Used John Henry Drill for sale (5,383)

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Blsdpsu Ng Irsfx Acyop Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: excellent (used), CATALOG NUMBER 6608 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Max drilling depth: 60 mm - Vertical drilling width: 60 mm - Adjustable drilling (up/down and at an angle) - Right/left drill bits, mounted with hex screws Bsdpfjh I N Sqjx Acyslp - Pneumatic clamps: 2 pcs - Table surface dimensions: 490x1040 mm - Height to table surface: 920 mm - Main motor: 2.2 kW - Operating pressure: 6-8 bar - Dimensions (L/W/H): 2830/1150/1320 mm - Weight: 442 kg - German manufacture - Original DTR documentation - Unpainted - Mobile Net price: 7,900 PLN Net price: 1,880 EUR (based on a rate of 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, The grinding machine was purchased by us in 2022 and was in operation for five months. This grinding machine greatly helped us to be independent from external service providers. The deep hole drills could now be quickly re-sharpened in-house, which also saved us a lot of money. The necessary grinding wheels, some of them new, are included in the delivery. Bledpfxjxrkqho Acyjp

Condition: used, Drills from 29 mm Drills up to 50 mm Bodpfoxpqv Ssx Acyjlp Reamers up to 39.6 mm

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. Bledoxppwnjpfx Acyjp 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1979, The machine is in very good condition, equipped with a digital display, and immediately available. Bjdpfx Acexq Rzqsyjlp Radial drilling machine Maximum height: 2,800 mm Maximum radius: 3,500 mm Spindle: 130 mm Maximum drilling diameter: 72 mm Table: 6,500 x 4,000 mm

Condition: used, Year of construction: 1982, Technical details: Blodpeu Ngxdofx Acyop dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles Bledpjdf S Rzofx Acyjp - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), 2.4 kW motor Stepless speed adjustment Electronic displays for height and speed Bsdpoxq Ri Uofx Acyjlp

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Blodpfx Acexpfhvoysp Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 600 kg, number of spindles: 21, SCM MB 63 multi-spindle drill, 21 spindles, 1.5 kW power, fully functional Blsdpjxqx U Esfx Acyjp

Condition: used, Year of construction: 2025, functionality: limited functionality, The W16 table drill is characterized by a rigid structure and great performance while maintaining small size. It has threading functions and a swivel work table with adjustable height. It is a machine that combines power and precision, which is important in various applications. Machine description Threading function Automatic change of the direction of spindle rotation during threading Manual change of direction of rotation using a foot lever High spindle stiffness Setting the required drilling/tapping depth The drive is transmitted via a belt transmission Height-adjustable work table, tiltable from -45° (left) - +45° (right), with the ability to rotate 360° on the column The base is equipped with 14 mm wide T-slots The belt transmission cover is equipped with a safety limit switch No vice included! Technical parameters Max. drilling diameter 16 mm Max. spindle quill extension 100 mm MK2 spindle cone Spindle speeds 480, 800, 1400, 2440, 4100 rpm Bljdjxqmntjpfx Acysp The distance of the spindle axis from the column is 193 mm Table dimensions 200x230 mm Base dimensions 528x360 mm Max. distance of the spindle tip to the table 315 mm Max. distance of spindle tip to base 556 mm Table rotation range in the horizontal axis ±45° Table rotation range around the column is 360° Motor power 750 W / 400V Weight 90 kg Included: B18 self-clamping drill chuck MK2 drill chuck shank WARNING!!! THE MACHINE IS RETURNED, DEFECT: SPINDLE BEAT.

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device Blsdpfx Acou Ng Hnsyep The machine is including accessories see pictures! *

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland Bodpfx Acow I R Tisyslp – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), Cross table 24x82 cm, motor 1.1 kW Bledpfx Aoxq Rihjcyop

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Bsdpfx Asxpfgljcyolp Tapping device Coolant system Documentation

Condition: good (used), Code: 0227 Brand: VALEX Bjdexnnimepfx Acyelp Model: TR 32 - CE Standard Pillar drill for wood, metals, aluminum, and various materials - CE Standard Technical data: Single-phase motor V. 220 - Power 1500 watt N° 12 speeds Max distance between spindle and base 1050 mm Spindle-column center distance 260 mm Spindle 20 mm Work surface 475 x 425 mm Work surface material cast iron Table inclination 0-45° Column diameter 92 mm Overall dimensions mm 480 x 800 x 1700 h Weight kg 144

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Bodpfx Acsu Nm Nisyslp Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: used, The Nagel Citoborma 280 Paper Drill is a reliable two-head drilling machine designed for precision and efficiency in professional finishing environments. Operating on a 380 V power supply, it offers a drill diameter range of 2 to 20 mm and can handle a stack height of up to 60 mm, making it suitable for a wide variety of paper drilling applications. Bsdoxd Aqqspfx Acyolp Currently located in a printshop in Germany, the machine is in good working condition and continues to provide accurate, consistent results. Compact yet robust, the Nagel Citoborma 280 remains a trusted solution for bindery and finishing operations requiring dependable paper drilling performance. Equipment: Power supply 380V. Two drilling heads. Drill diameter 2-20 mm. Stack height 60 mm.

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Bljdpfx Acjw Rag Deysp Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) Bjdev H D N Rjpfx Acyolp -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Bsdoxn A Spopfx Acyjlp Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21270 Specifications: Model year: 2016 Drilling hours: approx. 1400 Weight: 10,000 kg Undercarriage (see pictures) Winch Ready for delivery Blodsxatqmspfx Acyop Description:2016 Sandvik Dino DC400Ri drilling rig with an almost new undercarriage.The undercarriage was replaced after the last job.The rig is ready for delivery. Own weight: 10000 Model: DC400RI

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Please provide reference number upon request: 18549 Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Bjdsvgy E Uopfx Acyslp Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500

Condition: used, Year of construction: 2005, Serial number: 1xxxx Please contact ATS Norway for more information Bjdpfxsxbbcgj Acyjlp Please provide reference number upon request: 21280 Specifications: 2005 model 16,457 engine hours 9,610 drilling hours Weight: 8,500 kg KW: 88 Steel tracks Winch Description:Nemek 407 TS drilling rig for sale on behalf of customer – a versatile rig for drilling e.g. energy and water wells.The rig is described as operational but in need of minor service. Own weight: 8500 Engine hours: 16457 Model: 407 TS