Used Auger Drill for sale (5,174)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Virtually as-new machine Traded in for CNC after only a few months of operational use. Cjdpfx Afox Rcuxogehc - R0.22.16 CE version - 58.01.03 Automatic horizontal/vertical movement of the drill head - 59.03.93 Servo-controlled adjustment of the descent speed of the drilling group - 58.01.00 Tool holders diameter 10 mm - 58.01.18 Pneumatic hold-downs

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Chsdpfx Afertrx Rsgec Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. Chodpfx Afezt H Nvegjc The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Codpfx Aoz Inhgofgjhc Minimum workpiece length: 1,900 mm Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate feeding conveyor length: 8 m Approximate removal conveyor length: 5 m Includes a wide conveyor for removing metal scrap.

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Chjdpfx Aoz Ixmajfgoc Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter): 2-20 mm Overhang: 210 mm Drilling stroke: 100 mm Distance spindle/table max.: 450 mm Speed range: 355 – 710 – 1400 - 2800 rpm Spindle taper: MK2 Chodpfxez H T Dkj Afgjc Table clamping surface: 340x280 mm Total power requirement: 1.1 kW Machine weight approx.: 165 kg

Condition: ready for operation (used), functionality: fully functional, Pillar drill / ALZMETALL AB 3 ES from a vocational school - Well-maintained, original condition - Drilling capacity / steel max. 35mm - Arm reach 280mm - Table size 600x470mm - Drilling stroke 180mm - Morse taper MK 3 - Stepless speed control - Drilling depth stop - Speed indicator Cjdpfx Aez Iht Nofgehc - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight 500 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, ARBOGA UM 3008 / Drilling and Milling Machine Cedpfx Aez Hy Hrjfgehc -Spindle speeds / 8 stages / 105 - 3020 rpm -Gear / Gear head / Swiveling and tilting -Tool holder MK 3 -Drilling capacity / Steel max. 30mm -Drilling depth / Quill stroke approx. 130mm -Max. distance - Spindle / Table approx. 600mm -Cross table 585x245mm, adjustable via crank Dimensions: L x W x H 0.9 x 0.8 x 1.9 meters / Weight approx. 600 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Chedez Ihfxjpfx Afgec Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Thickness: 3-12 mm Hole diameter: 6-40 Working height: 600 ±50 mm Power: 22 kW

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm - Filter Chjdoxzz Hopfx Afgoc - Pump

Condition: excellent (used), Year of construction: 2006, Mt5 x 1,600mm, 25-2,000Rpm Chedpfxoz Il R Eo Afgsc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 9,500 mm, total width: 1,000 mm, overall weight: 3,000 kg, Silo discharge screw conveyor for dried or wet sawdust. The system is in new condition and comes in its original packaging. The photo is a sample image – the system has never been installed. Discharge screw conveyor for silo internal diameter of 8.9 m. Discharge rate: 40 m³ per hour. Drive power: 15 kW. Lower section: for accommodating the screw conveyor drive, feed drive, main shaft with metering device, and bearings, discharge chute, and blockage sensor. Codpez Ix Iqjfx Afgjhc Upper section: with screw shaft, cross-roller swivel joint, and cover hood. Electrical control system is not included!

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Codpfx Afoyt Spcsgshc

Condition: ready for operation (used), Gillardon GB 40 VE 40-1100 Drilling Machine, Bench Drill Drilling capacity (steel): approx. 40 mm Drilling capacity (cast iron): approx. 50 mm Codpfxoz H U Hmo Afgehc Threading capacity: M27-M33 Tool holder: MK4 Speed range: 60-1600 rpm (stepless) Feed rate range: approx. 0.1; 0.16; 0.25 mm/rev Albrecht drill chuck: 3-16 mm Spindle stroke: 200 mm Overhang: 350 mm Space requirement: 1200 mm x 800 mm x 2100 mm (L x W x H) You are welcome to visit us for an inspection. We would be happy to arrange an affordable shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Csdpsz Ii Tdefx Afgehc Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual

Condition: used, Year of construction: 1972, Technical details: bore capacity in steel (diameter): 25 mm throat: 300 mm bore stroke: 630 mm spindle turning speed - continuous: 150 - 2860 U/min spindle taper MT: MK 4 Distance spindle/table max.: 630 mm table-size: 300 x 400 mm total power requirement: 1,65 kW weight of the machine ca.: 700 kg Chjdpfx Afszfltdogoc dimension machine approx.LxWxH: 0,6 x 0,8 x 2,10 m

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Csdoz Dr U Nopfx Afgohc Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. Cedpfx Afoz Dtaajgjhc The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Used horizontal boring mill/drilling machine by Cornac Cjdpfsz Iarqjx Afgehc Type BS 65 Spindle diameter 65 mm Table dimensions approx. 600 x 1000 mm X / Y / Z = 1000 / 800 / 650 mm

Condition: good (used), Further information available upon request. Cincinnati drill presses, various models. Cjdpfsz Ih Iyex Afgohc

Condition: good (used), Nagel Citoborma 290AB Paper Drill The machine is 100% functional and ready to use. Robust construction – weighs 200 kg. This is the current Citoborma drill model in production. 400V power supply. Two drilling heads with adjustable spacing ranging from 45-170 mm. Drill diameter: 2-20 mm. Stack height: 60 mm. Controlled by an electric foot pedal. Waste is directed to an external sleeve. Chjdpsz Dtagjfx Afgoc The drill table is adjustable in every direction (sides, front/back) and has stops for setting the drill spacing (non-standard drilling). Additionally, a special module for standard spacings is installed in the table. Furthermore, the table has two movable margins. The drill has an automatically released table lock after each cycle, allowing the table to be moved to the next position. The set includes drills, tools and instructions.

Condition: used, Vitap Classic Multi-Spindle Drilling Machine, 21 spindles, left/right-hand spindles, quick-release mounting, spindle spacing 32 mm, drilling in vertical or horizontal position, 2 pneumatic clamps, power supply 380V, 1.8 kW motor, Chsdpfx Afoz Hxi Ejgsc Machine ready for operation.

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm Chsdpfx Afsz Hb Ttegec y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm Chsdjz Hd Tpjpfx Afgjc

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm Chjdpfjz Hb Udox Afgec