel 3000 mm Hsdpfozrpnrex Aitonu y-travel 1600 mm z-travel 1500 mm table-size (2x) 2000 x 2000 mm control TNC 430 B spindle turning speed range 60 - 3600 U/min spindle taper ISO 50 feeds mm/min table load 10 t milling drive 28 kW total power requirement 48 kW weight of the machine ca. 47 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Machine has 6 axes controled, X/Y/Z, C- axe table rotation and A/B axes for universal head. Machine has a 40 position ATC, cooling through spindle, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and two pallets in the pallet changer. Machine in program 22.347 hours.

Condition: used, Year of construction: 1985, used in excellent condition low mileage cleaned functionally tested partially refurbished Manufacturer: Flott Type: 484001 Year of manufacture: 1985 Machine no.: 31840024 Manual copying device Fixed tailstock Hodpfx Aisz Np Irstenu Four-jaw chuck Drill chuck mm: 125 Speed stages: 500 - 750 - 1125 - 1700 - 2500 Center distance approx. mm: 1200 Center height approx. mm: 240 Motor kW: 1.5 Space requirement approx. L x W x H mm: 2100x800x1100 Weight approx. kg: 350 Total connection value kW: 1.5 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: good (used), Year of construction: 2007, operating hours: 9,500 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, Hwachon Cutex-160 CNC lathe | Fanuc | C-axis | 4 driven tools | Fedek bar feeder For sale is a Hwachon QTX 160 CNC lathe, manufactured in 2007, with Fanuc control and extensive equipment. The machine comes from a small production facility/workshop and is available immediately. It offers a versatile range of features for the precise machining of workpieces and is suitable for both individual parts and small to medium-sized series. Technical data: * Manufacturer: Hwachon * Model: Cutex 160 * Year of manufacture: 2007 * Control: Fanuc * Max. turning diameter: approx. 300 mm * C-axis: available * Driven tools: 4 * Tailstock: available * Chip conveyor: available * Tool turret: including the tools shown in the pictures Including Fedek short bar feeder A Fedek short bar feeder is also included in the offer. The bar feeder is fully functional and can, of course, be demonstrated and tested during operation during an inspection. Condition and availability: The machine is operational and available immediately. An inspection and demonstration are possible after prior arrangement. Interested parties have the opportunity to inspect the machine on-site and be convinced of the functionality of the machine and the bar feeder. An interesting complete solution for companies looking for a compact CNC lathe with C-axis, driven tools, tailstock, chip conveyor, and automatic bar feeder. Inspection / demonstration: by appointment Availability: immediate Hodpfsz Nqdzjx Aitonu

Condition: used, Year of construction: 2009, machine/vehicle number: 97050022, turning length: 550 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 18,500 W, bar passage: 74 mm, The Saeilo Contur MSL 450 is a used CNC turning machine, manufactured in 2009 (first commissioning in 06/2009), equipped with a Siemens Sinumerik 810D control system. It can turn parts with a diameter of up to 350 mm and a length of up to 550 mm, with a bar capacity of 74 mm. This makes it suitable for chuck and bar work in small and medium-sized series. The machine is located in the Düsseldorf area and was operational during our inspection. TECHNICAL DATA - Year of manufacture: 2009 - Control system: Siemens Sinumerik 810D - Maximum turning diameter: 350 mm - Maximum turning length: 550 mm - Bar capacity: 74 mm - Maximum spindle speed: 3,500 rpm - Spindle drive: 18.5 kW - Tailstock: live center, with hydraulic quill actuation EQUIPMENT AND ACCESSORIES - Chip conveyor, Hwang Kang (hinged belt) - Tool holders, fitted - Turning and clamping tools - Setup tools CONDITION The machine was operational during our inspection on 01.10.2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Hnjdpfxoz H Uc Ie Aitju Suitable for flanges, bushings, bolts and shafts up to 550 mm in length, for example in mechanical engineering, hydraulics and contract manufacturing. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading and transport are organized by the buyer; upon request, we can provide you with contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Year of construction: 2007, condition: used, Offered for sale is a CNC lathe with tool turret. Technical specifications: Machine operating hours: approx. 20000h, main spindle bearings replaced at approx. 16000 machine operating hours. Control system: Heidenhain CNC control. Equipped with tool turret, tailstock, various clamping tools, tool holders, collets and additional tools as well as chip conveyor. Inspection possible by arrangement. Hnedjz N Halepfx Aitju

Condition: refurbished (used), functionality: fully functional, Weiler Primus lathe with lead screw and drive spindle. Includes tailstock. The machine can be inspected while powered on prior to purchase. Hnsdpfx Ajz Nh Epsiteu Shipping is possible for an additional charge. VAT can be shown separately.

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U dimensions of the machine ca. 3,5 x 1,6 x 1,7 m Hnodpfx Aet Tqgxoitju total power requirement 9 kW weight of the machine ca. 4,5 t Machine has a 4 position tool holder, a three jaw chuck, a rotating center and a taper gauge.

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Hodpfx Aoz Rnrroitonu Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: good (used), Year of construction: 2012, CNC turning/milling center Spinner Type/Model TC 600 52 Control Siemens Sinumerik 840D sl; with SHOPTURN Condition Used Year of manufacture 2012 Technical data Max. swing diameter 600 mm Max. turning diameter 400 mm Max. turning length 650 mm Travel X/Y 275 mm / 700 mm Max. rapid traverse X/Z 15 / 24 Turning spindle Max. speed 5,000 rpm Chuck size 210 mm Spindle power 18 kW Max. torque 113 Nm Spindle nose A6 Max. bar diameter 52 mm Turret Tool positions 16 Tool holder VDI 30 / DIN 69880 Tailstock taper MT 4 Machine dimensions (L x W x H) approx. 2500 x 1600 x 2000 mm Machine weight approx. approx. 5,000 kg Equipment / Features Tool measuring arm Power chuck SMW Autoblok BH-D 210-52-3-A06 including jaw sets Chip conveyor TC600 Enlarged, L-shaped coolant tank, approx. 180 liters with centrifugal pump 50 l/min; 3.3 bar Foot switch for CNC tailstock Hnsdpfxez H If Ne Aitou Inquiry item: Transportation costs in a separate quote.

Condition: like new (used), Year of construction: 2024, MAZAK QUICK TURN 200MSY Max. machining diameter: 380 mm Max. machining length: 575 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: Hnsdpjzgw Icjfx Aitju - CNC control: Mazatrol SmoothG - Hydraulic KITAGAWA 3-jaw chuck BB-208 for main spindle, diameter 210 mm - Hydraulic KITAGAWA 3-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Robot interface - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Hnsdpfxjzv D H Rj Aitou Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: reconditioned (used), Year of construction: 2007, Self-learning lathe, 230x1000; refurbished machine with general inspection and adjustment, and replacement of screws and bearings on the Z-axis and bearings on the X-axis. Bar passage: 58mm CNC: FAGOR 8055 Year of manufacture: 2007 Complete with: Self-centering chuck Chip conveyor Manual tool turret with CAPTO C4 interface Toolholder set Collet set Hnsdpov Nqulsfx Aitou Manuals and CE certificate

Condition: used, Year of construction: 2013, Technical details: turning diameter: 38 mm Article: CNC Long-turn automatic lathe Manufacturer: Hanwha Type: STL38H Year of construction: 2013 Control: Siemens 840SL for 8 axes Main spindle: max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48 Counter spindle: max. pick-up diameter: 38mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42 Tool turret: n max. 6,000 rpm Power max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder FMB Turbo 5-55 High-pressure station SFB-301 eco 150bar Please, contact us for getting more information and pictures on mail(at) or Hnsdpfx Aistv Sdfotsu *

Condition: good (used), Year of construction: 2016, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 762 mm, bar passage: 75 mm, CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis 3-jaw chuck and collet chuck device Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device Iemca Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm Hodpfx Ajyt Hp Deitonu max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchmesser / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min. Gewicht der Maschine ca. / weight ca. 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, turning diameter: 330 mm, center width: 650 mm, 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Hjdpfx Aiswtx A Dstonu Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1500 mm table-size 3200 x 1100 mm control TNC 430 B spindle turning speed range 60 - 4000 U/min spindle taper ISO 50 feeds mm/min Hjdpfx Aiszrpnxotjnu table load 10 t milling drive 24 kW Center of spindle to wall or column 1229 mm total power requirement 50 kW weight of the machine ca. 22 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Universal milling head is automatically swivable and turnable in 1,5° steps. Machine has a 20 position ATC, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and a mist cooling arrangement. Machine in program for 25.616 hours.

Condition: used, Year of construction: 1992, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout Hjdpfx Aozwn Egeitsnu - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Hnedpfx Aiszd S S Rstou Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - Max. turning length: 1200 mm - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimensions of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units - Additional 3 cutting tools on hydraulic pistons (2 installed) - 4 types of spindle speeds - Automatic or manual machine operation - Spindle motor: 9 kW Hodpszu R S Rjfx Aitenu - Hydraulic pump motor: 3 kW - Diameter of extraction port: 90 mm - Dimensions for transport (L/W/H): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit - Original DTR documentation - Unpainted - Used lathe, very good condition Net price: 57,900 PLN Net price: 13,465 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, Combined copying milling machine - lathe MICHÄL KÄMPF Hedpfez Hw Rzox Aitonu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Hnjdpfx Aoz Hfqijitou Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm 8-position turret Chip conveyor