Used Coloumn Drill for sale (4,494)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Fedpfxjx Uyzqe Adpjfw 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2004, operating hours: 10,948 h, 2004 | Soilmec R620 | Used Drill | 10948 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 121000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 55 approved ✅ 11 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: The drill is in good working condition. You can see the full report for all of the attachments that are included with the machine. Maybe new batteries will be needed, since the machine has not worked for about 1 year. The drill was not able to be fully tested on-site. It has a variable truck frame and 4 core drills. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40269 Equippo" is commonly used when looking up more details online. Ffodpfxsygxtzs Adpow 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm Fsdpfsxlqxfox Adpsfw - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, total width: 1,000 mm, total length: 2,500 mm, total height: 2,150 mm, Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No - Serial number: 73101 - Control: Conventional - Motor power: 2.0kW - Drilling depth: 250mm - Spindle speed max.: 2650rpm - Model: iaalboormachine - Tool holder: MK5 - Table width: 770mm - Table length: 1700mm - Drilling capacity: 45mm - Travel X: 1000mm - Travel Z: 600mm Ffsdsytf Ryspfx Adpew - Max. reach: 1450mm - Number of axes: 3 - Spindle speed min.: 60rpm - Transport dimensions: 2500mm x 1000mm x 2150mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995 Ffodpfx Adeytb Eyjpjw

Condition: good (used), Used drilling machine from Alzmetall Ffodpjytbz Usfx Adpew Model: AB 3

Condition: good (used), Year of construction: 2010, functionality: fully functional, Worktable size: 316 x 436 mm Ffjdpfx Adeyr Ntpspew Digital display Travel X, Y: 250 x 350 mm Diameter of electrode: Ø 0.4 mm; Ø 0.5 mm; Ø 1.0 mm; Ø 2.0 mm Z1 stroke: 300 mm Tank capacity: 25 l Machine size: 1060 x 750 x 2100 mm Machine weight: 600 kg

Condition: good (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Spindle diameter: 130 mm X-axis travel: 5000 mm Y-axis travel: 3000 mm Z-axis travel: 1600 mm W-axis travel: 800 mm B-axis: Double pinion 0.001° Rapid traverse: 10 m/min Table size: 1800 x 2500 mm Table load capacity: 25 tons Spindle power: 37 kW Ffedpfx Ajyr Nmiedpew Spindle speed: 3000 rpm Tool changer: 40-fold Chip conveyor

Condition: not inspected (used), machine/vehicle number: 42 255 016, functionality: unexamined, table width: 260 mm, table length: 340 mm, overall weight: 400 kg, spindle speed (max.): 4,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Table dimensions: 340 x 260 mm (with two T-slots) Spindle speed: 80 to 4,000 rpm MACHINE DETAILS Ffedpfoyr Iwajx Adpjw Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 2,100 mm Weight: 400 kg External reference: 52

Condition: like new (used), functionality: fully functional, 5 pcs drill rod adapters SANDVIK Model: T51 HL1000PE D52 L840 Part no.: 7306-6019-02 Ffjdpfx Aeyr Iqgjdpsw Total length: 840 mm Suitable for drilling rigs with long extractor (52 mm bearing diameter)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 8906, table width: 520 mm, table length: 770 mm, drilling depth: 160 mm, rotational speed (max.): 2,800 rpm, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid requires collection within the period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Fsdsyr Iqyepfx Adpefw Spindle speed: 80-2,800 rpm Drilling depth: 160 mm Table dimensions: 770 x 520 mm Number of T-slots: 4 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 2,100 mm Weight: 1,500 kg External reference: 50

Condition: used, total width: 800 mm, total length: 900 mm, total height: 1,900 mm, Empty weight: 500 kg - Documentation available: Yes - CE certificate present: No - Serial number: 120281 - Drive system: Conventional - Power [kW]: 1.5 - Table length [mm]: 620 - Table width [mm]: 460 - Drilling depth [mm]: 160 - Tool holder: MK3 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 1400 - Transport dimensions: 900mm x 800mm x 1900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ffjdjxz Egvepfx Adpjw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) Fodjwywwyepfx Adpjfw - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: not inspected (used), Year of construction: 1989, machine/vehicle number: 35232052, functionality: unexamined, rotational speed (max.): 2,500 rpm, rotational speed (min.): 160 rpm, table width: 320 mm, table length: 400 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04/05/26 and 07/05/26. Ffjdpfx Adsyr Inrjpow TECHNICAL DETAILS Spindle speed: 160 - 2,500 rpm Table dimensions: 400 x 320 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 3.1 A Power connection: 1.1 kW Dimensions & weight Dimensions (L x W x H): 600 x 500 x 1,800 mm Machine weight: 400 kg EQUIPMENT Thread cutting head by manufacturer EDALCO External reference: Lot 14

Condition: new, Year of construction: 2025, functionality: fully functional, table size: 800 x 240mm table longitudinal movement range: 400 mm table transverse movement range: 230 mm max. drilling diameter in normal steel D30 mm max. drilling diameter at horizontal head D25 mm distance between table plane and spindle face 60 – 360 mm speed range: 80 – 2200 rpm max. vertical spindle speed 100 – 2000 rpm max. horizontal spindle speed 60 – 1350 rpm Fedpfx Aoyr Ib Ejdpjfw spindle taper ISO40 spindle stroke 120 mm power 2.2 / 1.5 kW drilling capacity dia. 50 mm thread drilling capacity max. M16 dimensions 1300 x 1100 x 2200 mm (w x d x h) weight approx. 900 kg Accessories - 3-way SINO DRO system - 90 degree rotatable head bracket - 2 reducers (ISO40/MK3, ISO40/MK2) - drill head with shank, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 15-piece chuck set diameter 2 – 26 mm - work lamp - cooling water system

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Ffsdpfxoyfta Tj Adpjw Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Minor paint touch-ups; excellent condition—see original photos A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, travel distance W-axis: 350 mm, rotational speed (max.): 300 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding is binding and requires collection within the specified period: 04.05.26 to 07.05.26. TECHNICAL DETAILS Maximum workpiece dimensions (L x W x H): 840 x 460 x 350 mm Maximum workpiece weight: 150 kg Worktable dimensions: 600 x 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Rotational speed C-axis: 300 rpm MACHINE DETAILS Ffsdpfsyr H Ttsx Adpew Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Machine weight: 2,000 kg External reference: Lot 12

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 Ffodpfx Aeu R S Exjdpew - new exhibition machine -

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: Fjdeu R Tftopfx Adpefw - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 264237J, total width: 350 mm, total length: 450 mm, total height: 350 mm, overall weight: 70 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time between 04/05/26 and 07/05/26. MACHINE DETAILS Fodpfx Aeyr Hukjdpsfw Dimensions & weight Dimensions (L x W x H): 450 x 350 x 350 mm Weight: 70 kg External reference: 31

Condition: not inspected (used), Year of construction: 1999, machine/vehicle number: 55194, functionality: unexamined, drilling depth: 16 mm, rotational speed (max.): 2,580 rpm, table width: 230 mm, table length: 230 mm, spindle stroke: 80 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Drilling capacity: 16 mm Spindle travel: 80 mm Speed: 120 – 2,580 rpm Table dimensions: 230 x 230 mm Ffsdoyr Hr Njpfx Adpjw MACHINE DETAILS Connected load: 650 W Operating voltage: 400 V Dimensions & weight Dimensions (L x W x H): 650 x 350 x 960 mm Weight: 70 kg External reference: 29

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Fsdpfxevx Aqdj Adpofw Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Maximum drilling depth 85mm Spindle speed 2800r.p.m Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Number of motors 2×1.5kw Weight 450kg CE certificate

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. Fodpjyrz S Rofx Adpefw 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Stago PB 2015 Paper Drill This is the latest drill from Stago, originally from the office of a large company. The machine is 100% functional. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock. Sturdy construction – weighs approximately 70 kg. Ffodpeyrz Swsfx Adpsw 230V power supply Two drilling heads. Drill diameter: 2-10 mm. Stack height: 60 mm. The machine has an adjustable spacing between the heads. The drill has been serviced. Drills and tools are included.

Condition: excellent (used), Professional drill chuck from the renowned brand GEWEFA, made in Germany. Designed for clamping drills with a diameter from Ø2.5 to 16 mm in CNC machines, machining centers, and conventional milling machines. The high-quality construction ensures excellent concentricity, secure tool holding, and long service life even under intensive production work. Type: SK40 × Ø2.5–16. Catalogue number: 28.05.046.002. Taper: SK40 DIN 69871. Manufacturer: GEWEFA – Made in Germany. Year of manufacture: 2007. Condition: very good, used. An ideal choice for professional industrial applications and metalworking workshops specializing in precision machining. Price is per unit. Ffodpfx Aoxizaujdpow