Used Knee Type Milling Machine for sale (86,214)

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine Nkedpfx Adoyddk Te Not CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm Nkedpfx Adowh N Uye Njt D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Njdpfex Ifdkox Ad Nskt Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Nsdpox Iuguofx Ad Nekt Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new, February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load capacity: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Drives linear axes Drive technology: linear motor Feed rate X/Y/Z-axis: 40–60 m/min Axis acceleration X/Y/Z: 3–5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Dimensions & weight Machine space requirement: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring - 40 bar ICS coolant supply with belt filter system - 11 bar external coolant supply, face end - 30-position tool changer, expandable by 20 additional positions - Renishaw RMP60 / Renishaw touch probe Nodpfxox Npmre Ad Nokt - BLUM tool measurement and tool breakage control

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Nksdpfx Adsya U Uus Not Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: used, Year of construction: 2009, x-travel 3.500 mm y-travel 1.200 mm z-travel 1.250 mm Control HEIDENHAIN TNC-530 table-size 1.250 x 1.250 mm table weight 4.000 Kg feeds 12.000 mm/min Number of revolutions 4.000 rpm power capacity 24 kW taper ISO 50 DIN 69871 AD spindle head Automatisch 2,5 x 2,5 Grad handwheel Heidenhain HR-410 Nkodexwzf Hjpfx Ad Njt internal coolant system feed 20 bar total power requirement 46 kW weight of the machine ca. 18.000 kg dimensions of the machine ca. 7.800 x 4.850 x 3.530 mm -Integralverkleidung -Doppelter Längsspäneabsauger -Querspanabsaugung -500-l-Tank mit Magnetabscheider-Papierfilter

Condition: like new (used), Year of construction: 2019, travel distance X-axis: 6,300 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 1,800 mm, table length: 6,300 mm, table width: 3,600 mm, spindle speed (max.): 2,500 rpm, GANTRY MILLING MACHINE DYE CNC SIEMENS (RETROFIT 2019) TECHNICAL SPECIFICATIONS Brand: Dye (Retrofit) CNC: Siemens 840D Year: Retrofit 2019 Table: 6300 x 3600 mm X-axis: 6300 mm Y-axis: 3600 mm Nksdoydbhpjpfx Ad Not Z-axis: 1800 mm W-axis (Quill): travel to be confirmed Head magazine: 4 positions Includes 1 automatic 360° angular head Tool magazine: 60 tools Spindle motor: 40 kW PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, and handwheel) ICS: Internal coolant supply, 36 bar Nodpfxjhy At Ae Ad Nokt Rotary Table: 1600 x 1200 mm – double motor drive system Additional Equipment: Chain-type tool changer with double gripper, 40 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimeter enclosure Accuracies: Positioning accuracy: 0.015 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm control HEIDENHAIN TNC 360 total power requirement / kW weight of the machine ca. / t Nkjdev H Ertspfx Ad Not required space / m

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Njdpjxdnraefx Ad Nskt Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: good (used), Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, GANTRY MILLING MACHINE The Techmill Laborshape (2013) is a large-capacity 5-axis machining center, primarily designed for high-speed machining of composites, resins, and light alloys—highly sought after in the aerospace and automotive prototyping sectors. CNC Control: The Siemens 840DSL with Shopmill is an industrial standard still relevant in 2026, ensuring straightforward maintenance and good compatibility with modern CAD/CAM software. Cutting Capacity: The HSK 63A taper is ideal for High-Speed Machining (HSM). Limiting use to 12,000 rpm (from 18,000 theoretical) has preserved the bearings and geometric accuracy. Key Benefit: The spindle reconditioning in 2023 is a crucial selling point, eliminating the main financial risk for a used buyer of a 13-year-old machine. Working Envelope: The travel dimensions (3000 x 2000 x 1250 mm) are highly sought after in aerospace and marine industries. Nkjdeyak Dxjpfx Ad Njt

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,050 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, total length: 8,500 mm, table length: 2,000 mm, table width: 1,250 mm, total width: 7,500 mm, spindle speed (max.): 6,000 rpm, total height: 5,020 mm, Equipment: rotational speed infinitely variable, CNC travelling column machining centre manufactured by MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden, designed for precise and heavy-duty machining of large-format workpieces. The machine features a classic travelling column design and is particularly suitable for tool, mould, and mechanical engineering. Equipped with a Heidenhain TNC 430 M CNC control. Distance spindle nose – table: Vertical: approx. 300 – 1,350 mm With universal milling head (UFK): vertical: approx. –290 to +760 mm horizontal: approx. –55 to +995 mm in table area: approx. 180 – 955 mm Spindle / Speeds: Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal milling head (UFK): 10 – 4,000 rpm Universal milling head (UFK): Rotation about vertical axis: 360° (indexing 2.5°) Swivel about horizontal axis: ±110° (indexing 2.5°) Electrical data (nameplate): Connected load: approx. 68 kW Nedpoycw I Ajfx Ad Nekt Nominal voltage: 400 V / 50 Hz Control voltage: DC 24 V Auxiliary voltage: 230 V Total weight: approx. 57 t CE-compliant, Made in Germany

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 87342, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, total length: 9,000 mm, table width: 2,000 mm, total width: 4,000 mm, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, rapid traverse Y-axis: 2,000 m/min, type of input current: three-phase, overall weight: 55,000 kg, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, input voltage: 400 V, coolant supply: 20 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Swivel Head 2-axis swivel head with A-axis ±90° (180°) and B-axis 360°. Version with Hirth gearing and hydraulic clamping. Spindle / Drive AC hollow-shaft spindle motor, 25 kW at 100% duty cycle, 40 kW at 40% duty cycle. Speed up to 10,000 rpm, tool interface SK40. Nksdpfjycw D Rex Ad Not Tool Changer Chain magazine with 22 tool stations. Equipment Chip conveyor available.

Condition: new, Year of construction: 2026, Machine Characteristics Powerful axis servomotors allow stepless feed adjustment in all three axes, providing precise machining performance. Telescopic covers on the Y-axis protect the feed spindle from contamination and damage. Universal milling head tiltable in two planes allows for an easy change from horizontal to vertical machining. The combination of both tilt planes enables almost any head angle, increasing machining flexibility. Technical Data Table dimensions 1800 × 400 mm Table travel (X/Y/Z) 1300 / 450 / 600 mm X-axis feed rate 25 – 800 mm/min Y-axis feed rate 25 – 800 mm/min Z-axis feed rate 8 – 267 mm/min Spindle taper 7:24 ISO50 (H) 7:24 ISO50 (V) Upper arm travel 700 mm Distance between vertical spindle and table 200 – 850 mm Distance from horizontal spindle axis to arm surface 200 mm Spindle speed range 50 – 1520 rpm (Vertical) 60 – 1850 rpm (Horizontal) Number of spindle speeds 12 / 12 T-slots (number / width / spacing) Nsdpfx Aeycu Iajd Nekt 3 / 18 / 100 mm Spindle motor power 5.5 kW (Horizontal) / 7.5 kW (Vertical) Feed servodrive torque 12 N·m Overall dimensions 2245 × 2100 × 2000 mm Weight 3580 kg Equipment Depending on Version 3-axis digital readout (DRO) Lighting system Cooling system Central lubrication system Vertical and horizontal spindles Table feed in X, Y, Z axes ISO50/ER arbor with collets 4–16 mm ISO50/MK4 arbor Horizontal spindle support Two long arbors for horizontal spindle Set of operating tools CE declaration of conformity User manual Factory-new machine under warranty

Condition: used, Year of construction: 2003, x-travel 4.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain iTNC 530 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar Nsdpfx Adoxylqro Nokt - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, Rotary table 1,250 x 1,400 mm (interference circle 1,700 mm) Heidenhain 530 Diagonal milling head with 1° x 1° indexing Speed up to 5,000 rpm Tool holder SK50 Tool changer with 40 positions Internal coolant supply with 19 bar Chip conveyor in longitudinal direction Nkodpfjx Iuccex Ad Nst

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Nsdpfxex I A Hvj Ad Nokt Spindle speed up to 6,000 rpm Tool holder SK50 Internal cooling with 36 bar Longitudinal chip conveyor + cross conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 4,000 rpm Tool holder SK50 Internal coolant supply with 22 bar Longitudinal chip conveyor Njdpfx Adex I A Hij Nekt

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,100 mm, CNC 5-axis Gantry Milling Machine BELOTTI Eureka 4014 (4000x1400mm) 5-axis milling machine / machining center Belotti Eureka 4014 Model 3414. Year of manufacture 2001. Machine in stock, in good condition, fully functional. Available immediately, including a refurbished spare 4kW spindle, software, and complete documentation. Primarily intended for trimming and milling 3D parts – plastic, carbon, laminate, MDF, wood, aluminium, etc. Spindle speeds: 18,000/600Hz – 24,000/800Hz Transport can be arranged. Axis travels:    • X-axis: 4,000 mm    • Y-axis: 1,400 mm Njdpfoycin Ijx Ad Nokt    • Z-axis: approx. 1,100 – 1,200 mm

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm Nkedpfjxzuz Nox Ad Njt z-travel 1500 mm Control Heidenhain 355 weight max. 10 t ja more pictures available

Condition: used, Year of construction: 1990, x-travel 1100 mm y-travel 600 mm z-travel 600 mm Control Heidenhain 355 weight max. 10 t Nksdpfowf Etyox Ad Njt head swivability ja ° ja table length 1200 mm table width 550 mm serial number A12055

Condition: used, Year of construction: 1999, x-travel 4500 mm y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Nodpfowhqyqjx Ad Njkt Cube 2 weight of the machine ca. 20.000 t

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Njdpfxjf Tdvbo Ad Nekt Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 700 mm, table load: 3,500 kg, table length: 2,000 mm, total height: 2,700 mm, total width: 2,400 mm, total length: 3,700 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, overall weight: 9,000 kg, power: 24 kW (32.63 HP), 🔹 Nicolas Correa CF17D Milling Machine – Undergoing Complete Overhaul in Our Saulnes Workshops 🔹 Are you looking for a reliable, high-performance milling machine professionally refurbished by experts? This Nicolas Correa CF17D is currently undergoing a comprehensive overhaul in our LMIR workshops and will soon be available for sale. 🔧 Work performed: • Head fully reconditioned with original CORREA bearings and gears replaced; • Complete mechanical overhaul; Nsdpfjycdbpjx Ad Nekt • Ongoing paintwork and cosmetic refurbishing: protective windows, guarding, aesthetic components; • Thorough cleaning and full technical inspection prior to delivery. 💡 It will be delivered with: • HEIDENHAIN TNC-410 CNC control; • Hydraulic tool clamping system; • Tool kit and complete technical documentation. 💡 Guaranteed precision and reliability—perfect for immediate return to production once refurbishment is complete. 📍 Available for viewing in our Saulnes (France) workshops – Visits by appointment. 📦 Delivery upon request. 📞 Contact us now to schedule a visit or to request further information. Photos after overhaul coming soon. 🔹 LMIR – Your partner in industrial machine tools for over 50 years 🔹