Used Laboratory Furnace for sale (2,123)

Year of construction: 1999, condition: used, functionality: unexamined, Natural gas-fired, removable rack-type batch furnace for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Width: 1,000 mm Height: 1,150 mm Isdexfi Ulepfx Adnoa Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Reverse flame exhaust 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Iodpfx Ajxfcdyednja Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: excellent (used), Here we offer a Heraeus dryer with air circulation. Technical data UT 6760 Dimensions: External housing: width 1200 mm x height 1838 mm x depth 790 mm Internal dimensions: width 1000 mm x height 1319 mm x depth 522 mm Iodeup U T Uopfx Adnsa Temperature range 300°C Rated voltage 3N/PE 50 Hz 400 V 9.6 A 6.3 kW 689 liters Weight empty 241 kg Type: UT6760

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm Iedpfjt Ebpusx Adnea Electrical connection: 400 V kW Space required: 1200 x 870 x 1810 mm Weight: 470 kg Heating output: 16.5 kW

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Iodsxdantjpfx Adnja

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C Ijdpfsxc D E Hox Adnsa PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP plasma generator: MAG-Puls was newly acquired in 2008

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C Ijdpfoxcybkjx Adnsa - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm depth of chamber 680 mm volume 60 L voltage 380 V Iodpfsi Db Dbsx Adnea total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817

Condition: like new (used), Binder M 115 laboratory dryer – ex demo model from 2024 Isdpfxewp Hm No Adnea We offer a Binder M 115 laboratory dryer in ex demo condition, manufactured in 2024. The device was used only for demonstration purposes – it is fully functional, tested by the manufacturer and practically like new. The M 115 model is a precise laboratory dryer with forced air circulation, designed for fast and even drying and heat treatment of samples. Thanks to the possibility of programming work cycles, the device works well both in standard applications and in processes requiring repeatability and control of thermal conditions. Key parameters: • Year of manufacture: 2024 • Technical condition: ex demo – like new • Chamber capacity: 115 liters • Temperature range: from +10°C above ambient temperature to +300°C • Air circulation: forced (with fan) – fast and even temperature distribution • Controller with programming: possibility of setting cycles in real time or interval • Temperature protection: class 2 according to DIN 12880 • USB / Ethernet interface (depending on the version) for data logging Dimensions: • Interior (W × H × D): approx. 550 × 480 × 400 mm • External dimensions: approx. 710 × 790 × 605 mm • Power supply: 230 V, 50/60 Hz The device is ready for immediate use. Upon request, we will send photos, a test video and a price offer.

Year of construction: 2021, condition: as good as new (ex-display), It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Pump with 60 L capacity Iedpfxoigg E Ho Adnoa 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Used rotary hearth furnace with mandrel hardening press Make: Aichelin and mandrel hardening press MAP DHM 1-350 S / year of manufacture: 2004 Ijdpsw Rrxfjfx Adnea Type: Rotary hearth furnace Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm Ijdpfxjclupdo Adnsa height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: CN5ED08442, Nitech Pol Eko CLN 53 laboratory incubator, year 2007, serial number: CN5EC07031 Iedpjfiav Uofx Adnoa Applications: - Incubation of samples for microbiological determinations; - Analysis of the thermal resistance of the samples subjected to higher temperatures; - Antibodies; - Bacterial tests; - Crystallization observations; - Cultivation of thermophilic microorganisms; - Pharmaceutical stability tests; - Food industry distorting tests. Specifications: - Working capacity: 56 kg; - Temperature range: + 5 ° C above ambient temperature ... + 100 ° C; - Acid-resistant steel interior; - Door with horizontal opening; - Self-diagnosis; - System for restoring the work schedule in case of power failure; - Alarm based on temperature sensor - Natural air convection; - Number of interior shelves: 2, with adjustable height. Dimensions [mm]: - Ext. Width: 590 - Ext height: 700 - Ext depth: 620 - Int width: 400 - Int height: 390 - Depth int: 360 - Weight [kg]: 50 - Voltage: 230V 50Hz - Power [W]: 450 Impeccable functional and aesthetic condition. Price 900 Euro + VAT, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim romana.

Year of construction: 1988, condition: used, functionality: unexamined, machine/vehicle number: 26535, Heating: gas Fuel gas: propane Gas overpressure: 80-100 mbar Working temperature: 150-750 °C Heating output: 550 °C (300 kg/h steel) Max. permissible load weight: 350 kg gross Iodpevkwifefx Adnja Type of loading: automatic with loading device Type of unloading: manually via loading device Max. batch dimensions: 610x910x460 mm

Condition: excellent (used), Eppendorf 5702 centrifuge in very good condition. The F-35-30-17 rotor is designed for Eppendorf laboratory centrifuges and holds 30 conical Falcon tubes with a 15 ml capacity. This rotor is intended for use with the Eppendorf 5702 and 5702R centrifuges, reaching speeds of up to 4,400 rpm and a maximum RCF of 2,750 x g. Technical details: Rotor model: F-35-30-17 Ijdexatkaepfx Adnsa Capacity: 30 conical tubes Tube type: Falcon (15 ml) Maximum speed: 4,400 rpm Maximum RCF (relative centrifugal force): 2,750 x g

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] Iedpfx Aeug U Thjdnsa - voltage : 3 x 380 [V]

Condition: excellent (used), functionality: fully functional, Brabender Single-Screw Extruder – 19 mm / 60 L/D – with Extensive Accessories Technical Data & Features: • Screw diameter: 19 mm • L/D ratio: 60 • 6 heating zones • Equipped with degassing • Cooling: fan and water cooling • Control via Brabender PL 2100 controller – allows computer connection and process analysis Iodpfjw Iqidjx Adnea • Mobile unit with castors Accessories & Spare Parts: • Strand die • Flat film die • Temperature control units • Computer connection cable and interface • Various spare and wear parts Special Features: • Compact design • Ideal for laboratory and pilot testing • Comprehensive process monitoring and evaluation options • Ready for immediate use

Year of construction: 2025, condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine Isdecw Ipaepfx Adnsa - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Ijdpfjdz Srbsx Adnsa Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Year of construction: 1986, condition: used, functionality: unexamined, machine/vehicle number: 43563, Heating: Gas Fuel gas: Propane Isdpfx Adovkwqvensa Gas overpressure: 10-50 mbar Working temperature: 150-450 °C

Condition: excellent (used), Binder FED 400 Laboratory Oven Temperature range: from 5°C above ambient temperature up to 300°C – Classic.Line series - Stainless steel interior, powder-coated exterior Isdpfx Adsxanx Sonea - Digital temperature setting with 1°C increments - Digital controller with integrated timer - Timer allows setting switch-on, switch-off, and temperature holding time countdown from 0 to 99 hours 59 minutes - APT.Line preheating system - Digitally adjustable fan speed - Class 2 (DIN 12880) temperature safety device with visual alarm - Two chrome-plated shelves included as standard - Maximum number of shelves: 10 pcs - Maximum total load: 90 kg - Maximum shelf load: 35 kg - Dimensions including fittings and connections (L x H x W): 1235 x 1025 x 765 mm - Internal dimensions (L x H x W): 1000 x 800 x 510 mm - Computer interface: RS 422 - Net weight: 145 kg - Internal volume: 400 L - Power supply: 400 V

Year of construction: 2008, condition: not inspected (used), functionality: unexamined, power: 0.08 kW (0.11 HP), overall weight: 300 kg, total length: 1,170 mm, total width: 600 mm, total height: 700 mm, machine/vehicle number: 2-453-004192, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! MACHINE DETAILS Electrical data Voltage: 400 V Current: 16 A Power: 80 W Ijdpfx Aew Hrx Sednja Dimensions & weight Dimensions (L x W x H): 1170 x 600 x 700 mm Weight: 300 kg

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Isdpfxodz Srae Adnoa Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: good (used), Equipped with a patented compression mechanism that minimizes vibrations. Thanks to the FastTemp function, the centrifuge can cool down very quickly (about 8 minutes from 21°C to 4°C). Guaranteed temperature: 4°C at maximum spin speed. Low loading height (21.5 cm) facilitates easy insertion and removal of samples. Includes: Rotor: FA-45-24-11 Power cable: EU Max. centrifuge speed: 21,130 x g. Temperature range: -10°C to 40°C. Dimensions: 29 x 48 x 26 cm. Weight: 21 kg (without rotor). Power supply: 230 V / 50-60 Hz. Maximum power consumption: 350 W. Cooling does not work. Iedpott In Usfx Adnsa

Condition: like new (used), For sale: Binder FED 260 Laboratory Drying Oven – Ex Demo, Year 2025 We offer a high-quality Binder laboratory drying oven, model FED 260, originating from a showroom demonstration (ex demo). The unit was manufactured in 2025 and is in virtually as-new condition – tested by the manufacturer and ready for immediate use. Technical Specifications: • Model: FED 260 • Manufacturer: Binder (Germany) • Airflow type: Forced convection • Chamber capacity: 260 litres • Temperature range: +10°C above ambient to +300°C • Power supply: 230 V • Year of manufacture: 2023 • Condition: Ex demo – the device was used exclusively for display and demonstration purposes Advantages: • Excellent temperature uniformity throughout the chamber • Reliable and energy-efficient operation • Ideal for research, industrial, and quality control laboratories • Supplied complete with documentation and shelves Why choose this unit? • Attractive price compared to a brand-new model • No signs of use – the unit is in like-new condition • Immediate availability We can arrange transport throughout Europe. Iodov Nw Ncjpfx Adnoa