Used Daewoo 225 Lcv for sale (68)

Condition: like new (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1435, turning length: 648 mm, turning diameter: 420 mm, spindle bore: 76 mm, spindle speed (min.): 45 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 20 m/min, rotational speed (max.): 4,500 rpm, feed rate Z-axis: 24 m/min, overall weight: 4,100 kg, center height: 240 mm, Equipment: rotational speed infinitely variable, SOLD Machine is sold Very nice PUMA 240MSB With subspindle and driven tools And chip conveyor. Very few operating hours. 8000 hours power on Subspindle max 6000 RPM Control: 18ITS with Manual Guide Bar Feeder LNS Ncodpfjywkwhsx Afajr

Condition: ready for operation (used), Year of construction: 2001, CNC Lathe Daewoo Puma 230 SB — Year of manufacture: 2001 Controlled axes: 3 (X – Z – B) CNC control: Fanuc Series 18-T Max. swing diameter over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mount: ASA A2-6" Three-jaw chuck: 2 x collet chucks Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW Travel X-axis: 205 mm Travel Z-axis: 580 mm Turret: 12 positions Sub spindle Nsdpoy Ezg Aofx Afascr Chip conveyor: included Bar feeder 3 meters Machine weight: 4,240 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 170 mm, rotational speed (max.): 8,000 rpm, The machine is in good technical condition, connected and available for testing, with a 30-tool magazine and Fanuc control system. Ncsdsy Ewwqspfx Afaer

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Lathe Ncjdpfsy Dctujx Afasr

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Lathe Model Puma 2500 CNC Fanuc Nedpsy Dcq Hofx Afaocr Year: 1998

Condition: used, Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 330 mm, turning length: 548 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,740 mm, total length: 2,997 mm, total width: 1,670 mm, feed length X-axis: 205 mm, feed length Z-axis: 580 mm, quill travel distance: 580 mm, quill diameter: 75 mm, quill stroke: 80 mm, swing diameter over cross slide: 330 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 25 m/min, workpiece weight (max.): 350 kg, type of input current: three-phase, overall weight: 4,240 kg, spindle nose: A2-6, center height: 255 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Puma 230B CNC Lathe — Year 1999 Controlled axes: 2 (X – Z) CNC Control: Fanuc Series 18-T Ncsdpfx Aoy D Higefaor Max. swing over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mount: ASA A2-6" Chuck: Ø 210 mm — 3 jaws Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW X-axis travel: 205 mm Z-axis travel: 580 mm Turret: 12 positions — no driven tools Tailstock: present (quill Ø 75 mm, stroke 80 mm, MT 4) Chip conveyor: included Machine weight: 4,240 kg CE compliance: yes

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires, Ncjdpfxevcf Rns Afaor

Condition: good (used), Year of construction: 2006, Parts shown by hand not come with machine. Nedpfx Afjyzyhqoaecr

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Njdpfoy Akdljx Afaecr 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Machine is in excellent used condition Videos can be sent on request

Condition: used, Year of construction: 1995, operating hours: 6,807 h, lifting height: 4,730 mm, free lift: 1,670 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, fork width: 1,040 mm, total height: 2,150 mm, total length: 2,610 mm, total width: 1,200 mm, color: other, Empty weight: 4.622 kg Lifting capacity: 2.500 kg - Year: 1995 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 15-01331 - Operating hours: 6807 - Lifting capacity: 2500kg - Lifting height: 4730mm - Overhead clearance: 2150mm - Free lift: 1670mm - Fork length: 1190mm - Maximum fork width: 1040mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage - Options: Free-lift, Half cabin, Work lights - Mast: Triplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 2610mm x 1200mm x 2150mm (l x w x h) - Transport weight [kg]: 4622kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Njdjyyqtbspfx Afaocr Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nodpfxeyuxm Do Afascr Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2003, operating hours: 232 h, travel distance X-axis: 390 mm, travel distance Z-axis: 780 mm, spindle motor power: 30,000 W, overall weight: 9,000 kg, number of axes: 2, Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine. Nodpfsyymnbox Afaecr • Electrical supply: AC 380/400 V, 3-phase, PE, 50/60 Hz • Rated power: 54.04 kVA • Current at full load: 78.01 A • Interrupting current: 9000 A • Electrical schematic version: PV15H688A03 Technical Specification Driven Tools No

Condition: used, DAEWOO PUMA 300 LB (Doosan) Njdpfx Afsqfm A Ajajcr 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy

Condition: used, Torni CNC Doosan Puma TW2600 Nedpfx Afsw Slx Usaecr 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Nsdpfstzgaqex Afaecr Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: used, Year of construction: 2025, fuel type: diesel, power: 5 kW (6.80 HP), total length: 800 mm, total width: 600 mm, total height: 600 mm, Power: 8.1 Current frequency: 50 Hz Nsdpfoyay Tisx Afajcr Voltage: 230/400

Year of construction: 2001, condition: good (used), Parts shown by hand not come. Technical book with characteristics of machine is in attachment. Nsdpfxolyrbzo Afascr

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Parts shown by hand not come. Njdpfx Afew Tc S Ujaocr Technical details are shown on picture.

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Nodswb Aqnopfx Afajcr Technical data are shown on picture.

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. • Daewoo MYNX 540, Baujahr 2001 • die Spindel wurde im Frühling 2025 revidiert, neue Lager!! • die 4.Achse gehört mit dazu • ACHTUNG, das liegende 3-Backenfutter NICHT Arbeitsbereich X-Achse mm 1020 Y-Achse mm 510 Z-Achse mm 625 Aufspanntisch Tischgrösse mm 1200 x 500 4 T-Nuten mm 18H8 T-Nuten Abstand mm 125 Abstand Tisch-Spindelnase mm 150 - 775 Abstand Spindelmitte-Ständer mm 520 Tischbelastung kg 800 Spindelstock Antriebsleistung kW 11/15 Ncsdpfxjyfg Tas Afasr Drehzahlbereich, stufenlos U/min 80 - 8000 Bereich konstanter Leistung U/min 750 - 8000 Drehmoment, max. Nm 190 Spindelkonus DIN 69871A ISO 40, SK40 Anzugsbolzen DIN 69872 STANDARDZUBEHOER • - FANUC CNC-Bahnsteuerung Modell 21 i-MA mit 9,5" LCD Monochrom Bildschirm, • Teileprogrammspeicher 32 kB/80 m • - RIGID TAPPING - Gewindebohren ohne Ausgleichsfutter • - 24-fach Tellermagazin • - Werkzeugaufnahme im Spindelkonus ISO 40, DIN 69871A/DIN 69872, SK40 • - FANUC AC-Hauptantrieb mit 11/15 kW Motor • - Drehzahlbereich 80-8000 U/min, stufenlos • - Kühlmittelversorgung aus dem 300 Litertank, Pumpe 1,5 bar SONDERZUBEHOER • - Spindelölkühler • - Kühlmittelzufuhr durch die Spindel (Form A) DIN 69871 • mit 10 bar Pumpe und Patronenfilter • - Kühlmittelpumpe 6 bar • - Vorbereitung für 4. Achse • - KITAGAWA CNC-Rundtisch Typ RS 250 RAHO • mit Motor Fanuc und 4. Achse in Maschine

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 RPM Squeegee width: 850 mm Ncodpexr N U Esfx Afaer Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing capacity: 2% Battery voltage: 24 V, 100 AH - 24 V battery charger - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: PM301222, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 282 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, quill travel distance: 100 mm, quill diameter: 100 mm, overall weight: 5,000 kg, spindle nose: A2-8, bar diameter (max.): 77 mm, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, documentation/manual, DAEWOO PUMA 300 B CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 10.499 A - Connection: 40.01 kVA - Swing diameter over bed: 570 mm - Swing diameter over carriage: 370 mm - Recommended machining diameter: 255 mm - Max. machining diameter: 400 mm Nedpfx Afjyvru Ssaocr - Max. working length: 648 mm - Bar capacity: 77 mm - Chuck diameter: 255 mm - Front spindle bearing diameter: 130 mm The machine is equipped with a tailstock, a 10-station turret, as well as a three-jaw chuck from SMW AUTOBLOK, diameter: 260 mm, and a chip conveyor. Attention: The item must be collected on a binding date, to be arranged, between 12.05. and 22.05.2026. FCA D-74821 Mosbach – loaded onto truck.

Condition: used, Year of construction: 2000, DAEWOO PUMA 300 LM Lathe CNC lathe with C axis Live tools: 4 units – 2 radial + 2 axial CNC FANUC 18-T CAPACITY Swing diameter over bed: 590 mm Swing diameter over cross-slide: 450 mm Max turning diameter: 355 mm Max turning length: 1233 mm Bar passage: 76 mm Max drilling diameter with driven tools: 20 mm Max tapping diameter with driven tools: M16 TRAVELS X axis: 250 mm Z axis: 1330 mm SPINDLE Speed: 35 - 3500 rpm Spindle nose: ASA A2-8 Motor: 18.5/22 kW POWERED TURRET 12 stations for live tooling Live tool rotation speed: 40-4000 rpm AUTOMATIC TAILSTOCK Quill diameter: 100 mm Tailstock: MT5 Quill travel: 100 mm Total power: 50 kW Machine dimensions: 3990x1660x H 1820 mm Weight: 6700 kg INCLUDES Chip conveyor Ncodpfx Aoyx A Rvsfajr

Condition: excellent (used), Year of construction: 1998, Control Fanuc OT with electronic handwheel Swing diameter over bed Nsdpfx Afeyxp Hwsaecr 700 mm Travel path - X 362 mm Travel path - Z 1,055 mm Speed range 1 20–2,000 rpm Chuck diameter 400 mm Tool turret 10 positions Chip conveyor yes Rapid traverse X-axis 16,000 mm/min Rapid traverse Z-axis 20,000 mm/min Total power requirement 50 kW Machine weight approx. 9 t Space requirement approx. 5.1 x 2.4 x 2.3 m Control system CNC Control name FANUC

Condition: good (used), Year of construction: 2002, machine/vehicle number: AV4C0039, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, travel distance X-axis: 570 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, number of slots in tool magazine: 32, overall weight: 7,600 kg, coolant supply: 15 bar, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, nominal power (apparent): 40 kVA, number of spindles: 1, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 32 m/min, rotary table diameter: 712 mm, spindle nose: DIN ISO40, spindle speed (max.): 8,000 rpm, table load: 300 kg, operating hours of spindle: 50,000 h, Equipment: documentation/manual, rotational speed infinitely variable, Machine is very well mantained and running in our production.Two pallets, DIN ISO40, Fanuc 18i-M Njdpjvt Sgqofx Afajcr