Used Injection Mold Article for sale (12,301)

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm Bedou Nu N Repfx Acyjlp force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Bljdoxpu I Sspfx Acyjp Unit 5550: 3700 cm3

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Direct from toolmaking: Bljdpfx Asxrfqpjcyop ARBURG 420 C 1000-250 Year 2001, 43,600 operating hours, single owner, excellent condition, equipped as follows and for sale: 35 mm screw, Technical Level 2 servo-controlled clamping unit, horizontally movable injection unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, very well-maintained machine, can be inspected in operation. Without peripherals Dryer, conveyor, color mixer, hopper by MOTAN manufacturer optionally available at extra cost * ARBURG 320 C 600-100 Year 2005, only 36,500 operating hours, single owner, excellent condition, equipped as follows and for sale: 25 mm screw, second screw 30 mm, device for injecting at parting line, Technical Level 2 servo-controlled clamping unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, very well-maintained machine, can be inspected in operation. Without peripherals Dryer, conveyor, hopper by DIGICOLOR manufacturer and sprue picker by GEIGER MiniServo optionally available at extra cost

Condition: like new (used), Year of construction: 2011, operating hours: 48,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 45 mm, Engel Victory 750/300 Tech Horizontal injection moulding machine from Engel, model Victory 750/300 Tech, featuring a 300-tonne clamping force and CC300 control system. Manufactured at the end of 2011, with 46,000 hours of automatic operation. Extras (Full Production Cell): Engel Viper 20 robot (2011), safety guarding, and conveyor belt. The injection moulding machine is delivered RE-conditioned by our expert technical team and in excellent working condition. We can also offer your company commissioning service with a functionality guarantee upon installation completion. Technical Details OPENING STROKE: 907 mm YEAR OF MANUFACTURE: 2011 OPERATING HOURS: 48,000 PLATEN DIMENSIONS: 1100x1000 mm INJECTION VOLUME: 318 cm³ SCREW DIAMETER: 45 mm INJECTION PRESSURE: 1762 bar (2357 bar increased) Bedpsw Hwppofx Acyslp CLAMPING FORCE: 3000 kN

Condition: used, Year of construction: 1994, Used injection moulding machine from Engel Type: ES 500 100 HL Clamping force: 100 tons Bsdpfx Aexphz Eocyjlp Max opening stroke: 500 mm Hydraulic return stroke: 130 mm Max mould height: 250 mm Installation height: 750 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse. Blsdpfx Aow Tt R Iscyep

Condition: excellent (used), Year of construction: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine with Wittmann W 753 robot (year 2008), equipped with safety enclosure and conveyor belt Bledpfx Acjxq Eb Eeyjp Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (H × V): 2,150 × 1,880 mm Tie bar spacing (H × V): 1,500 × 1,250 mm Min./max. mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar Electrical – Hydraulic Equipment Pump motor rated power: 165 kW Heater power: 97 kW Dimensions and Weight Net weight (including control cabinet): 74 + 21 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service history / repairs 2010: New screw from RSP and barrel 2015: New Ibed 2015: New wiring plate 2017: New motor and pump 2 2017: New injection cylinder piston rod BS with seals 2017: Circulation pump replacement - oil cooler 2017: Teachbox replacement (Robot) 2018: P1 + P3 pump replacement (at 65,800 h) 2018: Hydraulic oil change

Condition: excellent (used), Year of construction: 2016, operating hours: 35,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 700 cm³, injection weight: 600 g, For sale: Injection moulding machine by Engel, model Victory 1050/300 The machine is in very good condition, fully functional, and available at the end of 2025. Technical specifications: Bsdexn Npzspfx Acyslp Year of manufacture: 2016 Operating hours: approx. 35,000 Clamping force: 300 t Screw diameter: 60 mm Shot volume (theoretical): 608–763 cm³ Shot weight: approx. 550–687 g Max. injection pressure: approx. 1,725 bar Platen size: approx. 1,100 x 1,100 mm Length: approx. 7.3 m Weight: approx. 19.8 t Equipment: - 1x hydraulic core pull - 12x electrical heating circuits - 4x Kistler mold cavity pressure sensors - 4x programmable I/Os - 8x temperature monitoring units - Needle shut-off nozzle - Host computer interface - Reject chute interface - 1x blow air valve A robot system was installed by the previous owner; this is not included. Photos available upon request. Transport and loading within Europe can be organized at an extra cost upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange welcome! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 Bjdsxcw T Rspfx Acyslp - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 251 cm³, injection pressure: 2,029 bar, injection weight: 272 g, mold height (min.): 300 mm, ejector stroke: 130 mm, opening stroke: 500 mm, plate length: 700 mm, plate width: 700 mm, type of input current: three-phase, pressing force: 120 t, For sale: 2003 machine, fully operational, with robot. Bedpfsxqyngsx Acyjlp

Year of construction: 2008, operating hours: 40,792 h, condition: ready for operation (used), functionality: fully functional, I am offering for sale an automatic injection molding machine from the renowned German manufacturer KURTZ GmbH, model K1318HP5MP. The machine was used in a production facility for processing EPP plastics. The device is equipped with all required CE markings and the manufacturer's nameplate. The machine stands out for its robust, heavy-duty construction and high reliability. Blodpfx Aexp Hvhocyop ⚙️ Technical specifications: Type: automatic injection molding machine / plastics foaming machine Control: semi-automatic / automatic Year of manufacture: 2008 Weight: 16 tons Power: 65 kW Power supply: 400 V Dimensions and further technical details available on request ✅ Condition and readiness: The unit was in continuous operation until recently We offer assistance with loading and transport

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Blodpsxn Aygofx Acyjp Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Shot volume: 392 cc Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Clamping unit: Hydraulic Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse

Condition: ready for operation (used), Year of construction: 2004, Injection moulding machine ENGEL DUO 4550/1100 WP Robot – ENGEL ERC 84-1E Year of manufacture: 2004 Operating hours: 70,250 Clamping Unit Clamping force: 11,000 kN Tie bar spacing (H × V): 1575 × 1320 mm Platen size (H × V): 2340 × 2040 mm Min./max. mould height: 592 – 1270 mm Max. opening stroke: 3016 mm Injection Unit Screw diameter: 90 mm Shot volume: 2480 cm³ Shot weight (PS): 2256.8 g Bsdpfxoxq D Scj Acyelp Injection pressure: 1910 bar Dimensions and weight Net weight (with control cabinet): 62 + 11 t

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Bljdpfx Askwb Discyep For further information or contact options, please visit our website

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 251 cm³, injection pressure: 2,029 bar, injection weight: 272 g, mold height (min.): 300 mm, ejector stroke: 130 mm, opening stroke: 500 mm, plate length: 700 mm, plate width: 700 mm, type of input current: three-phase, pressing force: 120 t, For sale: machine from 2004, fully operational Bledpfjxqyl Ssx Acyep

Condition: ready for operation (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Year of manufacture: 2004 Operating hours: 70,029 Clamping Unit Clamping force: 2,300 kN Mounting platen dimensions (H x V): 2,900 × 2,500 mm Tie bar clearance (H x V): 2,000 × 1,600 mm Min./max. mold height: 700 – 1,890 mm Max. opening stroke: 3,800 mm Blodpoxq D H Tofx Acyop Injection Unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar Dimensions and weight Net weight (incl. control cabinet): 113 + 18 t

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 Blsdpfx Acokv Uq Ioyjp The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 153 cm³, injection pressure: 2,174 bar, injection weight: 160 g, mold height (min.): 250 mm, ejector stroke: 100 mm, opening stroke: 450 mm, plate length: 700 mm, plate width: 700 mm, type of input current: three-phase, pressing force: 80 t, For sale: 2004 machine, fully operational, with robot. Bljdpfexqyhyjx Acyjp

Condition: excellent (used), Year of construction: 2002, Krauss Maffei Injection Moulding Machine KM 420-2700 C2 Year of manufacture: 2002 Machine Description The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise unit with a high clamping force of 4200 kN, designed for processing thermoplastics. Equipped with a reliable hydraulic system and a precision control system, it ensures stable and repeatable operation in demanding production environments. Technical Data Blodpjxq Akksfx Acyep Clamping Unit Parameter Unit Value Clamping force kN 4200 Max. mould opening force kN 250 Moving platen travel force – opening kN 124 Moving platen travel force – closing kN 102 Platen dimensions (H × W) mm 1270 × 1200 Tie bar spacing (H × W) mm 800 × 800 Mould opening stroke mm 1020 Minimum mould height mm 380 Maximum daylight mm 1400 Ejector force (forward / backward) kN 95 / 48 Maximum mould weight kg 6700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio - 20 Injection pressure bar 1829 Shot volume cm³ 1097 Shot weight (PS) g 998 Injection speed cm³/s 513 Max. plasticising rate g/s 108 Nozzle contact force kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating power kW 36 Number of heating zones – barrel - 7 Oil tank capacity l 1075 Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Condition: used, Year of construction: 2003, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 2,000 bar, injection weight: 300 g, mold height (min.): 394 mm, ejector stroke: 120 mm, type of input current: three-phase, pressing force: 130 t, ENGEL VICTORY injection molding machine with 130 tons clamping force, tie-barless, fully operational Bodpfx Acjxqdw Soyslp

Condition: excellent (used), Year of construction: 2007, Injection Moulding Machine Krauss Maffei KM 110-750 CX Year of manufacture: 2007 Machine Description The Krauss Maffei KM 110-750 CX injection moulding machine is a modern unit with a fully hydraulic clamping system. It is equipped with the MC5 control system featuring a color monitor, integrated control panel, and three USB ports. The machine is fitted with a complete plasticising unit designed for processing thermoplastics, with an abrasion-resistant version. The screw (diameter 45 mm) is equipped with a non-return valve and open nozzle. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 1100 Mould opening force kN 70.0 Movable platen stroke force – opening kN 35.4 Movable platen stroke force – closing kN 31.4 Platen dimensions (h × v) mm 745 × 770 Tie bar spacing (h × v) mm 470 × 470 Mould opening stroke mm 600 Mould height (min.) mm 300 Total daylight (max.) mm 900 Ejector stroke mm 150 Ejector force kN 22.6 / 9.9 Injection Unit Parameter Unit Value Screw diameter mm 45 Injection pressure bar 2336 Bledoxqzz Uopfx Acyjp Shot volume cm³ 318 Shot weight (PS) g 289 Screw speed (standard / option) rpm 265 / 355 Electrical and Hydraulic Equipment Parameter Unit Value Nominal pump motor power kW 22 Installed heater capacity kW 15.62 Number of cylinder heating zones - 5 Dry cycle time (Euromap) cycles/h 2000 Oil tank capacity l 489 Dimensions and Weight Parameter Unit Value Net weight with control cabinet t 6.2 Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1

Condition: used, Year of construction: 2013, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 405 cm³, injection pressure: 2,000 bar, injection weight: 397 g, mold height (min.): 300 mm, ejector stroke: 120 mm, opening stroke: 450 mm, type of input current: three-phase, pressing force: 200 t, For sale: Arburg 200T machine in very good condition. Blsdpfx Aoxqc Atocysp

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Blsdpfx Aoxqh I Iscyop Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: used, Year of construction: 1991, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 90 mm, clearance between the columns: 1,000 mm, displacement volume: 2,660 cm³, injection pressure: 2,370 bar, injection weight: 2,660 g, mold height (min.): 400 mm, ejector stroke: 120 mm, opening stroke: 1,050 mm, type of input current: three-phase, pressing force: 800 t, DEMAG 800 TON MACHINE FULLY FUNCTIONAL WITH ROBOT AND CASCADE CONTROL Bodexp Hizjpfx Acyslp

Condition: excellent (used), Year of construction: 2006, Injection Moulding Machine Arburg 320 C 400-170 Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Blsdpfsxqh Ihox Acyjp Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg