Used Laboratory Furnace for sale (2,089)

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Ijdjuv Eudspfx Ah Neal Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Isdpsm E Tvhefx Ah Noal Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Year of construction: 1999, condition: good (used), Chamber hardening furnace K 1150-2 Rated temperature: 1150 °C, 5.0 kW 400 Volt Usable space: 225 mm width, 215 mm height, 300 mm depth External dimensions: 525 x 595 x 650 mm Heating-up time: 2.5 h Isdpfsxwqhksx Ah Nsal 75 kg With base frame

Year of construction: 1992, condition: used, max. temperature 1100 Grad size of opening ca. 250 x 120 mm Iaedpfx Ajw Rrf Ssh Nel depth of chamber ca. 290 / 310 mm heating capacity 2,7 kW control "Thermocomputer TC 5040"

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Maximum temperature: 200 °C Iaedpjvgy Ivofx Ah Njl In the past, the oven was part of a plant and the product was transported via a conveyor belt, The oven was previously controlled by PLC, it was dismantled,

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Iaedpfjxz Divjx Ah Nel

Condition: good (used), EA Electric Automatic Iaodpouv Ewrofx Ah Nel Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: new, Year of construction: 2025, Powder coating oven The oven is designed for drying elements painted with water-based and solvent-based varnishes. Working dimensions (mm): 1500 (w) x 4000 (d) x 2000 (h) Technical data: • Power consumption: 59 kW. Equipment: • Top transport, • Touch control panel, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the workpiece heating process), • Locks for safe opening and closing, • Time module, • Thermoregulator (controls the temperature inside and maintains it at an appropriate level), • The oven is equipped with rails for easy transport. Iodjg Ib Epopfx Ah Njal • Maximum working temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI Iasdpfxovcyf Te Ah Njl year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small bars with dimensions from 10x10 to 22x22 mm and lengths up to 300 mm. The loading feeder sorts the workpieces and automatically loads the inductor with each item for heating. The throughput is very high. For small components, heated parts at up to 1100 degrees are available every 6 seconds. Two inductors are included for heating materials of up to 20mm and 16mm in thickness. The furnace can be adapted to suit your specific requirements. The cost of replacing the inductor with models for different sizes is around 3,000 EUR. The machine is highly versatile regarding the size of products to be heated. Ijdpfxsw Hqlde Ah Neal Capable of heating flat bars, round bars, or square bars. The complete machine consists of a generator, induction furnace with inductor, bar feeder, and chiller.

Condition: good (used), Internal dimensions: 600 x 600 x 600 mm Max. Temperature 70°C Iedsh Eilvjpfx Ah Neal

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are selling our Hach DR3900 Laboratory VIS Spectrophotometer with RFID* Technology that has been very sparcely used. This machine is reliable, lab-grade water testing with smart connectivity for efficient, accurate, and compliant results. The machine can be used on multiple applications: Applications: -Groundwater -Membrane Protection -Municipal Water -Potable Water Iasdpfx Ajxyx U Djh Nsl -Pre-Treatment -Production Water -QA/QC Lab -Surface Water

Condition: excellent (used), Here we offer a GRIESER tripod dissolver laboratory. Product: Grieser laboratory tripod dissolver Type: GFD 11 LST Purpose: The machine is designed for mixing of powdery solids, liquids and pastes as well as to the work of fillers. The viscosity range can be from low viscosity to Pasty range. Machine design: The laboratory stand dissolver consists of machine frame, the Lifting device, the drive for mixing tool, the telescopic hood with Spring contact pressure, the Collet and the control panel (non-ex) with control and compact controller. The container (customer) and the telescopic hood form one in working position closed mixing room. The hood is intended, a hose connection It is used according to the purpose. The drive of the mixing tool with a speed adjustment is by means of Frequency converter fitted. The arrangement, performance and speed of the Motors are indicated in the enclosed drawing of the project. On the display of the compact controller can the speed of the mixing tool, the Mixing time / mixing time, mixing sequences, as well as other functions are displayed be. Operation Switching on and off is done via corresponding buttons in the control cabinet Lifting of the mixing tool drive Lifting is carried out of the hub motor is switched on. This runs only as long as the Push button (2-hand safety circuit on-on) is pressed. After releasing Ijdjd Edm Sopfx Ah Neal the button

Condition: good (used), Hello, For sale: Chamber hardening furnace POK 73.1. The machine is fully operational and in continuous use, with the possibility of inspection and testing. Iedpfx Ahsxykcaj Nsal The listed price is net and VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Phone contact available from 7:00 to 16:00.

Condition: ready for operation (used), Various machines from a dental laboratory for the processing of dental restorations are available. 1) Grinding and cutting machine (plaster trimmer) Reco GMT 5330, speed: 1500rpm, grinding wheel diameter: 250mm, bore: approx. 15mm. 2) Dental ceramics furnace Vita Inceramat, max. temperature: 1200°C, firing chamber height: approx. 80mm, machine dimensions X/Y/Z: approx. 500mm/400mm/600mm, weight: approx. 25kg. 3) Model drilling unit Whaledent Pindex P-110. 4) Fine blasting device Renfert Basic Duo, operating pressure: 2bar-6bar, blasting medium containers: 2, mixing principle: Venturi, machine dimensions X/Y/Z: approx. 450mm/400mm/300mm, weight: approx. 10kg. Documentation available. A visit on site is possible. Iodpfx Ahjxx Ufce Njal

Year of construction: 2001, condition: used, machine/vehicle number: 12117, Continuous Furnace / Brazing Furnace Iaodpfx Aswku N Ush Njl Max. operating temperature: 1120°C Normal operating temperature: 1050°C Conveyor Belt: Useful width of conveyor belt: 250mm Useful height of conveyor belt: 150mm Heating Chamber: Heating Chamber Length: 1530mm Heating Chamber Width: 500mm Height: 500mm Installed Power, Gas: 33kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400/230V Frequency: 50Hz You are welcome to visit us by appointment.

Condition: refurbished (used), Heating: electric Air circulator: 1 Temperature: 400°C Internal dimensions: (approx.) Iaodpjtukp Esfx Ah Nol Width: 700 mm Height: 450 mmX Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Depth: 2500 mm Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V)

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU Iedpewrtbxofx Ah Neal S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W Ijdjw S T Rlspfx Ah Nsal For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Year of construction: 1996, condition: good (used), Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Temperature: max. 1,000 °C Ijdpfjxr Awtjx Ah Nsal Heating: Natural gas heated Quench: Oil/Air Equipment: Control Siemens Simatic

Condition: used, Push-through furnace system, make LOI Iaodpoxxa D Rsfx Ah Nol Batch dimensions: max. 1200x780x400 (L x W x H) Total output: 565 kW Burners: LBE Reku burners & radiant heating tubes Gases used: Endogas with air and natural gas as enrichment gases

Year of construction: 1994, condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces - Fumigation boards per system - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier Iodpfxjxr Avvj Ah Noal - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 2002, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine Iasdpsxr Avpofx Ah Nel - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Iedpfjxr Aviex Ah Njal Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg Iajdsxr Avcjpfx Ah Nsl - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.