Used L Lathe for sale (66,559)

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts. Bodpsw Uf Tkofx Adrjli

Condition: good (used), Year of construction: 2012, L – Steil Band Schuma WA-MP 800x3000x 400 mm wide, metal plate belt ! Gurt ! year 2012 Bodpfxeqnvf Ue Adrsli price: 4.650 € contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) Bodpjzgufrsfx Adreli C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Blodjzgt U Sspfx Adrei Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Bodpfx Aozgt Urjdrjli Distance between centers: 1,200 mm Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Chuck size: 250 mm Axes: X, Z MACHINE DETAILS Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 81 mm, turning diameter: 99 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning length: 81.3 mm Maximum turning diameter: 99.1 mm X-axis: 300 mm Z-axis: 240 mm Spindle head: A2-6 Spindle bore: 33 mm Speed (variable): 4,000 rpm Spindle motor power: 11 kW Number of tools on the turret: 8 Number of driven tools: 10 MACHINE DETAILS Control: Fanuc 21iT Dimensions & Weight Machine dimensions (including chip conveyor): 290 x 235 cm Machine weight: 4,000 kg Dimensions of transformer station: 65 x 60 cm Weight of transformer station: 150 kg Overall dimensions (L x W x H): 2,600 x 2,300 x 2,400 mm Total weight: 3,900 kg Blodpfxjzfg E Io Adrei EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ML0313-000510, turning length: 1,275 mm, turning diameter: 481 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, The machine has only been in operation for approximately one year! MACHINE DETAILS Power supply: AC 380 V, 3 phases, 50/60 Hz Rated power: 36.11 kVA Full load current: 54.87 A Machine weight: 6,900 kg FEATURES CNC control with operator panel Tool turret Tailstock Spindle chuck Enclosed working area Long-bed design CE marking The following data is taken from a manufacturer's data sheet. The seller assumes no liability for its accuracy: TECHNICAL DETAILS Standard spindle chuck, main spindle: 12″ Maximum turning diameter: 481 mm Maximum turning length: 1,275 mm Travel distances Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Travel X-axis: 260 mm Travel Z-axis: 1,350 mm Main spindle Spindle speed max.: 2,800 rpm Spindle power max.: 35 kW Spindle torque max.: 1,613 Nm Tool changer Bledpfx Ajzf I Scodrji Number of tools: 10 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,633 x 2,394 x 2,110 mm Machine weight: 6,900 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: G1115-0025, turning length: 2,100 mm, turning diameter: 610 mm, spindle speed (max.): 1,500 rpm, bar diameter (max.): 165 mm, controller model: Fanuc i Serie, The machine is new and has no operating hours! TECHNICAL DETAILS Turning length: 2,100 mm Maximum turning diameter: 610 mm Y-axis travel: 150 mm Spindle Speed: 1,500 rpm Maximum bar diameter: 165 mm Torque: 2,990/2,459 Nm Spindle nose: A1-15 Spindle bore: 21" 2-speed geared spindle Tool turret Tool positions: 12 x BMT 75 Speed of driven tools: 4,000 rpm Axes and tailstock Tailstock: MT #6 Tailstock stroke: 120 mm C-axis available MACHINE DETAILS Control model: Fanuc i series Bedpfszdztdox Adroli Power: 45/37 kW EQUIPMENT C-axis Steady rest optional

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 0-240-14-3022, functionality: fully functional, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, cutting length (max.): 5,600 mm, stack height: 580 mm, TECHNICAL DETAILS Maximum cutting length: 5,600 mm Maximum cutting width: 5,600 mm Maximum panel dimensions with rear loading using a lifting platform: 5,600 mm x 2,240 mm Maximum stack weight on the platform: 10 tons Maximum stack height: 580 mm Saw blade projection: 125 mm Saw blade diameter: 450 mm Saw carriage feed rate during cutting: 5 to 150 m/min Saw carriage return feed rate: 150 m/min Program slider feed rate: 80 m/min Number of clamping devices: 9 Spacing of clamping devices: 75 mm / 275 mm / 475 mm / 1,075 mm / 1,775 mm / 2,475 mm / 3,275 mm / 4,075 mm / 4,875 mm MACHINE DETAILS Connected power of the main saw motor: 13.5 kW Connected power of the scoring saw: 2.2 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 Air cushion tables: 5 units, each 2,810 mm x 650 mm Control system: CAD-matic 4.0 Bjdpfxszhm Ris Adreli

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Total weight: 3,600 kg Operating hours (as of May 6, 2026) Operating hours: 9,243 h Machining time: 5,991 h EQUIPMENT Fully programmable B-axis Total of 9 axes Bsdpfx Adezfiipsreli Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, Emcomat Emco EM20D lathe with guide and draw spindle, manufactured in 1993. Year of manufacture: 1993 Center height: 200 mm Blodpfxezivhmj Adroi Turning length: 1000 mm The machine is in working order. If you are interested, we would be happy to provide you with information about other machines we have in stock. You are welcome to inspect the machine at our premises after prior arrangement.

Condition: excellent (used), Year of construction: 2009, Maximum height 180 mm Maximum distance between centers approx. 1000 mm Siegfried Volz Machine Tools Blodsziuybepfx Adrsi Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm Bsdpfxoumtbrj Adroli - Main motor power: 22 KW - Machine weight ab. 6,3ton The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Blodsy Drunepfx Adrei Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: used, YOM 2013 Chuck Size – 150mm Bar Capacity – 53mm Bledpey Dtuisfx Adrji Swing – 430mm Spindle Speed - 4,000 RPM Control - Siemens 802D Distance Between Centers – 1000mm X-Axis Travel – 220mm Z-Axis Travel – 1065mm Swing Over Cross Slide – 200mm Motor – 10 HP 4-Way Tool Post Tailstock Over Dimensions (Approx.) 2.75m x 1.3m Weight (Est.) 2800kgs

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Bjdpfx Adov I Ddqsroli Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Bljdpfeq N Ay Aox Adrei Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Bsdpsrfx Tnefx Adroli Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), Gap Bed machine 28” Between centers: 80” Blsdpfx Asnr Nl Sodrsi Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, Type: 25 x 120 Straight Bed Lathe Distance between centers: 72″ Swing over bed: 26″ Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Blodpfxjwmlcks Adroi Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced

Condition: used, mileage: 486,696 km, power: 335 kW (455.47 HP), first registration: 03/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle No.: 174-26 Mercedes-Benz 1846 Actros, COC available! Registered: 03/2026 * Tipping hydraulics * Tires in good condition * German vehicle * Euro6 D Inspection possible during our opening hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. Bljdpfjzirb Nsx Adrei All information is without guarantee - errors, changes, typos and prior sale reserved. Vehicle descriptions are explicitly not guaranteed specifications. We refer to our terms and conditions and ask you to familiarize yourself with them. Special equipment: Axle load - measuring device, work lights, equipment package: air conditioning, CB radio, air horn, driver assistance system: turning assistant, cab: with air suspension, suspension: front springs 7.5 t, 2 leaves, vehicle without MirrorCam external mirror camera, vehicle without radiator grille, vehicle without aerodynamically shaped underbody panel, luggage compartment on rear wall above, transmission 12-speed - type: G 211-12, integral rear, fender 3-piece, fuel tank: 390 liters aluminum, left, cooler box / refrigerator, engine brake reinforced, auxiliary drive MB 131-2c, wheelbase variant 3850 mm, frame lowering without air spring residual pressure control, frame overhang 1050 mm, fifth wheel coupling, low maintenance, interface fleet management system, drawers under dashboard, seat cover / upholstery: co-driver's seat velour, seat cover / upholstery: driver's seat velour, seats in the cab: driver's seat comfort sprung seat, sun visor outside, storage flap outside left, socket 12V / 15 A in the co-driver's footwell additionally, socket 12V additionally, socket 24V in the co-driver's footwell additionally, preparation / switch for lift axle on trailer / semi-trailer, preparation for work lights on rear wall of cab above, preparation for roof strobe, front axle straight, curtain sleeper cab, oil cooler transmission Additional equipment: Emission standard EURO 6, storage compartment above windshield with lid, axle configuration: 4x2, front axle load 7.5 t, Actros 5, Actros cab L, approach / front mirrors heated, trailer electrical and brake connection low, trailer socket 24V / 15-pole, step to cab on the left, exhaust to the right outside, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entrance fixed, cab: interior package chrome, cab: tilting device hydraulic, cab: L StreamSpace, 2.50 m, floor level, vehicle outline lights LED, suspension: leaf / air, power windows, vehicle without rear window, generator 100 A, regulated, speed limiter system, urea tank (AdBlue): 60 liters, rear axle with active lubrication, unregulated, rear axle bevel gear 440, body / structure: semi-trailer tractor, comfort bed below, comfort locking system, power steering pump electronically controlled, steering wheel with multifunction, air compressor 2-stage, air dryer heated, engine 10.7 liters - 335 kW R6 diesel (OM 470), engine variant OM 470, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat recovery, disc brakes front and rear axles, key

Condition: used, mileage: 508,433 km, power: 335 kW (455.47 HP), first registration: 03/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle No.: 173-26 Mercedes-Benz 1846 Actros COC available! Registration date: 03/2026 * Tilting hydraulic system * Tires in good condition * German vehicle * Euro 6 D Inspection possible during our opening hours, test drive upon appointment! For export sales, a deposit will be retained, which will be refunded upon receipt of the certificate of export. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is without guarantee - errors, changes, typing errors and prior sale are subject to change. Vehicle descriptions are explicitly not guaranteed characteristics. We refer to our general terms and conditions and ask you to take note of them. Bjdpfx Adezircgjrsli Special equipment: Axle load - measuring device, work lights, equipment package: climate control, CB radio, air horn, driver assistance system: turning assistant, cab: with air suspension, suspension: front springs 7.5 t, 2 leaves, vehicle without MirrorCam exterior mirror camera, vehicle without cooler grille, vehicle without aerodynamically shaped underbody paneling, luggage compartment on the upper rear wall, 12-speed gearbox - type: G 211-12, integral rear, mudguards 3-part, fuel tank: 390 liters, aluminum, left, cooler box / refrigerator, enhanced engine brake, auxiliary drive MB 131-2c, wheelbase variant 3850 mm, frame lowering without bellows residual pressure regulation, frame overhang 1050 mm, fifth wheel coupling, low maintenance, interface fleet management system, drawers under the dashboard, seat cover / upholstery: co-driver's seat velours, seat cover / upholstery: driver's seat velours, seats in the cab: driver's seat comfort sprung seat, exterior sun visor, external storage compartment on the left, 12V / 15 A socket in the co-driver's footwell additional, 12V socket additional, 24V socket in the co-driver's footwell additional, preparation / switch for lift axle on the trailer / semi-trailer, preparation for work lights on the upper rear wall of the cab, preparation for rotating beacon, front axle straight, curtain for sleeper cab, oil cooler for transmission Further equipment: Emission standard EURO 6, storage compartment above the windshield with lid, axle configuration: 4x2, front axle load 7.5 t, Actros 5, Actros cab L, heated approach / front mirrors, trailer electrical and brake connection low, trailer socket 24V / 15-pin, steps to the cab on the left, exhaust to the right, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab access fixed, cab: interior package chrome, cab: tilting mechanism hydraulic, cab: L StreamSpace, 2.50 m, floor level, vehicle outline lights LED, suspension: leaf / air, electric windows, vehicle without rear window, generator 100 A, regulated, speed limiter, urea tank (AdBlue): 60 liters, rear axle with active lubrication, unregulated, rear axle bevel gear 440, body / structure: semi-trailer tractor, comfort bunk below, comfort locking system, power steering pump electronically controlled, steering wheel with multifunction, air compressor 2-stage, air dryer heated, engine 10.7 liters - 335 kW R6 diesel (OM 470), engine variant OM 470, type of use: local transport, wheelbase not defined, ramp

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, Control unit: OKUMA OSP P300LA-e Swing over bed: D450 mm Swing over cross slide: D350 mm Max. turning diameter: 230 mm Max. turning length: 500 mm X-axis travel: 165 mm Z-axis travel: 470 mm Max. spindle speed: 5,000 RPM Drive capacity: 15 / 11 kW (20 min. / continuous) Bodpfxoziqp Se Adroli Spindle bore: D62 mm Turret: 12-station Max. tool size: 25x25 mm Tailstock quill taper: MT5 Weight approx.: 3800 kg Dimensions (LxWxH): 2600 x 1830 x 1700 mm Accessories and Equipment - Coolant system - Chip conveyor - 3-jaw chuck D250 mm - Built-in tool presetter arm - Foot pedals - Machine leveling feet - Manuals The machine has very low operating hours and is in like-new condition. Under power in our showroom.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and finishing machine, wide-belt sanding machine Kundig Brilliant with electronic segment sanding shoe, adjustable sanding head and paint finishing capability. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior construction companies, also suitable for paint intermediate sanding. Edge banding machine with combination head and electronic segmented pressure bar. Edge segments can be switched on and off. Segment width of the pressure bar 22mm (ideal for paint intermediate sanding). Pneumatically adjustable calibration roller, grooved rubberized roller with grit compensation. Drive motor 11kW. Infinitely variable belt speed of 3 - 15 m/s via frequency inverter. Belt feed speed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device workpiece-controlled. Constant table height approx. 950mm by adjusting the top part of the machine, allowing it to be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Carpet with adjustable vacuum blower, allowing even small parts to be held securely. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking mechanism. Bljdpfx Adsyxg N Norsi Dust extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller and the parameters of the segment sanding shoe. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment with feed activation, eliminating the need for constant re-measurement with the caliper. Programs for different sanding tasks can be stored and selected via smartselect. CE marking. Operating manual. 2 sanding inserts available. The four bellows have been renewed. Without the connection cable shown. Original paint, only a few spots have been touched up. Very good condition from a small company. Machine has approx. 1395 operating hours, i.e. approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2300kg. With a large, mobile storage table at the height of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm. Including various sanding belts from K80 to K400. The machine can be demonstrated on site after prior appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2013, Year 1978 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information Bledpfx Adoxmk E Usroi Changes and errors in the technical data and information as well as prior sale reserved.