Used Directional Drilling for sale (8,673)

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, The authorized SUBARU dealer in Łaziska Górne has a 2012 Vermeer D9x13 Series 2 horizontal directional drilling rig for sale, with 5650 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. In addition, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 hp / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle rotation speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid tank/mixer from 2021, which is a perfect match for this model and constitutes a practical set for carrying out small and medium-sized directional drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Dodpfx Alszumt Rs Aswc Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 hp Dimensions: approximately 185 × 81 × 136 cm Curb weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid tank. The stated price is net and applies to export and to companies. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: new, Year of construction: 2026, functionality: fully functional, Alignment press system Push and pull force 24/30 t Hydraulic station 50 m rod Expander 80/132/160/200 mm Without locator device Dwjdpfsuy N H Ejx Al Aoc Price: €27,000.00 net Dry drilling: no bentonite use, no bentonite disposal

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Dodpfx Alszk Nuis Aowc - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Dwedpjzn Ah Refx Al Aoc Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm Dwedez I Ub Hopfx Al Ajc throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Dwodjz N R Uaepfx Al Asc Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Dodpoz N R Uyofx Al Aowc Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, Dsdpfxsz N R Umo Al Ajwc weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Dsdpfoz Ekggex Al Ajwc Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: excellent (used), Year of construction: 2014, Axle: 920 mm X-axis: 3000 mm Material thickness: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Dwedpfjfmdcqox Al Asc Required extraction capacity: 2300 m3/h Location: available at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, CORMAK WS16 Bench Drill Press The CORMAK WS16 Bench Drill Press is a compact yet exceptionally robust column drilling machine for metal, designed for precise drilling and tapping operations in workshop and production environments. Thanks to the automatic reversal of the spindle rotation direction, the machine enables efficient thread tapping in steel, making it an excellent solution for users who value efficiency and high machining quality. Main Advantages of the Machine - Integrated tapping function with automatic reversal to counterclockwise rotation – simplifies the internal thread tapping process. - High spindle rigidity – ensures precise operation even under heavy loads and when machining harder materials. - Robust construction made from seasoned cast iron components – provides operational stability and a long machine service life. - Large spindle travel of 100 mm – offers an extended working range, particularly when drilling deep holes. - Clear and easy-to-use control panel – intuitive machine operation with quick parameter adjustments. Dodpforif S Rsx Al Aewc - U-shaped spindle guard with a safety limit switch – CE compliance and enhanced operator safety. - 360° rotating worktable with mounting slots – provides flexibility when clamping and positioning workpieces. Construction and Technology The CORMAK WS16 Bench Drill Press for Metal has been designed with an emphasis on strength and durability. The drill head, column, base, and worktable are manufactured from high-quality seasoned cast iron, ensuring exceptional rigidity throughout the entire structure. The spindle and transmission shafts are made from heat-treated, hardened steel, minimizing wear during prolonged operation. The drive mechanism is based on a belt transmission system, a solution valued for its quiet and stable performance. Precision and Operating Efficiency With a 5-speed spindle adjustment ranging from 480 to 1875 rpm and an MT2 Morse taper, the machine allows optimal machining parameters to be selected according to the material type and drilling diameter. The maximum drilling diameter in steel is 16 mm, while tapping operations can be performed up to M10. The clear control panel and the ability to reverse the spindle rotation direction significantly simplify operation while increasing overall machining efficiency. Applications The CORMAK WS16 Column Drill Press is perfectly suited for: - Metalworking and mechanical workshops. - Maintenance departments. - Training workshops and educational centers. - Single-piece and small-batch production. - Applications requiring high repeatability and precision in drilling and tapping operations. Standard Equipment - Adjustable keyed drill chuck (MT2 Morse taper) - Morse taper drift for tool removal - Spindle guard with safety limit switch (CE compliant) - Belt drive guard with safety limit switch Technical Specifications Maximum drilling diameter (steel) 16 mm Maximum tapping size (steel) M10 Column diameter 70 mm Column wall thickness 12.7 mm Spindle travel 100 mm Spindle-to-column distance 193 mm Maximum spindle-to-table distance 330 mm Maximum spindle-to-base distance 613 mm Spindle taper MT2 Spindle speed range 480–1875 rpm Number of spindle speeds 5 Table dimensions 265 × 285 mm Base dimensions 360 × 480 mm Machine height 1130 mm Motor power 1.1 kW Power supply 400 V Net weight 131.5 kg Machine dimensions 600 × 400 × 1150 mm

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Dedpfx Alevvi I Rj Aowc

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 4: edge bander batch 1 IMA-CUTTING,EDIGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDIGING,DRILLING LINE Dodpfx Alsz Nx Hks Aswc Position 6: Robot IMA-CUTTING,EDIGING,DRILLING LINE

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Dwsdpoz Inhgjfx Al Ajc Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1,900 mm Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate feeding conveyor length: 8 m Approximate removal conveyor length: 5 m Includes a wide conveyor for removing metal scrap.

Condition: good (used), Year of construction: 2005, machine/vehicle number: PRJ035402, functionality: fully functional, spindle mount: MK 4, total width: 450 mm, total length: 720 mm, total height: 1,861 mm, table width: 370 mm, table length: 500 mm, overall weight: 510 kg, We offer this well-maintained ALZMETALL AB 40/SV pillar drilling machine, manufactured in 2005. Manufacturer: ALZMETALL Model: AB 40/SV Year of manufacture: 2005 Condition: good Serial number: PRJ035402 Drilling capacity in steel St60: D40 mm Drive: Continuously variable with a 2-speed gearbox Spindle speed: 70-4000 rpm Tool holder, short spindle: MK4 Overhang: 300 mm Column diameter: 145 mm Spindle stroke: 160 mm Feeds: 0.1/0.2/0.3/0.4 mm/rev Table clamping surface: 500 x 370 mm Max. table load: 160 kg Distance spindle-table min/max: 147/688 mm Distance spindle-base plate (top edge): 1162 mm Distance spindle-base plate (bottom edge): 1267 mm Dedpfxsz Nd Slj Al Ajwc Base plate (unmachined): 720 x 450 mm Machine height: 1861 mm Weight approx.: 510 kg Space requirement approx. (L x W): 720 x 450 mm Technical data without guarantee. Errors and prior sale reserved.

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Djdpfxsu Idkzs Al Aswc Table can be swiveled and adjusted in height. *

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Location: Waalwijk, Netherlands Dwedpfx Asz I Tahsl Aoc Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: ready for operation (used), Year of construction: 1985, Available for immediate pickup at our location: Dwodpfez I Nkvox Al Aoc Radial drilling machine TOA Type TRD 1000 F Year of manufacture 1985 Outreach 1000 mm Installation height 800 mm Taper shank MK 4 Spindle speeds 50 – 1230 rpm Drive power 4 kW Rotary table Vise Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter): 2-20 mm Overhang: 210 mm Drilling stroke: 100 mm Distance spindle/table max.: 450 mm Speed range: 355 – 710 – 1400 - 2800 rpm Spindle taper: MK2 Dwodez H T Dkspfx Al Ajc Table clamping surface: 340x280 mm Total power requirement: 1.1 kW Machine weight approx.: 165 kg

Condition: used, Year of construction: 2007, Manufacturer IXION GmbH & Co. KG, Germany Model / Type TLF 1004 Machine type CNC deep drilling and milling machine Year 2007 Machine number 950-483 Axis Travels and Rotary Table Dwsdpjz Nyz Nofx Al Aoc X-axis travel 2,000 mm Y-axis travel 800 mm Z-axis travel 2,000 mm B-axis rotary table 360 degrees

Condition: good (used), functionality: fully functional, Gillardon GB30 pillar drilling machine Speed range: 60-1600 rpm Spindle taper: MK3 Overhang: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Drill spindle stroke: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970mm Dsdpfx Alsz Ngr Ie Aowc Weight approx. 400 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Alzmetall pillar drilling machine AB 35 S MK 4 Spindle speeds: 130 - 3500, stepless with 2 gear stages Right and left rotation 3-step feed Original paint Table: 620 x 470, no pre-drilled holes Overhang: 300 Column: 150 Drilling stroke: 180 Coolant system, quick-action drill chuck, emergency stop, tachometer – all in working order. Dimensions: H 1.97m, D 0.95m, W 0.62m Weight: approx. 600 kg Condition: original, runs smoothly and quietly, excellent runout. Free loading at D-88433 Schemmerhofen. Dodpfx Aloz I N Tqo Aowc

Condition: ready for operation (used), functionality: fully functional, ARBOGA UM 3008 / Drilling and Milling Machine -Spindle speeds / 8 stages / 105 - 3020 rpm -Gear / Gear head / Swiveling and tilting -Tool holder MK 3 -Drilling capacity / Steel max. 30mm -Drilling depth / Quill stroke approx. 130mm Dsdpfx Aoz Hy Hrel Aowc -Max. distance - Spindle / Table approx. 600mm -Cross table 585x245mm, adjustable via crank Dimensions: L x W x H 0.9 x 0.8 x 1.9 meters / Weight approx. 600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These compressors with fixed speeds are particularly well suited as base load compressors. Separation system – highest compressed air quality through proven multi-stage separation Air Control P – the intelligence of the compressor; it thinks, monitors and documents. Thanks to the possible internet connection, there are practically no limits to communication. Drive system – highly efficient, reliable direct drive Compressors – powerful, excellent efficiency Cooling unit – large-surface coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures System fan – powerful, efficient, high-performance Drive motor – robust, designed with power reserves ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Dedpsttucgofx Al Ajwc Motor power: 75 kW Volume flow according to ISO 1217 (Appendix C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total volume delivered: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available on request!

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Thickness: 3-12 mm Hole diameter: 6-40 Working height: 600 ±50 mm Power: 22 kW Dwsdpfxoz Ihfxs Al Asc