Used Daewoo Mega 400 V for sale (55)

Condition: good (used), Year of construction: 2002, machine/vehicle number: AV4C0039, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, travel distance X-axis: 570 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, number of slots in tool magazine: 32, overall weight: 7,600 kg, coolant supply: 15 bar, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, nominal power (apparent): 40 kVA, number of spindles: 1, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 32 m/min, rotary table diameter: 712 mm, spindle nose: DIN ISO40, spindle speed (max.): 8,000 rpm, table load: 300 kg, operating hours of spindle: 50,000 h, Equipment: documentation/manual, rotational speed infinitely variable, Machine is very well mantained and running in our production.Two pallets, DIN ISO40, Fanuc 18i-M Godpfsvt Sgqsx Anksub

Condition: used, Year of construction: 2001, Daewoo Puma V300 CNC Lathe Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of installation: 2001 Kitagawa chuck, diameter 305 mm Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Gsdpfx Anoyahy Dsksub Max. turning height: 420 mm Spindle speed: 2,500 rpm AC motor power (cont./30 min.): 18.5 kW Turret with 8 tools Drilling diameter: 50 mm Tool section: 25 mm Control: Fanuc Series 18-T Equipped with chip conveyor Complete with documentation

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM Guedpfx Aoxp Nfxenkeb SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: good (used), Engine freshly overhauled (over 12tys zl). Godstt T Nfopfx Ankoub 100% operational I invite you to contact me

Condition: used, Year of construction: 2001, CNC FANUC 18i M X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM SPINDLE SPEED 6000 RPM SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR Gusdpfx Ajkx E Tbsnkjb ATC 40 PLACE 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Condition: used, Year of construction: 2003, machine/vehicle number: PV300200, total height: 2,718 mm, total length: 2,595 mm, total width: 1,824 mm, Lathe Daewoo Puma V300 CNC Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of manufacture: 2003.03 Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Max. turning length: 420 mm Gedpey Na R Uefx Anksub Spindle speed: 2,500 rpm Turret with 8 tool stations Control: Fanuc Series 18-T Weight: 5,500 kg With chip conveyor

Condition: ready for operation (used), Year of construction: 2003, operating hours: 232 h, travel distance X-axis: 390 mm, travel distance Z-axis: 780 mm, spindle motor power: 30,000 W, overall weight: 9,000 kg, number of axes: 2, Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine. • Electrical supply: AC 380/400 V, 3-phase, PE, 50/60 Hz Guedpfx Ajyymnbsnkeb • Rated power: 54.04 kVA • Current at full load: 78.01 A • Interrupting current: 9000 A • Electrical schematic version: PV15H688A03 Technical Specification Driven Tools No

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Gujdpjtzgaqsfx Ankob Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Guedpfx Ajxlkq Ujnkjb Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: used, DAEWOO DOOSAN D40S TRIPLEX - DIESEL All-Terrain Forklift ∗Very good overall condition, always stored indoors∗ ∗Fitted with all fork positioners∗ ∗All-terrain capable∗ ∗Minimal electronics∗ ● Enclosed cab (doors and rear made from transparent tarpaulin) ● Engine power: 58 kW / 79 HP ● Fuel: Diesel ● 2-speed automatic / torque converter transmission ● Unladen weight: 4,200 kg ● Rated capacity: 4,500 kg (at 500mm load center) ● Lifting height: 5,600 mm ● TRIPLEX mast with sideshift and fork positioner ● Fork length: 1,200 mm ● Dual front work lights Gedpfeyutk Rsx Anksub ● Rear lighting ● Pre-installed for rotating beacon ● Pre-installed for towing hitch ● Front tires: 8.25 - R15 / tire tread in good condition! ● Rear tires: 250/75 R12 solid rubber tires / tread in very good condition! - UVV inspection and maintenance: NEW! Errors and prior sale excepted! = More Information = Contact Joannis Arpantzanis or Kai Bühler for further information.

Year of construction: 2000, condition: excellent (used), machine/vehicle number: AV5C0171, Vertical machining center with 3 axes with rotopallet DAEWOO ACE VC500 FANUC 18-M Accessories: Chip conveyor belt High pressure cooling system 10 bar through the spindle line No. 2 rotary tables Comand TGV 200 Gusdpfx Anjga Edxekjb

Condition: used, Year of construction: 2002, DAEWO machining center Gujdpfxeupkilj Ankob ACE-VC 320

Condition: good (used), Year of construction: 2002, functionality: fully functional, FOR SALE: DAEWOO Lynx 210L CNC Lathe Compact and robust machine, ideal for the production of precision components. Technical Specifications Control System: FANUC Series 21i-T. Guedpey Sgnfjfx Anksb Turret: 12 tool stations. Clamping Device: Hydraulic 3-jaw chuck. Workpiece Support: Hydraulic tailstock included. Machining Dimensions (standard Lynx 210L): Max. turning diameter: ~280 mm. Max. turning length: ~500 mm. Manufacturer Data (Source: IMG_8345.jpeg) Model: Lynx 210L (Lynx 200 Series). Serial No.: L2002339. Total Weight: 4,240 kg.

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Gjdpfxevcf Rnj Ankeub Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Gsdpey Rnrvsfx Ankjub Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 640 mm, total length: 920 mm, total width: 442 mm, Tested forklift battery for your truck – 48V 3PZS 375AH – special tray + 1 year warranty + including aquamatic system + including end conductor & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length 920 mm Width 442 mm Height 640 mm Guodpey Rnl Nsfx Ankob Weight: approx. 610 kg Suitable for the following models and more: Toyota/BT CBT4 Daewoo BR13 Doosan BR15J-5 Nichiyu FBR20 Common battery sizes available, feel free to inquire. Transport possible.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck - 48V 3PZS 375AH - DIN B + 1-year warranty + includes automatic filling system (Aquamatik) + includes end cable & REMA 320 connector (other connectors can be installed on request) + Capacity: minimum 90–100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,030 mm Width: 349 mm Height: 627 mm Weight: approx. 580 kg Guedpfx Asy Rnihenkob Compatible with the following models and others: Daewoo BR14 Daewoo BR14 JW Daewoo BR16 Daewoo BR16 JW Fpsbqvmgyjwqdq Isyoi Mitsubishi FB15TCA Common battery sizes available on request. Transport available.

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Colour: Grey Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm Gedpfxoyuxm Dj Anksub - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 1995, operating hours: 6,807 h, lifting height: 4,730 mm, free lift: 1,670 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, fork width: 1,040 mm, total height: 2,150 mm, total length: 2,610 mm, total width: 1,200 mm, color: grey, Empty weight: 4.622 kg Lifting capacity: 2.500 kg - Year: 1995 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 15-01331 - Operating hours: 6807 - Lifting capacity: 2500kg - Lifting height: 4730mm - Overhead clearance: 2150mm - Free lift: 1670mm - Fork length: 1190mm - Maximum fork width: 1040mm - Minimum fork width: 210mm Gsdpfx Aoyyqtbjnkjub - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage - Options: Free-lift, Half cabin, Work lights - Mast: Triplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 2610mm x 1200mm x 2150mm (l x w x h) - Transport weight [kg]: 4622kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Guodpfx Anoyi Abhskeb

Condition: good (used), Year of construction: 2006, Parts shown by hand not come with machine. Gedjyzyhqopfx Ankeub

Condition: used, Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 330 mm, turning length: 548 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,740 mm, total length: 2,997 mm, total width: 1,670 mm, feed length X-axis: 205 mm, feed length Z-axis: 580 mm, quill travel distance: 580 mm, quill diameter: 75 mm, quill stroke: 80 mm, swing diameter over cross slide: 330 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 25 m/min, workpiece weight (max.): 350 kg, type of input current: three-phase, overall weight: 4,240 kg, spindle nose: A2-6, center height: 255 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Puma 230B CNC Lathe — Year 1999 Gsdpoy D Higofx Ankoub Controlled axes: 2 (X – Z) CNC Control: Fanuc Series 18-T Max. swing over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mount: ASA A2-6" Chuck: Ø 210 mm — 3 jaws Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW X-axis travel: 205 mm Z-axis travel: 580 mm Turret: 12 positions — no driven tools Tailstock: present (quill Ø 75 mm, stroke 80 mm, MT 4) Chip conveyor: included Machine weight: 4,240 kg CE compliance: yes

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Guodpfxey Akdle Ankeb Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Machine is in excellent used condition Videos can be sent on request

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Guedpjqfm A Aefx Ankjb Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy

Condition: used, Torni CNC Doosan Puma TW2600 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS Godpfxsw Slx Uj Anksub